Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
I finally found a stereo microscope that I could afford.
I finally found a stereo microscope that I could afford. It is a B&L
StereoZoom4 on a boom. I need a pair of 23mm 10X eyepieces, and the 38 mm light mounting ring. I know that some of you have some spare parts, and I would prefer to buy from the group, than from eBay. I will buy a LED light ring and the rubber eyepieces there. I can get a pair of AmScope 10X Widefield eyepieces for $17.98 http://www.ebay.com/itm/141956480078 The mounting ring (with a glass seal) for a ring light is $34.99 http://www.ebay.com/itm/261046407988 A 56 LED ring light is $13.85 http://www.ebay.com/itm/141771661593 A 144LED ring light is $23.75 http://www.ebay.com/itm/271482803721 2PCS Eye Guards Stereo Microscope eyepiece Eye Piece are $5.50 http://www.ebay.com/itm/181983775978 Any comments? -- Never **** off an Engineer! They don't get mad. They don't get even. They go for over unity! ;-) |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
I finally found a stereo microscope that I could afford.
On Tuesday, September 20, 2016 at 5:26:01 PM UTC-7, Michael Terrell wrote:
I finally found a stereo microscope that I could afford. It is a B&L StereoZoom4 on a boom. I need a pair of 23mm 10X eyepieces, and the 38 mm light mounting ring. Sweet! I've enjoyed the StereoZoom 3 (but never found a boom unattached to a large pricetag). Wide field eyepieces are a must, I've been happy with these http://www.surplusshed.com/pages/item/l1861d.html but if you can find the 5x ones, get them instead. Glancing illumination is sometimes better than the light ring, consider one of these http://www.ikea.com/us/en/catalog/products/20169658/ |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
I finally found a stereo microscope that I could afford.
whit3rd wrote:
On Tuesday, September 20, 2016 at 5:26:01 PM UTC-7, Michael Terrell wrote: I finally found a stereo microscope that I could afford. It is a B&L StereoZoom4 on a boom. I need a pair of 23mm 10X eyepieces, and the 38 mm light mounting ring. Sweet! I've enjoyed the StereoZoom 3 (but never found a boom unattached to a large pricetag). Wide field eyepieces are a must, I've been happy with these http://www.surplusshed.com/pages/item/l1861d.html That looks like the same as the one on eBay. It would be $25 for a pair,k plus shipping VS $18 delivered from eBay. but if you can find the 5x ones, get them instead. Glancing illumination is sometimes better than the light ring, consider one of these http://www.ikea.com/us/en/catalog/products/20169658/ I used a SSZ-7 at Microdyne, and I tried every light source they had. The ring light was best, for looking for bad solder work, and for doing rework. It wasn't LED, and had a small gap in the lighting at the ends of the glass tube. I was hand soldering leads that were .015" center to center, and any other type of light required constantly turning and moving the PC board. This is the microscope that I bought. The seller was sking a higher price, but they accepted my offer. http://www.ebay.com/itm/172165617617 -- Never **** off an Engineer! They don't get mad. They don't get even. They go for over unity! ;-) |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
I finally found a stereo microscope that I could afford.
On 21-Sep-16 8:39 AM, whit3rd wrote:
On Tuesday, September 20, 2016 at 5:26:01 PM UTC-7, Michael Terrell wrote: I finally found a stereo microscope that I could afford. It is a B&L StereoZoom4 on a boom. I need a pair of 23mm 10X eyepieces, and the 38 mm light mounting ring. Sweet! I've enjoyed the StereoZoom 3 (but never found a boom unattached to a large pricetag). Wide field eyepieces are a must, I've been happy with these http://www.surplusshed.com/pages/item/l1861d.html but if you can find the 5x ones, get them instead. Glancing illumination is sometimes better than the light ring, consider one of these http://www.ikea.com/us/en/catalog/products/20169658/ I mounted two of them to my uscope base as well. They work very well. |
#5
Posted to rec.crafts.metalworking
|
|||
|
|||
I finally found a stereo microscope that I could afford.
On Tue, 20 Sep 2016 20:25:57 -0400, "Michael A. Terrell"
wrote: I finally found a stereo microscope that I could afford. It is a B&L StereoZoom4 on a boom. I need a pair of 23mm 10X eyepieces, and the 38 mm light mounting ring. I know that some of you have some spare parts, and I would prefer to buy from the group, than from eBay. I will buy a LED light ring and the rubber eyepieces there. Gunner might answer you with a complete scope setup. If you're not picky and would accept a headpiece, I found a multi-focal 10-25x set of lighted spectacles on eBay. They go for $9 delivered (from just up your street in Sou CAYlina) now. http://tinyurl.com/zwyber4 (Just in case you don't need Bausch and Lomb quality.) I'm thrilled with mine, once I got over the loopy stomach @25x. That's a CLOSE focus. It was hard to get the tweezers in there to rip out the splinter. Sucha Deal, tho. g -- The goal to strive for is a poor government but a rich people. --Andrew Johnson |
#6
Posted to rec.crafts.metalworking
|
|||
|
|||
I finally found a stereo microscope that I could afford.
Larry Jaques wrote:
On Tue, 20 Sep 2016 20:25:57 -0400, "Michael A. Terrell" wrote: I finally found a stereo microscope that I could afford. It is a B&L StereoZoom4 on a boom. I need a pair of 23mm 10X eyepieces, and the 38 mm light mounting ring. I know that some of you have some spare parts, and I would prefer to buy from the group, than from eBay. I will buy a LED light ring and the rubber eyepieces there. Gunner might answer you with a complete scope setup. If you're not picky and would accept a headpiece, I found a multi-focal 10-25x set of lighted spectacles on eBay. They go for $9 delivered (from just up your street in Sou CAYlina) now. http://tinyurl.com/zwyber4 (Just in case you don't need Bausch and Lomb quality.) I'm thrilled with mine, once I got over the loopy stomach @25x. That's a CLOSE focus. It was hard to get the tweezers in there to rip out the splinter. Sucha Deal, tho. g Larry, have you ever used a boom microscope with zoom? A twist of the knob, and the objective can be set anywhere between .7 to 3.0 magnification. With 10X eyepieces, it gives you a range from 7X to 30X. Other eyepieces or objective lenses can give other ranges. The StereoZoom 7 that I used daily at Microdyne had an even wider range, without changing lenses. I have tried the head mounted magnifiers, with poor results. -- Never **** off an Engineer! They don't get mad. They don't get even. They go for over unity! ;-) |
#7
Posted to rec.crafts.metalworking
|
|||
|
|||
I finally found a stereo microscope that I could afford.
On Wed, 21 Sep 2016 05:41:50 -0400, "Michael A. Terrell"
wrote: Larry Jaques wrote: On Tue, 20 Sep 2016 20:25:57 -0400, "Michael A. Terrell" wrote: I finally found a stereo microscope that I could afford. It is a B&L StereoZoom4 on a boom. I need a pair of 23mm 10X eyepieces, and the 38 mm light mounting ring. I know that some of you have some spare parts, and I would prefer to buy from the group, than from eBay. I will buy a LED light ring and the rubber eyepieces there. Gunner might answer you with a complete scope setup. If you're not picky and would accept a headpiece, I found a multi-focal 10-25x set of lighted spectacles on eBay. They go for $9 delivered (from just up your street in Sou CAYlina) now. http://tinyurl.com/zwyber4 (Just in case you don't need Bausch and Lomb quality.) I'm thrilled with mine, once I got over the loopy stomach @25x. That's a CLOSE focus. It was hard to get the tweezers in there to rip out the splinter. Sucha Deal, tho. g Larry, have you ever used a boom microscope with zoom? A twist of the knob, and the objective can be set anywhere between .7 to 3.0 magnification. With 10X eyepieces, it gives you a range from 7X to 30X. Other eyepieces or objective lenses can give other ranges. The StereoZoom 7 that I used daily at Microdyne had an even wider range, without changing lenses. Nice. No, I haven't used one, but I got a demo on an optical comparator at a vendor's shop once back in my QA days in the early 70s. I'm guessing you're using this to work with death's head moths, right? wink https://www.youtube.com/watch?v=t3woSuuzQuc and https://www.youtube.com/watch?v=4Lz1GFwXhr4 The scene at 1:24 is the last time I saw a boom mike. Aren't memories weird? I have tried the head mounted magnifiers, with poor results. They do leave something to be desired, but they're hundreds (if not thousands) of dollars cheaper. Amount of use usually determines what you're willing to spend on one, I guess. You hadn't let on that you had already bought one when I suggested it, though, or I wouldn't have. I'm guessing you're using this to work with death's head moths, right? wink https://www.youtube.com/watch?v=t3woSuuzQuc -- The goal to strive for is a poor government but a rich people. --Andrew Johnson |
#8
Posted to rec.crafts.metalworking
|
|||
|
|||
I finally found a stereo microscope that I could afford.
