Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Ford 9N ignition question.
Years ago my neighbor and I bought a 9N tractor together. we used the
tractor for many years and then for various reasons we parked it for several years. Deciding to use it again I wasn't able to get any spark, even though it worked fine when we parked it. After cleaning the points I was able to confirm that the points were properly adjusted and making contact. Opening and closing the points by hand resulted in an erratic and weak spark. Tracing the really simple electrics I found that the power from the battery goes through a ballast resistor. Unlike cars and other vehicles with ballast resistors that I'm familiar with the ballast resistor is bypassed during starting. But the old Ford 9N tractor doesn't do this. I ended up connecting the coil directly to the battery and this resulted in a pretty good spark. Good enough that the tractor started right up. So why the ballast resistor? Why would the current need to be limited for regular operation if the ballast resistor isn't bypassed during starting? Anyway, I am not going to run the tractor with the ballast resistor out of the circuit because It is supposed to be there. And before it was parked for several years it worked just fine. I think the reason for the poor spark must be corroded connections somewhere in the ignition circuit. But I'm still wondering why they designed the ignition circuit with a ballast resistor. Anybody know? Thanks, Eric |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Ford 9N ignition question.
|
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Ford 9N ignition question.
wrote in message
... Years ago my neighbor and I bought a 9N tractor together. we used the tractor for many years and then for various reasons we parked it for several years. Deciding to use it again I wasn't able to get any spark, even though it worked fine when we parked it. After cleaning the points I was able to confirm that the points were properly adjusted and making contact. Opening and closing the points by hand resulted in an erratic and weak spark. Tracing the really simple electrics I found that the power from the battery goes through a ballast resistor. Unlike cars and other vehicles with ballast resistors that I'm familiar with the ballast resistor is bypassed during starting. But the old Ford 9N tractor doesn't do this. I ended up connecting the coil directly to the battery and this resulted in a pretty good spark. Good enough that the tractor started right up. So why the ballast resistor? Why would the current need to be limited for regular operation if the ballast resistor isn't bypassed during starting? Anyway, I am not going to run the tractor with the ballast resistor out of the circuit because It is supposed to be there. And before it was parked for several years it worked just fine. I think the reason for the poor spark must be corroded connections somewhere in the ignition circuit. But I'm still wondering why they designed the ignition circuit with a ballast resistor. Anybody know? Thanks, Eric http://www.myfordtractors.com/index.shtml http://www.learnabout-electronics.or.../dc_ccts45.php The resistor AND a coil designed to generate the spark with a lower input voltage decreases the time for the magnetic field to build up when the points close, without overheating the coil from its internal resistive loss. |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
Ford 9N ignition question.
On Monday, April 24, 2017 at 4:34:08 PM UTC-4, But I'm still wondering why they designed the
ignition circuit with a ballast resistor. Anybody know? Thanks, Eric The total resistance is the wiring, the ballast resister , and the resistance of the coil primary. If all the resistance was zero, the current would initially be controlled by the inductance of the coil, but would be high and burn the points. Some coil essentially have a built in ballast resistor and do not need or use an external ballast resistor. When you are starting the engine the voltage is lower. So if you short out the ballast resistor it is closer to how it is when the engine is running. So even with the lower voltage when starting , you get a good spark. Dan |
#5
Posted to rec.crafts.metalworking
|
|||
|
|||
Ford 9N ignition question.
On Monday, April 24, 2017 at 4:34:08 PM UTC-4, wrote:
I think the reason for the poor spark must be corroded connections somewhere in the ignition circuit. But I'm still wondering why they designed the ignition circuit with a ballast resistor. Anybody know? Thanks, Eric Forgot to say that the weak spark might be caused by a bad condenser. THe condenser helps keep the spark from occurring across the points instead of at the spark plug. Dan |
#6
Posted to rec.crafts.metalworking
|
|||
|
|||
Ford 9N ignition question.
|
#7
Posted to rec.crafts.metalworking
|
|||
|
|||
Ford 9N ignition question.
|
#8
Posted to rec.crafts.metalworking
|
|||
|
|||
Ford 9N ignition question.
