Analog Digital Micrometer
 

I've got a little cheap import 0-1" digital analog mic I use all the time
when +/- .001 is good enough. Its actually very repeatable so I guess I
could adjust it. Its repeatable within a couple tenths. When I need to get
closer I check with a nearby size gage block first and adjust for any error.
Anyway, I was wondering if these are available in larger sizes. I've seen
electronic digitals in larger sizes, but I don't recall having seen analog
digitals in larger sizes.

I've got Starrets (circa WWII or older) 0-6" that are pretty good and a set
of Companion (USA) (ok) upto 4", but I'd like to get something a little
faster. I do not care for battery operated mics or calipers. Seems the
battery is always dead when I really need it. I really like the analog
digital. Its also faster for getting close before I even put the mic on the
part.

.... and an assortment of el-cheapos.

Analog Digital Micrometer
 

Bob La Londe wrote:
I've got a little cheap import 0-1" digital analog mic I use all the time
when +/- .001 is good enough. Its actually very repeatable so I guess I
could adjust it. Its repeatable within a couple tenths. When I need to get
closer I check with a nearby size gage block first and adjust for any error.
Anyway, I was wondering if these are available in larger sizes. I've seen
electronic digitals in larger sizes, but I don't recall having seen analog
digitals in larger sizes.

I've got Starrets (circa WWII or older) 0-6" that are pretty good and a set
of Companion (USA) (ok) upto 4", but I'd like to get something a little
faster. I do not care for battery operated mics or calipers. Seems the
battery is always dead when I really need it. I really like the analog
digital. Its also faster for getting close before I even put the mic on the
part.

... and an assortment of el-cheapos.


They are out there. I have a Starret set from 1" up to 10" (was up to 12
but I don't turn anything that big so I shipped them to a friend down
south.

There is a Mitutoyo 193-927 set on fleabay at the moment. from 6-12"
$1000.00

--
Steve W.

Analog Digital Micrometer
 

On 2017-11-06, Bob La Londe wrote:
I've got a little cheap import 0-1" digital analog mic I use all the time
when +/- .001 is good enough. Its actually very repeatable so I guess I
could adjust it. Its repeatable within a couple tenths. When I need to get
closer I check with a nearby size gage block first and adjust for any error.
Anyway, I was wondering if these are available in larger sizes. I've seen
electronic digitals in larger sizes, but I don't recall having seen analog
digitals in larger sizes.

I've got Starrets (circa WWII or older) 0-6" that are pretty good and a set
of Companion (USA) (ok) upto 4", but I'd like to get something a little
faster. I do not care for battery operated mics or calipers. Seems the
battery is always dead when I really need it.

I keep the digital 0-6" calipers with a cell in them full time.
The micrometers, which are used less often, I keep the cell installed
upside down, so it does not drain the cell. When I re-install the cell
for use, I have to re-zero the micrometer, of course, and it is more of
a pain with those over the 0-1" range, since I need to use a standard
rod to do the zeroing -- and if I plan to use it frequently for a while,
I have to go through the extra steps to reset the digit before the
decimal point to match the range of the micrometer. (Otherwise, just
mentally adjust, as one does with the thread and thimble micrometers.)

But digital is easier to read with aging eyes, and they read
down to half a tenth, so I can get more resolution out -- though don't
really trust that "half tenth" digit. :-)

I really like the analog
digital. Its also faster for getting close before I even put the mic on the
part.

Same applies to the electronic digital. And I've seen the
mechanical digital out of sync between the veeder-root counter digital
part and the thimble.

... and an assortment of el-cheapos.

Of course.

Enjoy,
DoN.

--
Remove oil spill source from e-mail
Email: | (KV4PH) Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---

Analog Digital Micrometer
 

On 11/6/2017 12:20 PM, Bob La Londe wrote:
I've got a little cheap import 0-1" digital analog mic I use all the
time when +/- .001 is good enough.Â* Its actually very repeatable so I
guess I could adjust it.Â* Its repeatable within a couple tenths.Â* When I
need to get closer I check with a nearby size gage block first and
adjust for any error. Anyway, I was wondering if these are available in
larger sizes.Â* I've seen electronic digitals in larger sizes, but I
don't recall having seen analog digitals in larger sizes.

I've got Starrets (circa WWII or older) 0-6" that are pretty good and a
set of Companion (USA) (ok) upto 4", but I'd like to get something a
little faster.Â* I do not care for battery operated mics or calipers.
Seems the battery is always dead when I really need it.Â* I really like
the analog digital.Â* Its also faster for getting close before I even put
the mic on the part.

... and an assortment of el-cheapos.


Bite the mental bullet and embrace electronic digitals! Just buy a
bucket of batteries on eBay. Get the best name-brand batteries, the
no-name are crap.

Analog Digital Micrometer
 

"Tom Gardner" wrote in message
...
On 11/6/2017 12:20 PM, Bob La Londe wrote:
I've got a little cheap import 0-1" digital analog mic I
use all the time when +/- .001 is good enough. Its
actually very repeatable so I guess I could adjust it.
Its repeatable within a couple tenths. When I need to get
closer I check with a nearby size gage block first and
adjust for any error. Anyway, I was wondering if these
are available in larger sizes. I've seen electronic
digitals in larger sizes, but I don't recall having seen
analog digitals in larger sizes.

I've got Starrets (circa WWII or older) 0-6" that are
pretty good and a set of Companion (USA) (ok) upto 4",
but I'd like to get something a little faster. I do not
care for battery operated mics or calipers. Seems the
battery is always dead when I really need it. I really
like the analog digital. Its also faster for getting
close before I even put the mic on the part.

... and an assortment of el-cheapos.


Bite the mental bullet and embrace electronic digitals!
Just buy a bucket of batteries on eBay. Get the best
name-brand batteries, the no-name are crap.

My 6" Mitutoyo is not a battery eater! In fact, the battery
lasts a surprisingly long time and is never even turned off.

Analog Digital Micrometer
 

On Wed, 8 Nov 2017 16:31:43 -0500
"Phil Kangas" wrote:

My 6" Mitutoyo is not a battery eater! In fact, the battery
lasts a surprisingly long time and is never even turned off.

I've noticed others saying the same about their more expensive
versions...

There are a couple hacks I've come across, like adding bigger batteries:

https://www.sparkfun.com/tutorials/362

This guy has a 3d printed mod to disconnect the battery:

https://cults3d.com/en/tool/caliper-battery-saver

I've been working on my own mod for the 4 inch HF version. Used a
soldering iron to make a small slot to access the bottom side of the
battery compartment. Probably be using a small strip of plastic from an
old yogurt carton to slip underneath the battery. Currently the battery
is too snug to get underneath. Looks like I'll have to make a new
battery compartment cover to get it too work...

--
Leon Fisk
Grand Rapids MI/Zone 5b
Remove no.spam for email