Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Anyone know if LinuxCNC is usefull
wrote in message news:1110520779.8a0ed961e022eb72a47a26154a255573@t eranews... Anyone know if LinuxCNC can run a tool changer with limit switches etc? I didn't see a clear answer at the web site as to what you have to do. Looks like the PLC would be a separate app under Linux. Jon Elson, are you lurking out there somewhere? ( Crossposted to rec.crafts.metalworking ) -- SVL |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Lilac bush/tree trunk usefull? | Woodturning | |||
Usefull roomstat accessory at sheds.. | UK diy | |||
can't pass up usefull trash | Metalworking |