On Mon, 24 Apr 2017 16:20:55 -0500, dpb wrote:
On 04/24/2017 3:35 PM, wrote: ... ...But I'm still wondering why they designed the ignition circuit with a ballast resistor. Anybody know? http://www.yesterdaystractors.com/cgi-bin/viewit.cgi?bd=nboard&th=902413 Thanks for the link. It explains it perfectly. Eric |
#9
Posted to rec.crafts.metalworking
|
|||
|
|||
Ford 9N ignition question.
On Mon, 24 Apr 2017 16:40:39 -0700 (PDT), "
wrote: On Monday, April 24, 2017 at 4:34:08 PM UTC-4, But I'm still wondering why they designed the ignition circuit with a ballast resistor. Anybody know? Thanks, Eric The total resistance is the wiring, the ballast resister , and the resistance of the coil primary. If all the resistance was zero, the current would initially be controlled by the inductance of the coil, but would be high and burn the points. Some coil essentially have a built in ballast resistor and do not need or use an external ballast resistor. When you are starting the engine the voltage is lower. So if you short out the ballast resistor it is closer to how it is when the engine is running. So even with the lower voltage when starting , you get a good spark. Dan I know about the shorting Dan, read my post that you replied to a little more carefully. I wanted to know why the ballast is there when it is never bypassed. dbp sent me a link and now I understand. Eric |
#11
Posted to rec.crafts.metalworking
|
|||
|
|||
Ford 9N ignition question.
wrote:
On Monday, April 24, 2017 at 4:34:08 PM UTC-4, wrote: I think the reason for the poor spark must be corroded connections somewhere in the ignition circuit. But I'm still wondering why they designed the ignition circuit with a ballast resistor. Anybody know? Thanks, Eric Forgot to say that the weak spark might be caused by a bad condenser. THe condenser helps keep the spark from occurring across the points instead of at the spark plug I've got no familiarity with what a condenser is (outside of HVAC) in car circuitry. But thanks for saying what it does. |
#12
Posted to rec.crafts.metalworking
|
|||
|
|||
Ford 9N ignition question.
On Mon, 24 Apr 2017 18:06:07 -0400, "Jim Wilkins"
wrote: wrote in message .. . Years ago my neighbor and I bought a 9N tractor together. we used the tractor for many years and then for various reasons we parked it for several years. Deciding to use it again I wasn't able to get any spark, even though it worked fine when we parked it. After cleaning the points I was able to confirm that the points were properly adjusted and making contact. Opening and closing the points by hand resulted in an erratic and weak spark. Tracing the really simple electrics I found that the power from the battery goes through a ballast resistor. Unlike cars and other vehicles with ballast resistors that I'm familiar with the ballast resistor is bypassed during starting. But the old Ford 9N tractor doesn't do this. I ended up connecting the coil directly to the battery and this resulted in a pretty good spark. Good enough that the tractor started right up. So why the ballast resistor? Why would the current need to be limited for regular operation if the ballast resistor isn't bypassed during starting? Anyway, I am not going to run the tractor with the ballast resistor out of the circuit because It is supposed to be there. And before it was parked for several years it worked just fine. I think the reason for the poor spark must be corroded connections somewhere in the ignition circuit. But I'm still wondering why they designed the ignition circuit with a ballast resistor. Anybody know? Thanks, Eric http://www.myfordtractors.com/index.shtml http://www.learnabout-electronics.or.../dc_ccts45.php The resistor AND a coil designed to generate the spark with a lower input voltage decreases the time for the magnetic field to build up when the points close, without overheating the coil from its internal resistive loss. It also slows the burn-up rate of the contact points. I remember very well when a tuneup lasted only 6,000 miles. I made a living from it. Hey IGGY, got any of those tractor manuals on your site? -- Well, the trouble with our liberal friends is not that they are ignorant, but that they know so much that isn’t so. --Ronald Reagan |
#13
Posted to rec.crafts.metalworking
|
|||
|
|||
Ford 9N ignition question.
|
#14
Posted to rec.crafts.metalworking
|
|||
|
|||
Ford 9N ignition question.
