 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
how to notch pipe
I need to cut a notch in the end of sched 40 3.5 inch pipe to allow 2 inch
pipe to pass through it. Available tools are reciprocating saw, drill press with bits up to 1 inch and bimetal hole saws, and cutting torch. What's the best way to do it? The notch needs to be snug because the 2 inch pipe will be welded to the 3.5 inch pipe using stick welding. Mike Note: To email me, use the address below with the q's removed: |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Need ideas for cutting clay sewer pipe | Home Repair | |||
| Replacing downstairs bog - soil pipe problems | UK diy | |||
| Joining Plastic Waste pipe to Lead pipe | UK diy | |||
| plastic air pipe | Woodworking | |||
| Replacing old steel water main supply pipe | UK diy | |||
Threaded Mode