On 21/09/2016 10:25 AM, Michael A. Terrell wrote:
I finally found a stereo microscope that I could afford. It is a B&L StereoZoom4 on a boom. Have one of those, on the boom. Added an LED ring light, WAY better than the OEM light! Used to have a Levin and did some very tiny parts on it under the scope. You'll like it! Jon --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus |
#9
Posted to rec.crafts.metalworking
|
|||
|
|||
I finally found a stereo microscope that I could afford.
I made my own stand out of a wrecked Buck adjustable chuck (must have been
crashed, jaws are out of line) and some MacPherson strut rods. Works GREAT! I made my own ring light out of a piece of PC board material and 8 white LEDs. I cut a ring-groove, so there are two concentric rings of copper, powered by a 12V wall wart. 1K current limit resistors for each LED. I leave enough lead so all the LEDs can be pointed at where the scope looks. Jon |
#10
Posted to rec.crafts.metalworking
|
|||
|
|||
I finally found a stereo microscope that I could afford.
On Tue, 20 Sep 2016 22:02:29 -0400, "Michael A. Terrell"
wrote: whit3rd wrote: On Tuesday, September 20, 2016 at 5:26:01 PM UTC-7, Michael Terrell wrote: I finally found a stereo microscope that I could afford. It is a B&L StereoZoom4 on a boom. I need a pair of 23mm 10X eyepieces, and the 38 mm light mounting ring. Sweet! I've enjoyed the StereoZoom 3 (but never found a boom unattached to a large pricetag). Wide field eyepieces are a must, I've been happy with these http://www.surplusshed.com/pages/item/l1861d.html That looks like the same as the one on eBay. It would be $25 for a pair,k plus shipping VS $18 delivered from eBay. but if you can find the 5x ones, get them instead. Glancing illumination is sometimes better than the light ring, consider one of these http://www.ikea.com/us/en/catalog/products/20169658/ I used a SSZ-7 at Microdyne, and I tried every light source they had. The ring light was best, for looking for bad solder work, and for doing rework. It wasn't LED, and had a small gap in the lighting at the ends of the glass tube. I was hand soldering leads that were .015" center to center, and any other type of light required constantly turning and moving the PC board. This is the microscope that I bought. The seller was sking a higher price, but they accepted my offer. http://www.ebay.com/itm/172165617617 Nice!! --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus |
#11
Posted to rec.crafts.metalworking
|
|||
|
|||
I finally found a stereo microscope that I could afford.
On Tue, 20 Sep 2016 21:30:23 -0700, Larry Jaques
wrote: On Tue, 20 Sep 2016 20:25:57 -0400, "Michael A. Terrell" wrote: I finally found a stereo microscope that I could afford. It is a B&L StereoZoom4 on a boom. I need a pair of 23mm 10X eyepieces, and the 38 mm light mounting ring. I know that some of you have some spare parts, and I would prefer to buy from the group, than from eBay. I will buy a LED light ring and the rubber eyepieces there. Gunner might answer you with a complete scope setup. Im sure Michael has scopes. Probably more than I do. https://goo.gl/photos/4CdCCSpjRKMpSVRv9 If you're not picky and would accept a headpiece, I found a multi-focal 10-25x set of lighted spectacles on eBay. They go for $9 delivered (from just up your street in Sou CAYlina) now. http://tinyurl.com/zwyber4 (Just in case you don't need Bausch and Lomb quality.) I'm thrilled with mine, once I got over the loopy stomach @25x. That's a CLOSE focus. It was hard to get the tweezers in there to rip out the splinter. Sucha Deal, tho. g --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus |
#12
Posted to rec.crafts.metalworking
|
|||
|
|||
I finally found a stereo microscope that I could afford.