On Tuesday, April 25, 2017 at 7:25:21 PM UTC-4, Clare wrote:
On Tue, 25 Apr 2017 15:19:17 -0700 (PDT), wrote: wrote: On Monday, April 24, 2017 at 4:34:08 PM UTC-4, wrote: I think the reason for the poor spark must be corroded connections somewhere in the ignition circuit. But I'm still wondering why they designed the ignition circuit with a ballast resistor. Anybody know? Thanks, Eric Forgot to say that the weak spark might be caused by a bad condenser. THe condenser helps keep the spark from occurring across the points instead of at the spark plug I've got no familiarity with what a condenser is (outside of HVAC) in car circuitry. But thanks for saying what it does. It is actually a Capacitor. A rose by any other name - - - Right. "Condenser" is the old name for it. It disappeared in radio decades before automotive types abandoned the term. -- Ed Huntress |
#15
Posted to rec.crafts.metalworking
|
|||
|
|||
Ford 9N ignition question.
wrote in message ... wrote: On Monday, April 24, 2017 at 4:34:08 PM UTC-4, wrote: I think the reason for the poor spark must be corroded connections somewhere in the ignition circuit. But I'm still wondering why they designed the ignition circuit with a ballast resistor. Anybody know? Thanks, Eric Forgot to say that the weak spark might be caused by a bad condenser. THe condenser helps keep the spark from occurring across the points instead of at the spark plug I've got no familiarity with what a condenser is (outside of HVAC) in car circuitry. But thanks for saying what it does. ================ https://commons.wikimedia.org/wiki/F...nimation_3.gif The green lines are energy stored as magnetic field in the coil, the black ones are energy stored as electric charge in the capacitor. The oscillating transfer of energy between them is similar to a swinging pendulum that swaps its energy between speed in the middle and height at the ends. |
#16
Posted to rec.crafts.metalworking
|
|||
|
|||
Ford 9N ignition question.
|
#17
Posted to rec.crafts.metalworking
|
|||
|
|||
Ford 9N ignition question.
On Wed, 26 Apr 2017 09:35:33 -0400, Bob Engelhardt
wrote: On 4/25/2017 11:56 AM, wrote: ... I suspected the condenser but the points aren't making big sparks like they do when the condenser is bad. If the "condenser" were open, you'd get big sparks. But if the condenser is bad shorted, or nearly so, you'd get a weak spark at the plug and no spark at the points. Last night I cleaned some of the connections in the ignition circuit. I started the tractor using the "hot wired" connection first just to make sure the tractor would start. I let it run for less than 10 seconds and shut it off. After removing the hot wire that went directly from the battery to the coil I tried starting the tractor the normal way and it lit right up. It looks like plain old corrosiion problems because the tractor sat for so long without being started. The original wiring harness has been repaired a wire at a time by previous owners and is kind of a kluge. Even though it all works the ammeter has always been bypassed. I don't even know if it works. So I'm gonna order today a new wiring harness and ammeter because the ammeter looks like it has corroded inside. It's amazing how much stuff is still available brand new for the old Ford 9N, 2N, and 8N tractors. The only part I haven't been able to find new is the tube which carries the spark plug wires. I wonder why since everything else seems to be available. Even new engines. About 18 years ago the hydraulic piston assembly under the seat on this tractor needed to be replaced. I ordered one from a catalog and was surprised at first that it was made in Taiwan. Thinking about it made me realize that it made perfec sense as these tractors and the nearly identical Ferguson tractors were sold world wide. Eric |
#18
Posted to rec.crafts.metalworking
|
|||
|
|||
Ford 9N ignition question.
