DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Metalworking (https://www.diybanter.com/metalworking/)
-   -   Gas tank rust (https://www.diybanter.com/metalworking/582645-gas-tank-rust.html)

[email protected] December 8th 16 11:11 PM

Gas tank rust
 
On Tue, 21 May 2002 18:25:22 -0500, "Ronald Thompson"
wrote:
I just repaired an old gas tank on a ford van.....

So far, so good. Does anyone know what I can use to dissipate
the remaining water? I thought of rubbing alcohol, but IIRC it
has a high water content to start with. Any ideas?

Around here (Southern Ontario) the srug stores sell 99% Isopropyl
alcohol as "Rubbing Alcohol," which should do it nicely. The the
70% alcohol / 30% water mix is called "Rubbing Alcohol Compound."


I'm definitely not a chemist, but the presence of alcohol usually accompanies corrosion.

"The alcohol attracts water, leading to increased corrosion in metal gas tanks". (its a quote commonly found on the internet)

John B.[_6_] December 8th 16 11:55 PM

Gas tank rust
 
On Thu, 8 Dec 2016 15:11:55 -0800 (PST), wrote:

On Tue, 21 May 2002 18:25:22 -0500, "Ronald Thompson"
wrote:
I just repaired an old gas tank on a ford van.....

So far, so good. Does anyone know what I can use to dissipate
the remaining water? I thought of rubbing alcohol, but IIRC it
has a high water content to start with. Any ideas?

Around here (Southern Ontario) the srug stores sell 99% Isopropyl
alcohol as "Rubbing Alcohol," which should do it nicely. The the
70% alcohol / 30% water mix is called "Rubbing Alcohol Compound."


I'm definitely not a chemist, but the presence of alcohol usually accompanies corrosion.

"The alcohol attracts water, leading to increased corrosion in metal gas tanks". (its a quote commonly found on the internet)



They used to sell some stuff called "dry gas" to remove water from
automotive fuel tanks. It was simply alcohol. The alcohol mixes with
the water which makes a combustible mixture and is burned by the
engine. In fact the gasoline/alcohol fuel blends will absorb some
water normally.
--
cheers,

John B.


Cydrome Leader December 9th 16 12:39 AM

Gas tank rust
 
wrote:
On Tue, 21 May 2002 18:25:22 -0500, "Ronald Thompson"
wrote:
I just repaired an old gas tank on a ford van.....

So far, so good. Does anyone know what I can use to dissipate
the remaining water? I thought of rubbing alcohol, but IIRC it
has a high water content to start with. Any ideas?

Around here (Southern Ontario) the srug stores sell 99% Isopropyl
alcohol as "Rubbing Alcohol," which should do it nicely. The the
70% alcohol / 30% water mix is called "Rubbing Alcohol Compound."


I'm definitely not a chemist, but the presence of alcohol usually accompanies corrosion.

"The alcohol attracts water, leading to increased corrosion in metal gas tanks". (its a quote commonly found on the internet)


Do they sell Heet at the auto store by you?



[email protected] December 9th 16 06:00 AM

Gas tank rust
 
John B. wrote:

On Thu, 8 Dec 2016 15:11:55 -0800 (PST), wrote:
On Tue, 21 May 2002 18:25:22 -0500, "Ronald Thompson"
wrote:

Around here (Southern Ontario) the srug stores sell 99% Isopropyl
alcohol as "Rubbing Alcohol," which should do it nicely. The the
70% alcohol / 30% water mix is called "Rubbing Alcohol Compound."


I'm definitely not a chemist, but the presence of alcohol usually accompanies corrosion.

"The alcohol attracts water, leading to increased corrosion in
metal gas tanks". (its a quote commonly found on the internet)


They used to sell some stuff called "dry gas" to remove water
from automotive fuel tanks. It was simply alcohol. The alcohol
mixes with the water which makes a combustible mixture and is
burned by the engine. In fact the gasoline/alcohol fuel blends
will absorb some water normally.


Before the water leaves the tank, I guess the rust or other debris from any corrosion remains.


All times are GMT +1. The time now is 08:02 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter