tube / pipe fit over scaffold tube
 

Hello all

I did ask this on another newsgroup a month ago - but not their thing.

I want to find a tube / pipe, readily available, which will slide over
a scaffold tube. For making jigs and fittings from offcuts of
scaffold tube.

Here in the UK (don't know about elsewhere), scaffold tube has 48.3mm
outside diameter.

I did some web-searching and find, for example, that NPS 2 schedule
80, with 60.33mm outside diameter and 5.537mm wall thickness, should
give 49.256mm bore.

Weld on "fins" with holes for bolts, slit between the "fins" and
bolt-up, and the tube will contract and grip a scaffold tube???

Any knowledge on this?

Regards,
Rich S

tube / pipe fit over scaffold tube
 

"Richard Smith" wrote in message
...
Hello all

I did ask this on another newsgroup a month ago - but not their
thing.

I want to find a tube / pipe, readily available, which will slide
over
a scaffold tube. For making jigs and fittings from offcuts of
scaffold tube.

Here in the UK (don't know about elsewhere), scaffold tube has
48.3mm
outside diameter.

I did some web-searching and find, for example, that NPS 2 schedule
80, with 60.33mm outside diameter and 5.537mm wall thickness, should
give 49.256mm bore.

Weld on "fins" with holes for bolts, slit between the "fins" and
bolt-up, and the tube will contract and grip a scaffold tube???

Any knowledge on this?

Regards,
Rich S


Did you try uk.rec.models.engineering, where the British participants
fled went when r.c.m turned Brutish?

tube / pipe fit over scaffold tube
 

"Jim Wilkins" writes:

"Richard Smith" wrote in message
...
Hello all

I did ask this on another newsgroup a month ago - but not their
thing.

I want to find a tube / pipe, readily available, which will slide
over
...
...
Weld on "fins" with holes for bolts, slit between the "fins" and
bolt-up, and the tube will contract and grip a scaffold tube???

Any knowledge on this?

Regards,
Rich S


Did you try uk.rec.models.engineering, where the British participants
fled went when r.c.m turned Brutish?

Thanks for the hint.
Never heard of this group. Will look it up.

Regards,
Rich Smith