Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old December 7th 17, 01:20 PM posted to rec.crafts.metalworking
external usenet poster
 
First recorded activity by DIYBanter: Nov 2006
Posts: 1,392
Default EATON Vickers Adjustable Speed Hydraulic Drive on Craigs

Saw this item on the local Craigs List. Thought it was interesting
and a few others might too...

===
EATON Vickers Adjustable Speed Hydraulic Drive
Model TR3-HR18 F 18-20

This is a great unit for controlling the speed of any number of
shop tools: lathe, drill press, mill, band saw

Power source: Constant speed input supplied by up to 1 hp
electric motor at 1150 to 1800 rpm. Input power must be
1/4hp more than required output power.

Load: a maximum of 3/4hp & 40 in-lbs of torque is possible. Output
speed is fully adjustable from 100rpm to input rpm (1800) by
hand-wheel control & is completely reversible with respect
to the input rotation. The speed % is displayed by a dial as
0, 25, 50, 75, & 100 in either direction. The unit also
has a control shaft for providing quick speed change by use of
an attached lever or servo controller. Only +,- 20 degrees of
lever motion is needed. Control hand-wheel may be mounted on
other side of unit.

Description: This is a new unit & original container of
hydraulic fluid is provided. Comes with original User's manual
& overhaul manual. Input & output shafts are 1/2" diameter & keyed,
& are in-line. This unit is built like a tank!

Over-all Dimensions: 13"W x 8"D x 6"H (about the size of a fhp
electric motor) Mount: 4-bolt (1/4" holes) pattern, 8 1/2" x 3 3/4"
Weight: 23#

https://grandrapids.craigslist.org/t...357798840.html
===

--
Leon Fisk
Grand Rapids MI/Zone 5b
Remove no.spam for email


  #2   Report Post  
Old December 7th 17, 06:58 PM posted to rec.crafts.metalworking
external usenet poster
 
First recorded activity by DIYBanter: Feb 2010
Posts: 9,961
Default EATON Vickers Adjustable Speed Hydraulic Drive on Craigs

On Thu, 7 Dec 2017 08:20:54 -0400, Leon Fisk
wrote:

Saw this item on the local Craigs List. Thought it was interesting
and a few others might too...

===
EATON Vickers Adjustable Speed Hydraulic Drive
Model TR3-HR18 F 18-20

This is a great unit for controlling the speed of any number of
shop tools: lathe, drill press, mill, band saw

Power source: Constant speed input supplied by up to 1 hp
electric motor at 1150 to 1800 rpm. Input power must be
1/4hp more than required output power.

Load: a maximum of 3/4hp & 40 in-lbs of torque is possible. Output
speed is fully adjustable from 100rpm to input rpm (1800) by
hand-wheel control & is completely reversible with respect
to the input rotation. The speed % is displayed by a dial as
0, 25, 50, 75, & 100 in either direction. The unit also
has a control shaft for providing quick speed change by use of
an attached lever or servo controller. Only +,- 20 degrees of
lever motion is needed. Control hand-wheel may be mounted on
other side of unit.

Description: This is a new unit & original container of
hydraulic fluid is provided. Comes with original User's manual
& overhaul manual. Input & output shafts are 1/2" diameter & keyed,
& are in-line. This unit is built like a tank!

Over-all Dimensions: 13"W x 8"D x 6"H (about the size of a fhp
electric motor) Mount: 4-bolt (1/4" holes) pattern, 8 1/2" x 3 3/4"
Weight: 23#

https://grandrapids.craigslist.org/t...357798840.html
===


Hell..I think I have one similar to that, still bolted to the shipping
board. Mine is vertical rather than horizontal though..if anyone needs
it.

Gunner

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Adjustable Bed Mattress Find a Sale on Adjustable Bed Mattresses [email protected] Home Ownership 0 February 23rd 08 03:56 AM
Vickers S24 surveyors level Osprey UK diy 2 August 19th 07 12:13 AM
EATON COMPRESSORS? gandd13 Metalworking 0 February 8th 06 05:35 AM
eaton compressors? gandd13 Metalworking 1 February 6th 06 04:01 PM
Looking for opinions on Eaton compressors Bob Engelhardt Metalworking 1 September 28th 05 11:19 PM


All times are GMT +1. The time now is 03:28 AM.

Powered by vBulletin® Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2004-2017 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"

 

Copyright © 2017