On Wed, 26 Apr 2017 08:49:21 -0700, wrote:
On Wed, 26 Apr 2017 09:35:33 -0400, Bob Engelhardt wrote: On 4/25/2017 11:56 AM, wrote: ... I suspected the condenser but the points aren't making big sparks like they do when the condenser is bad. If the "condenser" were open, you'd get big sparks. But if the condenser is bad shorted, or nearly so, you'd get a weak spark at the plug and no spark at the points. Last night I cleaned some of the connections in the ignition circuit. I started the tractor using the "hot wired" connection first just to make sure the tractor would start. I let it run for less than 10 seconds and shut it off. After removing the hot wire that went directly from the battery to the coil I tried starting the tractor the normal way and it lit right up. It looks like plain old corrosiion problems because the tractor sat for so long without being started. The original wiring harness has been repaired a wire at a time by previous owners and is kind of a kluge. Even though it all works the ammeter has always been bypassed. I don't even know if it works. So I'm gonna order today a new wiring harness and ammeter because the ammeter looks like it has corroded inside. It's amazing how much stuff is still available brand new for the old Ford 9N, 2N, and 8N tractors. The only part I haven't been able to find new is the tube which carries the spark plug wires. I wonder why since everything else seems to be available. Even new engines. About 18 years ago the hydraulic piston assembly under the seat on this tractor needed to be replaced. I ordered one from a catalog and was surprised at first that it was made in Taiwan. Thinking about it made me realize that it made perfec sense as these tractors and the nearly identical Ferguson tractors were sold world wide. Eric And are still widely in use, world wide. --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus |
#19
Posted to rec.crafts.metalworking
|
|||
|
|||
Ford 9N ignition question.
On Tuesday, April 25, 2017 at 7:25:21 PM UTC-4, Clare wrote:
On Tue, 25 Apr 2017 15:19:17 -0700 (PDT), wrote: wrote: On Monday, April 24, 2017 at 4:34:08 PM UTC-4, wrote: I think the reason for the poor spark must be corroded connections somewhere in the ignition circuit. But I'm still wondering why they designed the ignition circuit with a ballast resistor. Anybody know? Thanks, Eric Forgot to say that the weak spark might be caused by a bad condenser. THe condenser helps keep the spark from occurring across the points instead of at the spark plug I've got no familiarity with what a condenser is (outside of HVAC) in car circuitry. But thanks for saying what it does. It is actually a Capacitor. A rose by any other name - - - Its just that a condenser also refers to the hot, liquid, high pressure 'low side" of a vehicle's air conditioning system. Its not always a good idea to have two different auto parts with the same name. |
#20
Posted to rec.crafts.metalworking
|
|||
|
|||
Ford 9N ignition question.
On Thursday, April 27, 2017 at 6:40:35 PM UTC-4, wrote:
On Tuesday, April 25, 2017 at 7:25:21 PM UTC-4, Clare wrote: On Tue, 25 Apr 2017 15:19:17 -0700 (PDT), wrote: wrote: On Monday, April 24, 2017 at 4:34:08 PM UTC-4, wrote: I think the reason for the poor spark must be corroded connections somewhere in the ignition circuit. But I'm still wondering why they designed the ignition circuit with a ballast resistor. Anybody know? Thanks, Eric Forgot to say that the weak spark might be caused by a bad condenser. THe condenser helps keep the spark from occurring across the points instead of at the spark plug I've got no familiarity with what a condenser is (outside of HVAC) in car circuitry. But thanks for saying what it does. It is actually a Capacitor. A rose by any other name - - - Its just that a condenser also refers to the hot, liquid, high pressure 'low side" of a vehicle's air conditioning system. Its not always a good idea to have two different auto parts with the same name. They've got to do something about "wheel," then. g I haven't heard "condenser" for "capacitor" for a long time. I'll have to look at my really old engine books to see when it last showed up. -- Ed Huntress |
#21
Posted to rec.crafts.metalworking
|
|||
|
|||
Ford 9N ignition question.
|
#22
Posted to rec.crafts.metalworking
|
|||
|
|||
Ford 9N ignition question.
