I've got a 20" long shaft that needs a 7/32" hole straight thru.

The shaft is roll-formed into a spline on the outside surface so I'm
guessing it has some built in stressors that will let go and make my shaft
less than straight. I need less than 0.003" runout on my outside spline
material per inch on this job and I really only need two made. The spline
can not be done after the gun drilling...

Any thoughts? Anyone able to do the gun drilling accurately for me and can
quote a price to me via e-mail?

Regards,
Joe Agro, Jr.
(800) 871-5022
01.908.542.0244
Automatic / Pneumatic Drills: http://www.AutoDrill.com
Multiple Spindle Drills: http://www.Multi-Drill.com
Production Tapping: http://Production-Tapping-Equipment.com/
Flagship Site: http://www.Drill-N-Tap.com
VIDEOS: http://www.youtube.com/user/AutoDrill
TWITTER: http://twitter.com/AutoDrill
FACEBOOK: http://www.facebook.com/AutoDrill

V8013-R

Joe AutoDrill wrote:
I've got a 20" long shaft that needs a 7/32" hole straight thru.

The shaft is roll-formed into a spline on the outside surface so I'm
guessing it has some built in stressors that will let go and make my shaft
less than straight. I need less than 0.003" runout on my outside spline
material per inch on this job and I really only need two made. The spline
can not be done after the gun drilling...

Any thoughts? Anyone able to do the gun drilling accurately for me and can
quote a price to me via e-mail?

Regards,
Joe Agro, Jr.
(800) 871-5022
01.908.542.0244
Automatic / Pneumatic Drills: http://www.AutoDrill.com
Multiple Spindle Drills: http://www.Multi-Drill.com
Production Tapping: http://Production-Tapping-Equipment.com/
Flagship Site: http://www.Drill-N-Tap.com
VIDEOS: http://www.youtube.com/user/AutoDrill
TWITTER: http://twitter.com/AutoDrill
FACEBOOK: http://www.facebook.com/AutoDrill

V8013-R




You're in Jersey correct? Maybe contact
http://www.henryrepeating.com/contact-henry-arms.cfm
They are in Bayonne and might be able to do the job.

--
Steve W.

You're in Jersey correct? Maybe contact
http://www.henryrepeating.com/contact-henry-arms.cfm
They are in Bayonne and might be able to do the job.

--

Steve W.,

Thanks for the lead. That's a double whammy for me. Cool guns and a
possible place to find a source.
--


Regards,
Joe Agro, Jr.
(800) 871-5022
01.908.542.0244
Automatic / Pneumatic Drills: http://www.AutoDrill.com
Multiple Spindle Drills: http://www.Multi-Drill.com
Production Tapping: http://Production-Tapping-Equipment.com/
Flagship Site: http://www.Drill-N-Tap.com
VIDEOS: http://www.youtube.com/user/AutoDrill
TWITTER: http://twitter.com/AutoDrill
FACEBOOK: http://www.facebook.com/AutoDrill

V8013-R

On Thu, 14 Apr 2011 14:24:19 -0400, "Joe AutoDrill"
wrote:

I've got a 20" long shaft that needs a 7/32" hole straight thru.

The shaft is roll-formed into a spline on the outside surface so I'm
guessing it has some built in stressors that will let go and make my shaft
less than straight. I need less than 0.003" runout on my outside spline
material per inch on this job and I really only need two made. The spline
can not be done after the gun drilling...

Any thoughts? Anyone able to do the gun drilling accurately for me and can
quote a price to me via e-mail?

Regards,
Joe Agro, Jr.
(800) 871-5022
01.908.542.0244
Automatic / Pneumatic Drills: http://www.AutoDrill.com
Multiple Spindle Drills: http://www.Multi-Drill.com
Production Tapping: http://Production-Tapping-Equipment.com/
Flagship Site: http://www.Drill-N-Tap.com
VIDEOS: http://www.youtube.com/user/AutoDrill
TWITTER: http://twitter.com/AutoDrill
FACEBOOK: http://www.facebook.com/AutoDrill

V8013-R


http://www.matthewsgauge.com/

Ask for Jeff.

Tell him Gunner refered you.


Gunner

--
"If I say two plus two is four and a Democrat says two plus two is eight,
it's not a partial victory for me when we agree that two plus two is
six. " Jonah Goldberg (modified)