Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Parameter Fanuc 10ma
I have a Leadwell Mcv 2000D Ser no 86806 With a Fanuc 10ma control it
Lost all of its parameters. We Have all back but the spindle is not right and gear ranges. I think its in the 9000 parameter, Does any one have the list of the 9000, or the set up for spindle and gear range? |
#2
|
|||
|
|||
You might look at alt.machines.cnc.
richardt wrote: I have a Leadwell Mcv 2000D Ser no 86806 With a Fanuc 10ma control it Lost all of its parameters. We Have all back but the spindle is not right and gear ranges. I think its in the 9000 parameter, Does any one have the list of the 9000, or the set up for spindle and gear range? |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Parameter Fanuc 10ma
replying to richardt, Fahurtado wrote:
richardt wrote: I have a Leadwell Mcv 2000D Ser no 86806 With a Fanuc 10ma control it Lost all of its parameters. We Have all back but the spindle is not right and gear ranges. I think its in the 9000 parameter, Does any one have the list of the 9000, or the set up for spindle and gear range? Hi Richard, I have the same problem, I erased the memory and I lost the parameters of the machine. Its posible that you send me the parameters of your machine?.Any help you can provide me will be very grateful. Best regards, Felipe Hurtado -- posted from http://www.polytechforum.com/metalwo...ma-398861-.htm using PolytechForum's Web, RSS and Social Media Interface to rec.crafts.metalworking and other engineering groups |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
eBay: Takisawa VMC 50 Taper Fanuc CNC - $1 No Reserve | Metalworking |