Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Welding advice needed
1948 Pontiac seat frame.
Break is precisely at a factory weld. Can only get to about 50-60% of the tubing. Have acetylene, MIG and TIG. Lousy at TIG. Best way to reinforce joint? 1/4"x1/8" splines? Form a partial sleeve (wrap while sleeve red hot) around area? Slide solid steel bar into joint an weld the junction? Thanks! All advice appreciated. Ivan Végváry a href='https://postimg.org/image/f9nvkm5wj/' target='_blank'img src='https://s29.postimg.org/f9nvkm5wj/20170823_135125_001.jpg' border='0' alt='20170823_135125_001'//a |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Welding Pigs (Watch Tig Welding/Brazing with Silicon Bronze First) | Metalworking | |||
Advice needed: Oil filter needed for oil furnace? | Home Repair | |||
motorcycle gas tank welding -advice needed | Metalworking | |||
Welding Aluminum (WAS: Welding Magnesium) | Metalworking | |||
Welding holes in a chaincase - advice wanted | UK diy |