wrote in message
... On Thu, 27 Apr 2017 16:10:06 -0700 (PDT), wrote: On Thursday, April 27, 2017 at 6:40:35 PM UTC-4, wrote: On Tuesday, April 25, 2017 at 7:25:21 PM UTC-4, Clare wrote: On Tue, 25 Apr 2017 15:19:17 -0700 (PDT), wrote: wrote: On Monday, April 24, 2017 at 4:34:08 PM UTC-4, wrote: I think the reason for the poor spark must be corroded connections somewhere in the ignition circuit. But I'm still wondering why they designed the ignition circuit with a ballast resistor. Anybody know? Thanks, Eric Forgot to say that the weak spark might be caused by a bad condenser. THe condenser helps keep the spark from occurring across the points instead of at the spark plug I've got no familiarity with what a condenser is (outside of HVAC) in car circuitry. But thanks for saying what it does. It is actually a Capacitor. A rose by any other name - - - Its just that a condenser also refers to the hot, liquid, high pressure 'low side" of a vehicle's air conditioning system. Its not always a good idea to have two different auto parts with the same name. They've got to do something about "wheel," then. g I haven't heard "condenser" for "capacitor" for a long time. I'll have to look at my really old engine books to see when it last showed up. Then there's two different fenders, and two different hoods, dpending where you are in the world. https://electronics.stackexchange.co...ays-of-electro "Not that anyone cares, but "condenser" seems to have faded from use from the mid 1930s through about 1950. Dubilier was using capacitor by 1940 but Allied catalogs didn't switch to capacitor until around 1950." |
#23
Posted to rec.crafts.metalworking
|
|||
|
|||
Ford 9N ignition question.
On Thu, 27 Apr 2017 22:51:23 -0400, "Jim Wilkins"
wrote: wrote in message .. . On Thu, 27 Apr 2017 16:10:06 -0700 (PDT), wrote: On Thursday, April 27, 2017 at 6:40:35 PM UTC-4, wrote: On Tuesday, April 25, 2017 at 7:25:21 PM UTC-4, Clare wrote: On Tue, 25 Apr 2017 15:19:17 -0700 (PDT), wrote: wrote: On Monday, April 24, 2017 at 4:34:08 PM UTC-4, wrote: I think the reason for the poor spark must be corroded connections somewhere in the ignition circuit. But I'm still wondering why they designed the ignition circuit with a ballast resistor. Anybody know? Thanks, Eric Forgot to say that the weak spark might be caused by a bad condenser. THe condenser helps keep the spark from occurring across the points instead of at the spark plug I've got no familiarity with what a condenser is (outside of HVAC) in car circuitry. But thanks for saying what it does. It is actually a Capacitor. A rose by any other name - - - Its just that a condenser also refers to the hot, liquid, high pressure 'low side" of a vehicle's air conditioning system. Its not always a good idea to have two different auto parts with the same name. They've got to do something about "wheel," then. g I haven't heard "condenser" for "capacitor" for a long time. I'll have to look at my really old engine books to see when it last showed up. Then there's two different fenders, and two different hoods, dpending where you are in the world. https://electronics.stackexchange.co...ays-of-electro "Not that anyone cares, but "condenser" seems to have faded from use from the mid 1930s through about 1950. Dubilier was using capacitor by 1940 but Allied catalogs didn't switch to capacitor until around 1950." NAPA / Echlin was still using Condenser in 1998 (their catalog U138) |
#24
Posted to rec.crafts.metalworking
|
|||
|
|||
Ford 9N ignition question.
On Thursday, April 27, 2017 at 10:51:29 PM UTC-4, Jim Wilkins wrote:
wrote in message ... On Thu, 27 Apr 2017 16:10:06 -0700 (PDT), wrote: On Thursday, April 27, 2017 at 6:40:35 PM UTC-4, wrote: On Tuesday, April 25, 2017 at 7:25:21 PM UTC-4, Clare wrote: On Tue, 25 Apr 2017 15:19:17 -0700 (PDT), wrote: wrote: On Monday, April 24, 2017 at 4:34:08 PM UTC-4, wrote: I think the reason for the poor spark must be corroded connections somewhere in the ignition circuit. But I'm still wondering why they designed the ignition circuit with a ballast resistor. Anybody know? Thanks, Eric Forgot to say that the weak spark might be caused by a bad condenser. THe condenser helps keep the spark from occurring across the points instead of at the spark plug I've got no familiarity with what a condenser is (outside of HVAC) in car circuitry. But thanks for saying what it does. It is actually a Capacitor. A rose by any other name - - - Its just that a condenser also refers to the hot, liquid, high pressure 'low side" of a vehicle's air conditioning system. Its not always a good idea to have two different auto parts with the same name. They've got to do something about "wheel," then. g I haven't heard "condenser" for "capacitor" for a long time. I'll have to look at my really old engine books to see when it last showed up. Then there's two different fenders, and two different hoods, dpending where you are in the world. https://electronics.stackexchange.co...ays-of-electro "Not that anyone cares, but "condenser" seems to have faded from use from the mid 1930s through about 1950. Dubilier was using capacitor by 1940 but Allied catalogs didn't switch to capacitor until around 1950." It hung on later in reference to car ignotion, though. I remember seeing it in some tune-up manuals from the early '60s. I really don't want to go into that corner of the attic but maybe I'll get to it. g -- Ed Hunress |
#25
Posted to rec.crafts.metalworking
|
|||
|
|||
Ford 9N ignition question.
wrote in message
... On Thursday, April 27, 2017 at 10:51:29 PM UTC-4, Jim Wilkins wrote: wrote in message ... On Thu, 27 Apr 2017 16:10:06 -0700 (PDT), wrote: On Thursday, April 27, 2017 at 6:40:35 PM UTC-4, wrote: On Tuesday, April 25, 2017 at 7:25:21 PM UTC-4, Clare wrote: On Tue, 25 Apr 2017 15:19:17 -0700 (PDT), wrote: wrote: On Monday, April 24, 2017 at 4:34:08 PM UTC-4, wrote: I think the reason for the poor spark must be corroded connections somewhere in the ignition circuit. But I'm still wondering why they designed the ignition circuit with a ballast resistor. Anybody know? Thanks, Eric Forgot to say that the weak spark might be caused by a bad condenser. THe condenser helps keep the spark from occurring across the points instead of at the spark plug I've got no familiarity with what a condenser is (outside of HVAC) in car circuitry. But thanks for saying what it does. It is actually a Capacitor. A rose by any other name - - - Its just that a condenser also refers to the hot, liquid, high pressure 'low side" of a vehicle's air conditioning system. Its not always a good idea to have two different auto parts with the same name. They've got to do something about "wheel," then. g I haven't heard "condenser" for "capacitor" for a long time. I'll have to look at my really old engine books to see when it last showed up. Then there's two different fenders, and two different hoods, dpending where you are in the world. https://electronics.stackexchange.co...ays-of-electro "Not that anyone cares, but "condenser" seems to have faded from use from the mid 1930s through about 1950. Dubilier was using capacitor by 1940 but Allied catalogs didn't switch to capacitor until around 1950." It hung on later in reference to car ignotion, though. I remember seeing it in some tune-up manuals from the early '60s. I really don't want to go into that corner of the attic but maybe I'll get to it. g -- Ed Hunress Condensor is the old Latin name for them. |
#26
Posted to rec.crafts.metalworking
|
|||
|
|||
Ford 9N ignition question.
On Thu, 27 Apr 2017 22:27:18 -0400, wrote:
On Thu, 27 Apr 2017 16:10:06 -0700 (PDT), wrote: On Thursday, April 27, 2017 at 6:40:35 PM UTC-4, wrote: On Tuesday, April 25, 2017 at 7:25:21 PM UTC-4, Clare wrote: On Tue, 25 Apr 2017 15:19:17 -0700 (PDT), wrote: wrote: On Monday, April 24, 2017 at 4:34:08 PM UTC-4, wrote: I think the reason for the poor spark must be corroded connections somewhere in the ignition circuit. But I'm still wondering why they designed the ignition circuit with a ballast resistor. Anybody know? Thanks, Eric Forgot to say that the weak spark might be caused by a bad condenser. THe condenser helps keep the spark from occurring across the points instead of at the spark plug I've got no familiarity with what a condenser is (outside of HVAC) in car circuitry. But thanks for saying what it does. It is actually a Capacitor. A rose by any other name - - - Its just that a condenser also refers to the hot, liquid, high pressure 'low side" of a vehicle's air conditioning system. Its not always a good idea to have two different auto parts with the same name. They've got to do something about "wheel," then. g I haven't heard "condenser" for "capacitor" for a long time. I'll have to look at my really old engine books to see when it last showed up. "Points and condenser" disappeared with the electronic ignitions and fuel injection, THANK CROM! Most had gone away by '85, when I got out of the biz. Then there's two different fenders, and two different hoods, dpending where you are in the world. Are you gushing over guitars and bashing bonnets, boy? -- Well, the trouble with our liberal friends is not that they are ignorant, but that they know so much that isn’t so. --Ronald Reagan |
#27
Posted to rec.crafts.metalworking
|
|||
|
|||
Ford 9N ignition question.
|
#28
Posted to rec.crafts.metalworking
|
|||
|
|||
Ford 9N ignition question.
On Friday, April 28, 2017 at 11:16:11 AM UTC-4, Bob Engelhardt wrote:
On 4/27/2017 11:01 PM, wrote: It hung on later in reference to car ignotion, though. I remember seeing it in some tune-up manuals from the early '60s. ... My '78 Fiat manual used "condenser" I wonder in that case if you were seeing an accepted use, or a translation from Italian that happened to use an old technical word from English? For example, I once had to read an Italian engineering paper on the subject of electrical discharge machining. The first sentence of the paper described EDM as a "freaky appelation." d8-) -- Ed Huntress |
#29
Posted to rec.crafts.metalworking
|
|||
|
|||
Ford 9N ignition question.
On Thu, 27 Apr 2017 23:00:38 -0400, wrote:
On Thu, 27 Apr 2017 22:51:23 -0400, "Jim Wilkins" wrote: wrote in message . .. On Thu, 27 Apr 2017 16:10:06 -0700 (PDT), wrote: On Thursday, April 27, 2017 at 6:40:35 PM UTC-4, wrote: On Tuesday, April 25, 2017 at 7:25:21 PM UTC-4, Clare wrote: On Tue, 25 Apr 2017 15:19:17 -0700 (PDT), wrote: wrote: On Monday, April 24, 2017 at 4:34:08 PM UTC-4, wrote: I think the reason for the poor spark must be corroded connections somewhere in the ignition circuit. But I'm still wondering why they designed the ignition circuit with a ballast resistor. Anybody know? Thanks, Eric Forgot to say that the weak spark might be caused by a bad condenser. THe condenser helps keep the spark from occurring across the points instead of at the spark plug I've got no familiarity with what a condenser is (outside of HVAC) in car circuitry. But thanks for saying what it does. It is actually a Capacitor. A rose by any other name - - - Its just that a condenser also refers to the hot, liquid, high pressure 'low side" of a vehicle's air conditioning system. Its not always a good idea to have two different auto parts with the same name. They've got to do something about "wheel," then. g I haven't heard "condenser" for "capacitor" for a long time. I'll have to look at my really old engine books to see when it last showed up. Then there's two different fenders, and two different hoods, dpending where you are in the world. https://electronics.stackexchange.co...ays-of-electro "Not that anyone cares, but "condenser" seems to have faded from use from the mid 1930s through about 1950. Dubilier was using capacitor by 1940 but Allied catalogs didn't switch to capacitor until around 1950." NAPA / Echlin was still using Condenser in 1998 (their catalog U138) I know the condenser is a capacitor. But when you say "I replaced the points and capacitor" people look at you strange. So when I am doing a tune up on a points ignition vehicle I replace the condenser. When anything else I say capacitor. Eric |
#30
Posted to rec.crafts.metalworking
|
|||
|
|||
Ford 9N ignition question.
On Thu, 27 Apr 2017 22:51:23 -0400, "Jim Wilkins"
wrote: wrote in message .. . On Thu, 27 Apr 2017 16:10:06 -0700 (PDT), wrote: On Thursday, April 27, 2017 at 6:40:35 PM UTC-4, wrote: On Tuesday, April 25, 2017 at 7:25:21 PM UTC-4, Clare wrote: On Tue, 25 Apr 2017 15:19:17 -0700 (PDT), wrote: wrote: On Monday, April 24, 2017 at 4:34:08 PM UTC-4, wrote: I think the reason for the poor spark must be corroded connections somewhere in the ignition circuit. But I'm still wondering why they designed the ignition circuit with a ballast resistor. Anybody know? Thanks, Eric Forgot to say that the weak spark might be caused by a bad condenser. THe condenser helps keep the spark from occurring across the points instead of at the spark plug I've got no familiarity with what a condenser is (outside of HVAC) in car circuitry. But thanks for saying what it does. It is actually a Capacitor. A rose by any other name - - - Its just that a condenser also refers to the hot, liquid, high pressure 'low side" of a vehicle's air conditioning system. Its not always a good idea to have two different auto parts with the same name. They've got to do something about "wheel," then. g I haven't heard "condenser" for "capacitor" for a long time. I'll have to look at my really old engine books to see when it last showed up. Then there's two different fenders, and two different hoods, dpending where you are in the world. https://electronics.stackexchange.co...ays-of-electro "Not that anyone cares, but "condenser" seems to have faded from use from the mid 1930s through about 1950. Dubilier was using capacitor by 1940 but Allied catalogs didn't switch to capacitor until around 1950." I recall my ham radio mentor, and others using the term back in the late 1960s. And of course..car mechanics even today. --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus |
#31
Posted to rec.crafts.metalworking
|
|||
|
|||
Ford 9N ignition question.
|
#32
Posted to rec.crafts.metalworking
|
|||
|
|||
Ford 9N ignition question.
On Sat, 06 May 2017 13:39:33 -0500, dpb wrote:
On 04/27/2017 6:10 PM, wrote: ... I haven't heard "condenser" for "capacitor" for a long time. I'll have to look at my really old engine books to see when it last showed up. Any vehicle w/ a distributor/points system...auto parts lookup is still the common name (at least in US; don't know for certain what the Brits used). Not sure when production in US finally would have ceased, trucks were exempt from some of the more onerous emissions reqm'ts for a while after automobiles so therein is probably where the last would have been. Off-road equipment, of course, lasted for quite a lot longer. Condensers are still quite commonly found on vehicles on the roads in this side of the US. --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus |
#33
Posted to rec.crafts.metalworking
|
|||
|
|||
Ford 9N ignition question.
Gunner Asch writes:
On Sat, 06 May 2017 13:39:33 -0500, dpb wrote: On 04/27/2017 6:10 PM, wrote: ... I haven't heard "condenser" for "capacitor" for a long time. I'll have to look at my really old engine books to see when it last showed up. Any vehicle w/ a distributor/points system...auto parts lookup is still the common name (at least in US; don't know for certain what the Brits used). Not sure when production in US finally would have ceased, trucks were exempt from some of the more onerous emissions reqm'ts for a while after automobiles so therein is probably where the last would have been. Off-road equipment, of course, lasted for quite a lot longer. Condensers are still quite commonly found on vehicles on the roads in this side of the US. ........ In front of the radiator, full of refrigerant. -- A host is a host from coast to & no one will talk to a host that's close.......................... Unless the host (that isn't close).........................pob 1433 is busy, hung or dead....................................20915-1433 |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
(OT) Ignition coil/condenser question. | Metalworking | |||
Ignition coil question | Metalworking | |||
Ford Ranger question | Metalworking | |||
Four Tips When Choosing New Ford Truck Seat Covers.(ford truckaccessory) | Home Repair | |||
Briggs & Stratton ignition question | Metalworking |