Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Cleaning anodized aluminum?
Hello,
I am in the process of sprucing up a classic automobile, and need some advice about the anodized aluminum trim. The vehicle is 27 years old and has lived by the sea (in Southern CA) for its entire life. As a result, the anodized aluminum trim has developed a cloudy haze. Can anybody offer any suggestions on cleaning/polishing this type of aluminum back to its original clarity? Is the only real solution to use a mild abrasive (Autosol or similar) metal polish to remove the anodized layer, and then keep it laquered regularly so that corrosion won't set in? What about products like Nevr-Dull? Any advice or direction is appreciated. Thanks. Matt |
#2
|
|||
|
|||
We use fine scotchbrite abrasive material here, but it is usually on new,
industrial anodizing... But it is also black and comes out just fine. Try to get a piece and see how it works. It is sometimes called abrasive nylon. Regards, Joe Agro, Jr. (800) 871-5022 http://www.autodrill.com http://www.multi-spindle-heads.com V8013 wrote in message oups.com... Hello, I am in the process of sprucing up a classic automobile, and need some advice about the anodized aluminum trim. The vehicle is 27 years old and has lived by the sea (in Southern CA) for its entire life. As a result, the anodized aluminum trim has developed a cloudy haze. Can anybody offer any suggestions on cleaning/polishing this type of aluminum back to its original clarity? Is the only real solution to use a mild abrasive (Autosol or similar) metal polish to remove the anodized layer, and then keep it laquered regularly so that corrosion won't set in? What about products like Nevr-Dull? Any advice or direction is appreciated. Thanks. Matt |
#3
|
|||
|
|||
There should be no reason why you cannot have the trim re-anodized. You
might contact www.techplate.com for a professional opinion. A professional auto restoration shop might be able to give a recommendation. Randy wrote in message oups.com... Hello, I am in the process of sprucing up a classic automobile, and need some advice about the anodized aluminum trim. The vehicle is 27 years old and has lived by the sea (in Southern CA) for its entire life. As a result, the anodized aluminum trim has developed a cloudy haze. Can anybody offer any suggestions on cleaning/polishing this type of aluminum back to its original clarity? Is the only real solution to use a mild abrasive (Autosol or similar) metal polish to remove the anodized layer, and then keep it laquered regularly so that corrosion won't set in? What about products like Nevr-Dull? Any advice or direction is appreciated. Thanks. Matt |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Aluminum Oxide Layer and Soot | Metalworking | |||
Soldering aluminum tubing to steel sheet metal | Metalworking | |||
Welding Aluminum (WAS: Welding Magnesium) | Metalworking |