DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Metalworking (https://www.diybanter.com/metalworking/)
-   -   Cleaning Brass (https://www.diybanter.com/metalworking/88404-cleaning-brass.html)

Lucifer January 26th 05 08:36 PM

Cleaning Brass
 
I just bought a torch and other brass attachments. Brass is tarnished and
dirty. What is the best method/products to use to clean them?
Thanks,
Steve



Dave Hinz January 26th 05 08:42 PM

On Wed, 26 Jan 2005 17:06:12 -0330, Lucifer wrote:
I just bought a torch and other brass attachments. Brass is tarnished and
dirty. What is the best method/products to use to clean them?


What color is the discoloration? Brown? Green? Something else?

Lucifer January 26th 05 08:48 PM

Some White, some Green and mostly a dark color all over.
I just tried some Steel wool on it, seem to take most of it off. Also heard
Brasso works wonders as well.

Thanks,
Steve

"Dave Hinz" wrote in message
...
On Wed, 26 Jan 2005 17:06:12 -0330, Lucifer

wrote:
I just bought a torch and other brass attachments. Brass is tarnished

and
dirty. What is the best method/products to use to clean them?


What color is the discoloration? Brown? Green? Something else?




carl mciver January 26th 05 11:00 PM

"Lucifer" wrote in message
...
| Some White, some Green and mostly a dark color all over.
| I just tried some Steel wool on it, seem to take most of it off. Also
heard
| Brasso works wonders as well.
|
| Thanks,
| Steve

Brasso works wonders. My wife finally made me get rid of my million
year old can of Duraglit. She doesn't know it, but I just put it somewhere
else where she won't find it. Don't even know if it is available for most
folks, I used gobs of it in the service.


Paul Calman January 27th 05 07:28 AM

Brass is tarnished and
dirty. What is the best method/products to use to clean them?


Lysol toilet bowl cleaner. I sh*t you not.
Just wipe it on, rinse with water, and apply a protectant, because it will
begin tarnishing immediately.

--
Paul Calman, Hathaway Pines, California



Tom Gardner January 27th 05 12:01 PM

Brass wire brush!

"Lucifer" wrote in message
...
I just bought a torch and other brass attachments. Brass is tarnished and
dirty. What is the best method/products to use to clean them?
Thanks,
Steve





Paul Calman January 27th 05 09:04 PM

Lysol toilet bowl cleaner. I sh*t you not.
Just wipe it on, rinse with water, and apply a protectant, because it will
begin tarnishing immediately.

My post from last nite doesnt show, sorry if it's redundant
--
Paul Calman, Hathaway Pines, California



Leonard & Peggy Brown January 28th 05 12:37 AM


"Lucifer" wrote in message
...
I just bought a torch and other brass attachments. Brass is tarnished and
dirty. What is the best method/products to use to clean them?
Thanks,
Steve

First dip in 50/50 water - muratic acid solution for a short while or until
the vigorous bubbling stops. IF you can't do that then get out the sand
paper and work it down until you can go to various stages of steel wool and
then brasso or take it to the nearest band instrument repair shop and have
them buff it for you. It will look like gold when they are done.

regards,
LB
--


Leonard Brown, DM (honoris causa)
Fellow of the Geyer Guild
horn builder



SPR January 28th 05 07:23 AM


"Lucifer" wrote in message
...
I just bought a torch and other brass attachments. Brass is tarnished and
dirty. What is the best method/products to use to clean them?
Thanks,
Steve


Why clean them? You'll just get them all dirty again... and maybe not use it
because of the work you put into getting it all nice and shiny! I'd just
make sure the valves are working correctly and all the passages are clean
and open. Plus, you stand the chance of damaging something by
over-aggressive cleaning.
my .02

--
Stephen P. Reimers
Naval Salvage Officer
BMW Motorcycle Rider



Grant Erwin January 28th 05 04:19 PM

SPR wrote:

"Lucifer" wrote in message
...

I just bought a torch and other brass attachments. Brass is tarnished and
dirty. What is the best method/products to use to clean them?
Thanks,
Steve



Why clean them? You'll just get them all dirty again... and maybe not use it
because of the work you put into getting it all nice and shiny! I'd just
make sure the valves are working correctly and all the passages are clean
and open. Plus, you stand the chance of damaging something by
over-aggressive cleaning.
my .02


I hear that! Boy, you would *never* catch me putting my torch into muriatic
acid .. how can you *guarantee* that you neutralize it afterward? I'd never
be able to sleep worrying if that acid was still eating away at the inside
of my torch.

If you have to make it pretty just get some Knorrostol and/or some Brasso and
a bunch of old cotton towels, put on some good tunes, brew up a big cup of
coffee, sit down and make it look pretty using the Armstrong torch polishing
machine your mom gave you. - GWE

[email protected] January 28th 05 04:31 PM


SPR wrote:
"Lucifer" wrote in message
...
I just bought a torch and other brass attachments. Brass is

tarnished and
dirty. What is the best method/products to use to clean them?
Thanks,
Steve


Why clean them? You'll just get them all dirty again... and maybe not

use it
because of the work you put into getting it all nice and shiny! I'd

just
make sure the valves are working correctly and all the passages are

clean
and open. Plus, you stand the chance of damaging something by
over-aggressive cleaning.
my .02

--
Stephen P. Reimers
Naval Salvage Officer
BMW Motorcycle Rider


I've proven to my satisfaction that cleaning off and polishing the
welding tips keeps them from popping out while welding in close
quarters where there's a lot of reflected heat. Might not make as much
difference with cutting tips and attachments. Given the state of the
torches and tips I see in the welding supply shop for repairs, you've
got a lot of company in your thinking, some look like they've been
dipped in asphalt. If they're polished to start with, not talking new
ones here, they're a lot easier to keep clean afterwards. Usually just
a wipe-down with a rag takes care of it. Maybe a little ultra-fine
Scotchbrite if there's some slag on there. I haven't worn out a tip
yet doing that. I used Brasso initially on my set of used tips and
handle, took a couple of hours to clean them up. Something to do while
watching the tube.

Stan


Leonard & Peggy Brown January 29th 05 03:29 AM



I hear that! Boy, you would *never* catch me putting my torch into

muriatic
acid .. how can you *guarantee* that you neutralize it afterward? I'd

never
be able to sleep worrying if that acid was still eating away at the inside
of my torch.

If you have to make it pretty just get some Knorrostol and/or some Brasso

and
a bunch of old cotton towels, put on some good tunes, brew up a big cup of
coffee, sit down and make it look pretty using the Armstrong torch

polishing
machine your mom gave you. - GWE


I agree on putting the torch itself in Muratic acid but I wouldn't have any
problems putting all brass items in the bath. On my instruments I usually
use a 20 to 1 ratio: If I have the part in muratic (50%+50% water) then I
leave it at least 20 minutes in water. I don't like dealing with acid but I
sure don't want to deal with more chemicals to get it off. I have been
doing this for 8 years now with no corrosion problems. I guess I would use
chemicals to neutralize if I was in a hurry... but I ain't.
The problem with Brasso is that it cleans up brass real good but doesn't
do much to other gook that is on top of the brass, other than oxidation.

LB



brad January 29th 05 05:36 AM

Never-Dull, available at most supermarkets and home stores will shine your
torch better than new!!

Good Luck

brad


"Lucifer" wrote in message
...
I just bought a torch and other brass attachments. Brass is tarnished and
dirty. What is the best method/products to use to clean them?
Thanks,
Steve





Don Foreman January 29th 05 07:15 AM

On Wed, 26 Jan 2005 17:18:55 -0330, "Lucifer"
wrote:

Some White, some Green and mostly a dark color all over.
I just tried some Steel wool on it, seem to take most of it off. Also heard
Brasso works wonders as well.

Thanks,
Steve

If steel wool mostly gets it done, you're in good shape. Brasso
left on for a while can do wonders. Other good preparations are
Flitz, Simichrome, Mother's Metal Polish, and a host of others.
Look at autoparts stores. If no luck locally, Flitz and/or
Simichrome are available from www.caswellplating.com and
www.eastwood.com.

Dave Mundt February 2nd 05 12:27 AM

Greetings and salutations....

On Wed, 26 Jan 2005 17:06:12 -0330, "Lucifer"
wrote:

I just bought a torch and other brass attachments. Brass is tarnished and
dirty. What is the best method/products to use to clean them?
Thanks,
Steve


If you have to have them shiny (and they won't last long
that way anyway), I would suggest a buffing wheel and some brass
polish. Don't dip it in any thing, don't soak it, and, don't
sweat the black in the crevices.
After all, this is a tool...not a piece of art.
Regards
Dave Mundt



All times are GMT +1. The time now is 10:45 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter