DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Metalworking (https://www.diybanter.com/metalworking/)
-   -   EATON Vickers Adjustable Speed Hydraulic Drive on Craigs (https://www.diybanter.com/metalworking/601394-eaton-vickers-adjustable-speed-hydraulic-drive-craigs.html)

Leon Fisk December 7th 17 01:20 PM

EATON Vickers Adjustable Speed Hydraulic Drive on Craigs
 
Saw this item on the local Craigs List. Thought it was interesting
and a few others might too...

===
EATON Vickers Adjustable Speed Hydraulic Drive
Model TR3-HR18 F 18-20

This is a great unit for controlling the speed of any number of
shop tools: lathe, drill press, mill, band saw

Power source: Constant speed input supplied by up to 1 hp
electric motor at 1150 to 1800 rpm. Input power must be
1/4hp more than required output power.

Load: a maximum of 3/4hp & 40 in-lbs of torque is possible. Output
speed is fully adjustable from 100rpm to input rpm (1800) by
hand-wheel control & is completely reversible with respect
to the input rotation. The speed % is displayed by a dial as
0, 25, 50, 75, & 100 in either direction. The unit also
has a control shaft for providing quick speed change by use of
an attached lever or servo controller. Only +,- 20 degrees of
lever motion is needed. Control hand-wheel may be mounted on
other side of unit.

Description: This is a new unit & original container of
hydraulic fluid is provided. Comes with original User's manual
& overhaul manual. Input & output shafts are 1/2" diameter & keyed,
& are in-line. This unit is built like a tank!

Over-all Dimensions: 13"W x 8"D x 6"H (about the size of a fhp
electric motor) Mount: 4-bolt (1/4" holes) pattern, 8 1/2" x 3 3/4"
Weight: 23#

https://grandrapids.craigslist.org/t...357798840.html
===

--
Leon Fisk
Grand Rapids MI/Zone 5b
Remove no.spam for email


Gunner Asch[_6_] December 7th 17 06:58 PM

EATON Vickers Adjustable Speed Hydraulic Drive on Craigs
 
On Thu, 7 Dec 2017 08:20:54 -0400, Leon Fisk
wrote:

Saw this item on the local Craigs List. Thought it was interesting
and a few others might too...

===
EATON Vickers Adjustable Speed Hydraulic Drive
Model TR3-HR18 F 18-20

This is a great unit for controlling the speed of any number of
shop tools: lathe, drill press, mill, band saw

Power source: Constant speed input supplied by up to 1 hp
electric motor at 1150 to 1800 rpm. Input power must be
1/4hp more than required output power.

Load: a maximum of 3/4hp & 40 in-lbs of torque is possible. Output
speed is fully adjustable from 100rpm to input rpm (1800) by
hand-wheel control & is completely reversible with respect
to the input rotation. The speed % is displayed by a dial as
0, 25, 50, 75, & 100 in either direction. The unit also
has a control shaft for providing quick speed change by use of
an attached lever or servo controller. Only +,- 20 degrees of
lever motion is needed. Control hand-wheel may be mounted on
other side of unit.

Description: This is a new unit & original container of
hydraulic fluid is provided. Comes with original User's manual
& overhaul manual. Input & output shafts are 1/2" diameter & keyed,
& are in-line. This unit is built like a tank!

Over-all Dimensions: 13"W x 8"D x 6"H (about the size of a fhp
electric motor) Mount: 4-bolt (1/4" holes) pattern, 8 1/2" x 3 3/4"
Weight: 23#

https://grandrapids.craigslist.org/t...357798840.html
===


Hell..I think I have one similar to that, still bolted to the shipping
board. Mine is vertical rather than horizontal though..if anyone needs
it.

Gunner

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus



All times are GMT +1. The time now is 02:37 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter