Combination 4 Jaw Chuck
I I've never seen a chuck like this, but if I had one setting it up to go on
my lathe would be really close to project number one. This is really cool. Union chuck shown starting at about 0:45 seconds. Don't care much abut the Cushman chuck he is actually planning to work with later in the video. https://youtu.be/nJKW8bgCv5s?t=45 |
Combination 4 Jaw Chuck
"Bob La Londe" wrote in message
... I I've never seen a chuck like this, but if I had one setting it up to go on my lathe would be really close to project number one. This is really cool. Union chuck shown starting at about 0:45 seconds. Don't care much abut the Cushman chuck he is actually planning to work with later in the video. https://youtu.be/nJKW8bgCv5s?t=45 A 6 jaw chuck with two opposite jaws removed will center square stock. |
Combination 4 Jaw Chuck
"Jim Wilkins" wrote in message ... "Bob La Londe" wrote in message ... I I've never seen a chuck like this, but if I had one setting it up to go on my lathe would be really close to project number one. This is really cool. Union chuck shown starting at about 0:45 seconds. Don't care much abut the Cushman chuck he is actually planning to work with later in the video. https://youtu.be/nJKW8bgCv5s?t=45 A 6 jaw chuck with two opposite jaws removed will center square stock. ***** I was just seeing a 4 jaw that can act as a scroll chuck or an independent jaw chuck. Depending on how well it repeats it might be the cat's meow for repeat work on the same size diameter stock. Dial it once, and then use it like a scroll chuck. |
Combination 4 Jaw Chuck
Bob La Londe wrote:
"Jim Wilkins" wrote in message ... "Bob La Londe" wrote in message ... I I've never seen a chuck like this, but if I had one setting it up to go on my lathe would be really close to project number one. This is really cool. Union chuck shown starting at about 0:45 seconds. Don't care much abut the Cushman chuck he is actually planning to work with later in the video. https://youtu.be/nJKW8bgCv5s?t=45 A 6 jaw chuck with two opposite jaws removed will center square stock. ***** I was just seeing a 4 jaw that can act as a scroll chuck or an independent jaw chuck. Depending on how well it repeats it might be the cat's meow for repeat work on the same size diameter stock. Dial it once, and then use it like a scroll chuck. One of the youtube machinists was just showing a chuck like that. Don't recall if it was Keith or Adam. -- Steve W. |
Combination 4 Jaw Chuck
On Sun, 28 Apr 2019 09:25:11 -0700, "Bob La Londe"
wrote: I I've never seen a chuck like this, but if I had one setting it up to go on my lathe would be really close to project number one. This is really cool. Union chuck shown starting at about 0:45 seconds. Don't care much abut the Cushman chuck he is actually planning to work with later in the video. https://youtu.be/nJKW8bgCv5s?t=45 WOW!! Ive heard of them..but never seen one~~ Cool!! Thanks!! __ "Poor widdle Wudy...mentally ill, lies constantly, doesnt know who he is, or even what gender "he" is. No more pathetic creature has ever walked the earth. But...he is locked into a mental hospital for the safety of the public. Which is a very good thing." Asun rauhassa, valmistaudun sotaan. --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus |
All times are GMT +1. The time now is 10:08 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter