potenionmeter replace from ??????
Do you have a contact Web site?
-- for full context, visit http://www.polytechforum.com/metalwo...om-634104-.htm |
potenionmeter replace from ??????
On 2017-01-09, chuck wrote:
Do you have a contact Web site? What kind of potentiometer? There are lots, with the most common having 270 degree rotation. Some of those are linear taper, and some are audio taper, depending on the application. Some of them include a power switch at the lowest volume position (down and then off). Then there are 10-turn pots -- all of those that I have seen are linear. I've seen a very few 5-turn pots. Then there are the various styles of trimpots -- to mount on PC boards, or long rectangular ones with multi-turn leadscrews moving the wiper. And this is including the step type ones like those made by Daven, with each step representing a specific number of DeciBels (db). And -- multi-switch ones for setting precise attenuation in decimal steps. So -- until we know what kind of Potentiometer, there is no chance to come up with a suggested web site. And -- it almost looks like someone is thinking that a usenet newsgroup is a company. :-) Who is the "you" this is addressed to? And no -- I do not sell potentiometers, and only occasionally buy new ones. :-) There is always: http://www.ebay.com and then search through there for something like what you think you want. Good luck, DoN. -- Remove oil spill source from e-mail Email: | (KV4PH) Voice (all times): (703) 938-4564 (too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html --- Black Holes are where God is dividing by zero --- |
potenionmeter replace from ??????
Potentiometer? Potentionmeter? PotentioNmeter (with an 'n' before the 'm'?
|
potenionmeter replace from ??????
Digikey.com
On 1/9/2017 6:18 AM, chuck wrote: Do you have a contact Web site? |
potenionmeter replace from ??????
chuck wrote:
Do you have a contact Web site? http://www.potentiometers.com/ -- Never **** off an Engineer! They don't get mad. They don't get even. They go for over unity! ;-) |
All times are GMT +1. The time now is 03:18 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter