I've got this unit I have bad convergence. And it looks like the
picture is pincusioned all around (top and bottom. Left and right)

I'm gonna be replaceing the STK392-110's. this week.. And will be
checking the resistors. Anyone have a pdf service manual handy that
i
can download and look at. Here is a picture of what its doing...


-Ron
a href="http://i24.photobucket.com/albums/c47/dj-darkfalz/
P3070004.jpg"

On Mar 9, 7:16*pm, Ronald wrote:
I've got this unit I have bad convergence. *And it looks like the
picture is pincusioned all around (top and bottom. Left and right)

I'm gonna be replaceing the STK392-110's. *this week.. And will be
checking the resistors. *Anyone have a pdf service manual handy that
i
can download and look at. *Here is a picture of what its doing...

-Ron
a href="http://i24.photobucket.com/albums/c47/dj-darkfalz/
P3070004.jpg"

Found problem with 1 ohm resistors.. opened up. replaced resistors
and unit works perfect again.

On Mar 9, 11:03*pm, Ronald wrote:
On Mar 9, 7:16*pm, Ronald wrote:

I've got this unit I have bad convergence. *And it looks like the
picture is pincusioned all around (top and bottom. Left and right)

I'm gonna be replaceing the STK392-110's. *this week.. And will be
checking the resistors. *Anyone have a pdf service manual handy that
i
can download and look at. *Here is a picture of what its doing...

-Ron
a href="http://i24.photobucket.com/albums/c47/dj-darkfalz/
P3070004.jpg"

Found problem with 1 ohm resistors.. opened up. *replaced resistors
and unit works perfect again.

So far new STK's got it running again.. I need to know if anyone knows
if this unit has any settings to move the picture from left to right.
I've looked though all the settings in the menus.. nothing to control
that function. The commands in the service menu only moves the
onscreen infomation not the picture.. ;( If anyone has access to a
service manual I'd love a copy of it (or knows where I can download
one from ... Thanks
-Ron

probably need to actually adjust the mechanical centering rings on the crts,
then readjust the registration.
wrote in message
...
On Mar 9, 11:03 pm, Ronald wrote:
On Mar 9, 7:16 pm, Ronald wrote:

I've got this unit I have bad convergence. And it looks like the
picture is pincusioned all around (top and bottom. Left and right)

I'm gonna be replaceing the STK392-110's. this week.. And will be
checking the resistors. Anyone have a pdf service manual handy that
i
can download and look at. Here is a picture of what its doing...

-Ron
a href="http://i24.photobucket.com/albums/c47/dj-darkfalz/
P3070004.jpg"

Found problem with 1 ohm resistors.. opened up. replaced resistors
and unit works perfect again.

So far new STK's got it running again.. I need to know if anyone knows
if this unit has any settings to move the picture from left to right.
I've looked though all the settings in the menus.. nothing to control
that function. The commands in the service menu only moves the
onscreen infomation not the picture.. ;( If anyone has access to a
service manual I'd love a copy of it (or knows where I can download
one from ... Thanks
-Ron