Gunner Asch wrote:
On Tue, 20 Sep 2016 21:30:23 -0700, Larry Jaques wrote: On Tue, 20 Sep 2016 20:25:57 -0400, "Michael A. Terrell" wrote: I finally found a stereo microscope that I could afford. It is a B&L StereoZoom4 on a boom. I need a pair of 23mm 10X eyepieces, and the 38 mm light mounting ring. I know that some of you have some spare parts, and I would prefer to buy from the group, than from eBay. I will buy a LED light ring and the rubber eyepieces there. Gunner might answer you with a complete scope setup. Im sure Michael has scopes. Probably more than I do. https://goo.gl/photos/4CdCCSpjRKMpSVRv9 What model is the little Sony/Tektronix? It looks like a 323 or a 324. The for channel to the left looks like a 2465, and I see a what looks lit a URM/25 series military signal generator in the top left. A couple Fluke bench meters are next to it. I have 17 Tektronix scopes, and a military scope built by Magnavox. I have one HP video waveform monitor that was built for Western Electric as the KS-19763L1A. It is a drop in replacement for a Tektronix RM529, but it has the WE video connectors, instead of BNC. -- Never **** off an Engineer! They don't get mad. They don't get even. They go for over unity! ;-) |
#13
Posted to rec.crafts.metalworking
|
|||
|
|||
I finally found a stereo microscope that I could afford.
Gunner Asch wrote:
On Tue, 20 Sep 2016 22:02:29 -0400, "Michael A. Terrell" wrote: This is the microscope that I bought. The seller was sking a higher price, but they accepted my offer. http://www.ebay.com/itm/172165617617 Nice!! It is quite similar to what I used at Microdyne, 15+ years ago. Same brand, but a slightly different head. -- Never **** off an Engineer! They don't get mad. They don't get even. They go for over unity! ;-) |
#14
Posted to rec.crafts.metalworking
|
|||
|
|||
I finally found a stereo microscope that I could afford.
On Wed, 21 Sep 2016 22:28:50 -0400, "Michael A. Terrell"
wrote: Gunner Asch wrote: On Tue, 20 Sep 2016 22:02:29 -0400, "Michael A. Terrell" wrote: This is the microscope that I bought. The seller was sking a higher price, but they accepted my offer. http://www.ebay.com/itm/172165617617 Nice!! It is quite similar to what I used at Microdyne, 15+ years ago. Same brand, but a slightly different head. I have a Spencer zoom stereo head mounted on an arm. Got a Nikon stereo head mounted on a base and several other microscopes, along with a nice old Spencer biological microscope https://goo.gl/photos/GGNzx9ANzSDz9Bza6 Sorry about the picture quality..the flash in my "desk camera" appears to have failed. The microscopes are covered in dust...Ive not used them in years. If Id known you needed one..we might have done some swapping and trading. If they dont show..let me know and Ill post em someplace else. Im having trouble with Google Photos...$&^!! When they discontinued Picasa..they screwed the pooch. Gunner --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus |
#15
Posted to rec.crafts.metalworking
|
|||
|
|||
I finally found a stereo microscope that I could afford.
On Wed, 21 Sep 2016 22:15:39 -0400, "Michael A. Terrell"
wrote: Gunner Asch wrote: On Tue, 20 Sep 2016 21:30:23 -0700, Larry Jaques wrote: On Tue, 20 Sep 2016 20:25:57 -0400, "Michael A. Terrell" wrote: I finally found a stereo microscope that I could afford. It is a B&L StereoZoom4 on a boom. I need a pair of 23mm 10X eyepieces, and the 38 mm light mounting ring. I know that some of you have some spare parts, and I would prefer to buy from the group, than from eBay. I will buy a LED light ring and the rubber eyepieces there. Gunner might answer you with a complete scope setup. Im sure Michael has scopes. Probably more than I do. https://goo.gl/photos/4CdCCSpjRKMpSVRv9 What model is the little Sony/Tektronix? It looks like a 323 or a 324. The for channel to the left looks like a 2465, and I see a what looks lit a URM/25 series military signal generator in the top left. A couple Fluke bench meters are next to it. Its a 323. Got a Hitachi V525 in the work station to the left B&K 2150 Tek 475 Tek 2245A SG-85/URM-250 RF generator Tek 191 RF generator I need a box to put it into Protek 8-801 function generator The usual mix of Tek multi meters, freq counters etc etc. Got a bunch of stuff up on the shelf above that stuff in the photo, watt meters, standing wave meters, decade boxes, various soldering stations..the usual flotsom and jetsom...shrug. A couple spare function generators..etc etc. Got a nice Panasonic multiband receiver and a Kenwood TS-520SE transeiver which I need to fire up one of these days and see if it actually works. The work station of course has the scope, meters, several variable powersupplies, 0-24vt 10 amps, 0-110vts AC/DC 5 amps, another soldering station that gets most of the work (Weller WES51) etc etc. I have 17 Tektronix scopes, and a military scope built by Magnavox. I have one HP video waveform monitor that was built for Western Electric as the KS-19763L1A. It is a drop in replacement for a Tektronix RM529, but it has the WE video connectors, instead of BNC. OOooooo!!! Nice!! Im missing at least 2 more scopes...no idea what I did with one B&K of some sort IRRC...I think Larry got the other one..no memory of what the Mod was. Remember it was 3 pieces, one was battery, one was charger..the other was the scope, all clamped together. Bullet proof old bitch, I used it for years in the field and was calibrated well. (Now I usually use the 323 or the 475) It worked just fine..batteries were toast/missing. Speaking of batteries..ever run across a 2XX series scope..PLEASE keep me in mind. Had one grow legs and walk off when my truck was burgled about 2004 or so...would really like to have another one to keep in my kit. I dont use a scope in the field (I repair machine tools..manual and CNC etc etc) all that often..maybe once or twice a month..but having a mini like the 200s and being able to keep it in my electronics box, rather than banging around inside the truck..would be groovy. Ive seen some cell phone sized scopes on Ebay..most were out of my price range in these slim times..others..dont know much about them. Are any of the adapters that attach to a laptop any good? I picked up a General Dynamics laptop to replace my elderly Armada 1700 (200 MHZ!!! Wheee!!) which worked well enough doing RS-234/485 duty..but it was getting really..really long in the tooth....but..it still works..Its in my electronics shop on the shelf for laptop duty stuff. Im a technician, heavily weighted for mechanical repair/conversions...and am a bit rusty at the electron pushing end of the spectrum...whistle the tune and I can usually drum along...shrug. Gunner --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus |
#16
Posted to rec.crafts.metalworking
|
|||
|
|||
I finally found a stereo microscope that I could afford.
On Wed, 21 Sep 2016 22:20:29 -0700, Gunner Asch
wrote: On Wed, 21 Sep 2016 22:28:50 -0400, "Michael A. Terrell" wrote: Gunner Asch wrote: On Tue, 20 Sep 2016 22:02:29 -0400, "Michael A. Terrell" wrote: This is the microscope that I bought. The seller was sking a higher price, but they accepted my offer. http://www.ebay.com/itm/172165617617 Nice!! It is quite similar to what I used at Microdyne, 15+ years ago. Same brand, but a slightly different head. I have a Spencer zoom stereo head mounted on an arm. Got a Nikon stereo head mounted on a base and several other microscopes, along with a nice old Spencer biological microscope https://goo.gl/photos/GGNzx9ANzSDz9Bza6 Sorry about the picture quality..the flash in my "desk camera" appears to have failed. The microscopes are covered in dust...Ive not used them in years. If Id known you needed one..we might have done some swapping and trading. If they dont show..let me know and Ill post em someplace else. Im having trouble with Google Photos...$&^!! When they discontinued Picasa..they screwed the pooch. Did they allow you to grab your stored pics first, I hope? I hadn't heard that Picasa went TU. -- The goal to strive for is a poor government but a rich people. --Andrew Johnson |
#17
Posted to rec.crafts.metalworking
|
|||
|
|||
I finally found a stereo microscope that I could afford.
On Thu, 22 Sep 2016 06:31:21 -0700, Gunner Asch
wrote: Im a technician, heavily weighted for mechanical repair/conversions...and am a bit rusty at the electron pushing end of the spectrum...whistle the tune and I can usually drum along...shrug. Bwahahaha! No. That's merely another of your phony skills. If you had any of them then you wouldn't be a broke unemployed lifetime loser. This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus What email? Moron! |
#18
Posted to rec.crafts.metalworking
|
|||
|
|||
I finally found a stereo microscope that I could afford.
On Wed, 21 Sep 2016 22:15:39 -0400, "Michael A. Terrell"
wrote: Gunner Asch wrote: On Tue, 20 Sep 2016 21:30:23 -0700, Larry Jaques wrote: On Tue, 20 Sep 2016 20:25:57 -0400, "Michael A. Terrell" wrote: I finally found a stereo microscope that I could afford. It is a B&L StereoZoom4 on a boom. I need a pair of 23mm 10X eyepieces, and the 38 mm light mounting ring. I know that some of you have some spare parts, and I would prefer to buy from the group, than from eBay. I will buy a LED light ring and the rubber eyepieces there. Gunner might answer you with a complete scope setup. Im sure Michael has scopes. Probably more than I do. https://goo.gl/photos/4CdCCSpjRKMpSVRv9 What model is the little Sony/Tektronix? It looks like a 323 or a 324. The for channel to the left looks like a 2465, and I see a what looks lit a URM/25 series military signal generator in the top left. A couple Fluke bench meters are next to it. His old 422 followed me home the August before last. I have 17 Tektronix scopes, and a military scope built by Magnavox. I hope you don't use them all at once. I have one HP video waveform monitor that was built for Western Electric as the KS-19763L1A. It is a drop in replacement for a Tektronix RM529, but it has the WE video connectors, instead of BNC. What is WE? -- The goal to strive for is a poor government but a rich people. --Andrew Johnson |
#19
Posted to rec.crafts.metalworking
|
|||
|
|||
I finally found a stereo microscope that I could afford.
Larry Jaques wrote:
On Wed, 21 Sep 2016 22:15:39 -0400, "Michael A. Terrell" wrote: Gunner Asch wrote: On Tue, 20 Sep 2016 21:30:23 -0700, Larry Jaques wrote: On Tue, 20 Sep 2016 20:25:57 -0400, "Michael A. Terrell" wrote: I finally found a stereo microscope that I could afford. It is a B&L StereoZoom4 on a boom. I need a pair of 23mm 10X eyepieces, and the 38 mm light mounting ring. I know that some of you have some spare parts, and I would prefer to buy from the group, than from eBay. I will buy a LED light ring and the rubber eyepieces there. Gunner might answer you with a complete scope setup. Im sure Michael has scopes. Probably more than I do. https://goo.gl/photos/4CdCCSpjRKMpSVRv9 What model is the little Sony/Tektronix? It looks like a 323 or a 324. The for channel to the left looks like a 2465, and I see a what looks lit a URM/25 series military signal generator in the top left. A couple Fluke bench meters are next to it. His old 422 followed me home the August before last. I have 17 Tektronix scopes, and a military scope built by Magnavox. I hope you don't use them all at once. Only you would try that. Some are for video work, others are standard scopes. I didn't list the three that are part of old service monitors for working on two way business radios, or VHF/UHF ham radios. I also have a Tektronix video test set with two scope tubes. It's the only thing I've ever seen with two displays. I would post a list of all of them, but most on the group wouldn't know one type from another. I have one HP video waveform monitor that was built for Western Electric as the KS-19763L1A. It is a drop in replacement for a Tektronix RM529, but it has the WE video connectors, instead of BNC. What is WE? Western Electric. They used a 75 ohm video connector that could be mounted in place of an audio jack in a patch panel. They are still used for video. The reason Western Electric did this was to simplify the layout and operation of their microwave and coaxial video longlines. The amplifiers and equalizers had to be monitored, and adjusted at each facility. The phase mismatch along the various routes was why old Network TV feeds were never the same tint from one feed to another. That went away with the C-band feeds in the late '70s. Here is an example of a WE series video patch cable: http://www.canare.com/ProductItemDisplay.aspx?productItemID=134 -- Never **** off an Engineer! They don't get mad. They don't get even. They go for over unity! ;-) |
#20
Posted to rec.crafts.metalworking
|
|||
|
|||
I finally found a stereo microscope that I could afford.
