Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
EATON Vickers Adjustable Speed Hydraulic Drive on Craigs
Saw this item on the local Craigs List. Thought it was interesting
and a few others might too... === EATON Vickers Adjustable Speed Hydraulic Drive Model TR3-HR18 F 18-20 This is a great unit for controlling the speed of any number of shop tools: lathe, drill press, mill, band saw Power source: Constant speed input supplied by up to 1 hp electric motor at 1150 to 1800 rpm. Input power must be 1/4hp more than required output power. Load: a maximum of 3/4hp & 40 in-lbs of torque is possible. Output speed is fully adjustable from 100rpm to input rpm (1800) by hand-wheel control & is completely reversible with respect to the input rotation. The speed % is displayed by a dial as 0, 25, 50, 75, & 100 in either direction. The unit also has a control shaft for providing quick speed change by use of an attached lever or servo controller. Only +,- 20 degrees of lever motion is needed. Control hand-wheel may be mounted on other side of unit. Description: This is a new unit & original container of hydraulic fluid is provided. Comes with original User's manual & overhaul manual. Input & output shafts are 1/2" diameter & keyed, & are in-line. This unit is built like a tank! Over-all Dimensions: 13"W x 8"D x 6"H (about the size of a fhp electric motor) Mount: 4-bolt (1/4" holes) pattern, 8 1/2" x 3 3/4" Weight: 23# https://grandrapids.craigslist.org/t...357798840.html === -- Leon Fisk Grand Rapids MI/Zone 5b Remove no.spam for email |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
EATON Vickers Adjustable Speed Hydraulic Drive on Craigs
On Thu, 7 Dec 2017 08:20:54 -0400, Leon Fisk
wrote: Saw this item on the local Craigs List. Thought it was interesting and a few others might too... === EATON Vickers Adjustable Speed Hydraulic Drive Model TR3-HR18 F 18-20 This is a great unit for controlling the speed of any number of shop tools: lathe, drill press, mill, band saw Power source: Constant speed input supplied by up to 1 hp electric motor at 1150 to 1800 rpm. Input power must be 1/4hp more than required output power. Load: a maximum of 3/4hp & 40 in-lbs of torque is possible. Output speed is fully adjustable from 100rpm to input rpm (1800) by hand-wheel control & is completely reversible with respect to the input rotation. The speed % is displayed by a dial as 0, 25, 50, 75, & 100 in either direction. The unit also has a control shaft for providing quick speed change by use of an attached lever or servo controller. Only +,- 20 degrees of lever motion is needed. Control hand-wheel may be mounted on other side of unit. Description: This is a new unit & original container of hydraulic fluid is provided. Comes with original User's manual & overhaul manual. Input & output shafts are 1/2" diameter & keyed, & are in-line. This unit is built like a tank! Over-all Dimensions: 13"W x 8"D x 6"H (about the size of a fhp electric motor) Mount: 4-bolt (1/4" holes) pattern, 8 1/2" x 3 3/4" Weight: 23# https://grandrapids.craigslist.org/t...357798840.html === Hell..I think I have one similar to that, still bolted to the shipping board. Mine is vertical rather than horizontal though..if anyone needs it. Gunner --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Adjustable Bed Mattress Find a Sale on Adjustable Bed Mattresses | Home Ownership | |||
Vickers S24 surveyors level | UK diy | |||
EATON COMPRESSORS? | Metalworking | |||
eaton compressors? | Metalworking | |||
Looking for opinions on Eaton compressors | Metalworking |