Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

LinkBack Thread Tools Search this Thread Display Modes
  #11   Report Post  
Old January 29th 19, 12:45 PM posted to rec.crafts.metalworking
external usenet poster
First recorded activity by DIYBanter: Feb 2018
Posts: 92
Default 9 X 20 ENCO/MSC Lathe question

On Mon, 28 Jan 2019 21:59:31 +0000 (UTC)
Hul Tytus wrote:

Dave - from the looks of the drive mechanism, the motor need be moved up
or down. And again from the looks of it, it's a messy job. If you find an
easier way, let me know.


Agreed. I don't know of any other way either. The motor can be shimmed
(washers) some and slid a little back and forth. You have to watch and
make sure the pulley/shiv stays parallel with the other pulleys it
works with too. Lots of fun getting it all tightened back up square with
it squirming around at the same time...

Leon Fisk
Grand Rapids MI

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
J&L MSC 25% off Karl Townsend Metalworking 3 May 30th 09 04:16 AM
MSC buys J&L AL Metalworking 8 April 4th 06 03:39 AM
Darn MSC AL Metalworking 3 March 20th 06 04:15 PM
MSC Ships me a Toolbox (Tale of Woe) B.B. Metalworking 11 January 10th 06 06:21 PM
Value of McMaster, MSC et al catalogs rashid111 Metalworking 3 July 10th 05 07:08 AM

All times are GMT +1. The time now is 07:30 PM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2004-2019 DIYbanter.
The comments are property of their posters.

About Us

"It's about DIY & home improvement"


Copyright © 2017