cost of leather???
 

Would anyone have an idea of what leather costs, I need a piece on
the order of 12"X48" ,,,, about 1/4 " or less,???? And where would be
a good place to purchase.???

"Chuck Lorentzson" wrote in message
...
Would anyone have an idea of what leather costs, I need a piece on
the order of 12"X48" ,,,, about 1/4 " or less,???? And where would be
a good place to purchase.???

I think Jeff Gannon has some.

Try Husdon Belting in Wrocester MA.

Hudson Belting & Service Company Inc
85 East Worcester Street, Worcester, MA 01604
(508) 756-0090
(800) 640-8807

Errol Groff


On Thu, 17 Feb 2005 18:12:40 -0600, Chuck Lorentzson
wrote:

Would anyone have an idea of what leather costs, I need a piece on
the order of 12"X48" ,,,, about 1/4 " or less,???? And where would be
a good place to purchase.???

"Chuck Lorentzson" wrote in message
...
Would anyone have an idea of what leather costs, I need a piece on
the order of 12"X48" ,,,, about 1/4 " or less,???? And where would be
a good place to purchase.???

I've bought from these folks.
http://www.brettunsvillage.com/leather/scrap/scraps.htm

Larry

--
Lawrence L'Hote
Columbia, MO
www.llhote.com

Try tandy leather (tandy.com?). I got 3'x3' of 8-10 oz. (maybe 1/8-3?16")
for 20 bucks. They sell thicker stuff, but I don't know if they have what
you're looking for. Most of their stuff is vegetable tanned leather for
tooling and making stuff (I got it for knife sheaths).

-Will



"Chuck Lorentzson" wrote in message
...
Would anyone have an idea of what leather costs, I need a piece on
the order of 12"X48" ,,,, about 1/4 " or less,???? And where would be
a good place to purchase.???

In article ,
Chuck Lorentzson wrote:

Would anyone have an idea of what leather costs, I need a piece on
the order of 12"X48" ,,,, about 1/4 " or less,???? And where would be
a good place to purchase.???

Quarter inch thick leather is usually referred to as "saddle skirting",
and is always fairly pricey - I've got one full, and one partial "side"
(Essentially, half a hide each) of Hermann Oak (Veggie-tanned) sitting
here waiting for me to find time to finish turning 'em into a saddle.
Unless you can find a *VERY* kind seller, "by the side" is the only way
you're going to get a four foot long hunk. And you're going to pay
fairly steep for it. Each of my sides cost me close to $150.00 when I
bought them from Tandy. Pricing is almost always by the square foot, and
not many places are willing to mangle a hide (or a side) as badly as a
1'x4' hunk would require without you buying the whole thing first.

What are you trying to use it for? I'm guessing gasket/seal making, or
perhaps custom flat drive belts? If so, you DON'T want veggie-tan - For
one thing, it's too pricey, and for another, veggie-tan is going to suck
up oil like there's no tomorrow, and rapidly turn into mush. You're
probably going to want chrome- or ****-tanned if seals/gaskets are your
planned end product. That'll stand up to oil better, but it'll also be a
bit more pricey. If you're figuring on turning it into drive belts, you
DEFINITELY want chrome-tanned for the sheer strength.

If you're making belts, be aware that leather (whether chrome-, ****-,
or veggie-tanned) thick enough to classify as saddle skirting usually
isn't very flexible, and won't tolerate small-diameter pulleys well
without self-destructing. I personally wouldn't make any attempt to use
it on a pulley less than 6-8 inches in diameter, if that's what you're
trying to do.

--
Don Bruder - - New Email policy in effect as of Feb. 21, 2004.
Short form: I'm trashing EVERY E-mail that doesn't contain a password in the
subject unless it comes from a "whitelisted" (pre-approved by me) address.
See http://www.sonic.net/~dakidd/main/contact.html for full details.

In article ,
says...
Would anyone have an idea of what leather costs, I need a piece on
the order of 12"X48" ,,,, about 1/4 " or less,???? And where would be
a good place to purchase.???

Try this

http://www.tandyleather.com/

Paul Powell

--
The older I get, the better I used to be.

Chuck Lorentzson wrote:
Would anyone have an idea of what leather costs, I need a piece on
the order of 12"X48" ,,,, about 1/4 " or less,???? And where would be
a good place to purchase.???

Check out www.tandyleather.com



--
Gary Brady
Austin, TX
www.powdercoatoven.4t.com

When I used to buy leather Leather Unlimited had the best prices I could
find and gave good service: http://www.leatherunltd.com/

Karl

"Chuck Lorentzson" wrote in message
...
Would anyone have an idea of what leather costs, I need a piece on
the order of 12"X48" ,,,, about 1/4 " or less,???? And where would be
a good place to purchase.???

On Fri, 18 Feb 2005 01:11:32 GMT, the inscrutable "Lawrence L'Hote"
spake:

"Chuck Lorentzson" wrote in message
.. .
Would anyone have an idea of what leather costs, I need a piece on
the order of 12"X48" ,,,, about 1/4 " or less,???? And where would be
a good place to purchase.???

I've bought from these folks.
http://www.brettunsvillage.com/leather/scrap/scraps.htm

I'll second that. Nice guys. And they sell scrap piece lots
on Ebay, or used to.


--
"Giving every man a vote has no more made men wise and free
than Christianity has made them good." --H. L. Mencken
---
www.diversify.com Complete Website Development

Chuck Lorentzson wrote:
Would anyone have an idea of what leather costs, I need a piece on
the order of 12"X48" ,,,, about 1/4 " or less,???? And where would be
a good place to purchase.???

In Tandys email tonight
side of 13 to 15 oz. leather is $69.00 Can
You might check their web site for local sale price
Ken Cutt