Gunner Asch wrote:
Michael A. Terrell wrote: What model is the little Sony/Tektronix? It looks like a 323 or a 324. The for channel to the left looks like a 2465, and I see a what looks lit a URM/25 series military signal generator in the top left. A couple Fluke bench meters are next to it. Its a 323. I have one 323 (5MHz) and three 324 (10MHz) All need new battery packs, and one of the 324 scopes is a parts mule. The power supply is missing, and it has several broken knobs. Got a Hitachi V525 in the work station to the left B&K 2150 Tek 475 Tek 2245A This is a handy resource for Tektronix scopes and some other Tektronix equipment: http://w140.com/tekwiki/wiki/Main_Page You might join the Yahoo Tekscopes group and ask if anyone has a cabinet for the 191: https://beta.groups.yahoo.com/neo/groups/TekScopes/info I recently picked up a Tektronix P6201, 900 MHz active probe with all the accessories and the storage case. http://w140.com/tekwiki/wiki/P6201 SG-85/URM-250 RF generator Tek 191 RF generator I need a box to put it into Protek 8-801 function generator The usual mix of Tek multi meters, freq counters etc etc. Got a bunch of stuff up on the shelf above that stuff in the photo, watt meters, standing wave meters, decade boxes, various soldering stations..the usual flotsom and jetsom...shrug. A couple spare function generators..etc etc. Got a nice Panasonic multi-band receiver and a Kenwood TS-520SE transceiver which I need to fire up one of these days and see if it actually works. The work station of course has the scope, meters, several variable power supplies, 0-24Volt 10Amp, 0-110vts AC/DC 5 amps, another soldering station that gets most of the work (Weller WES51) etc etc. I have 17 Tektronix scopes, and a military scope built by Magnavox. I have one HP video waveform monitor that was built for Western Electric as the KS-19763L1A. It is a drop in replacement for a Tektronix RM529, but it has the WE video connectors, instead of BNC. OOooooo!!! Nice!! Im missing at least 2 more scopes...no idea what I did with one B&K of some sort IRRC...I think Larry got the other one..no memory of what the Mod was. Remember it was 3 pieces, one was battery, one was charger..the other was the scope, all clamped together. Bullet proof old bitch, I used it for years in the field and was calibrated well. (Now I usually use the 323 or the 475) It worked just fine..batteries were toast/missing. Speaking of batteries..ever run across a 2XX series scope..PLEASE keep me in mind. Had one grow legs and walk off when my truck was burgled about 2004 or so...would really like to have another one to keep in my kit. I dont use a scope in the field (I repair machine tools..manual and CNC etc etc) all that often..maybe once or twice a month..but having a mini like the 200s and being able to keep it in my electronics box, rather than banging around inside the truck..would be groovy. Ive seen some cell phone sized scopes on Ebay..most were out of my price range in these slim times..others..dont know much about them. Are any of the adapters that attach to a laptop any good? I picked up a General Dynamics laptop to replace my elderly Armada 1700 (200 MHZ!!! Wheee!!) which worked well enough doing RS-234/485 duty..but it was getting really..really long in the tooth....but..it still works..Its in my electronics shop on the shelf for laptop duty stuff. Im a technician, heavily weighted for mechanical repair/conversions...and am a bit rusty at the electron pushing end of the spectrum...whistle the tune and I can usually drum along...shrug. Gunner -- Never **** off an Engineer! They don't get mad. They don't get even. They go for over unity! ;-) |
#21
Posted to rec.crafts.metalworking
|
|||
|
|||
I finally found a stereo microscope that I could afford.
On Thu, 22 Sep 2016 07:22:55 -0700, Larry Jaques
wrote: On Wed, 21 Sep 2016 22:20:29 -0700, Gunner Asch wrote: On Wed, 21 Sep 2016 22:28:50 -0400, "Michael A. Terrell" wrote: Gunner Asch wrote: On Tue, 20 Sep 2016 22:02:29 -0400, "Michael A. Terrell" wrote: This is the microscope that I bought. The seller was sking a higher price, but they accepted my offer. http://www.ebay.com/itm/172165617617 Nice!! It is quite similar to what I used at Microdyne, 15+ years ago. Same brand, but a slightly different head. I have a Spencer zoom stereo head mounted on an arm. Got a Nikon stereo head mounted on a base and several other microscopes, along with a nice old Spencer biological microscope https://goo.gl/photos/GGNzx9ANzSDz9Bza6 Sorry about the picture quality..the flash in my "desk camera" appears to have failed. The microscopes are covered in dust...Ive not used them in years. If Id known you needed one..we might have done some swapping and trading. If they dont show..let me know and Ill post em someplace else. Im having trouble with Google Photos...$&^!! When they discontinued Picasa..they screwed the pooch. Did they allow you to grab your stored pics first, I hope? I hadn't heard that Picasa went TU. Yup..they allowed us to put them in an "archive" where we could download them, view them etc..just not change them..and getting to the archives is a pain in the ass. --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus |
#22
Posted to rec.crafts.metalworking
|
|||
|
|||
I finally found a stereo microscope that I could afford.
On Thu, 22 Sep 2016 10:51:09 -0400, "Michael A. Terrell"
wrote: Larry Jaques wrote: On Wed, 21 Sep 2016 22:15:39 -0400, "Michael A. Terrell" wrote: I have 17 Tektronix scopes, and a military scope built by Magnavox. I hope you don't use them all at once. Only you would try that. OK, so you don't multitask? What is WE? Western Electric. They used a 75 ohm video connector that could be mounted in place of an audio jack in a patch panel. They are still used for video. The reason Western Electric did this was to simplify the layout and operation of their microwave and coaxial video longlines. The Cool. amplifiers and equalizers had to be monitored, and adjusted at each facility. The phase mismatch along the various routes was why old Network TV feeds were never the same tint from one feed to another. That went away with the C-band feeds in the late '70s. Being only an end user, I didn't notice. Here is an example of a WE series video patch cable: http://www.canare.com/ProductItemDisplay.aspx?productItemID=134 OK. Springloaded or threaded? Ah dinna see nuts. -- The goal to strive for is a poor government but a rich people. --Andrew Johnson |
#23
Posted to rec.crafts.metalworking
|
|||
|
|||
I finally found a stereo microscope that I could afford.
Larry Jaques wrote:
On Thu, 22 Sep 2016 10:51:09 -0400, "Michael A. Terrell" wrote: Larry Jaques wrote: On Wed, 21 Sep 2016 22:15:39 -0400, "Michael A. Terrell" wrote: I have 17 Tektronix scopes, and a military scope built by Magnavox. I hope you don't use them all at once. Only you would try that. OK, so you don't multitask? You tell me. I have a TV on, a radio, and two computers. I can separate all the signals, while I work. I used to run a TV station while monitoring the radio station, and read books or repairing the equipment. What is WE? Western Electric. They used a 75 ohm video connector that could be mounted in place of an audio jack in a patch panel. They are still used for video. The reason Western Electric did this was to simplify the layout and operation of their microwave and coaxial video longlines. The Cool. amplifiers and equalizers had to be monitored, and adjusted at each facility. The phase mismatch along the various routes was why old Network TV feeds were never the same tint from one feed to another. That went away with the C-band feeds in the late '70s. Being only an end user, I didn't notice. I did. When a station would switch from local to network or back, there was always some phase shift in the chroma signal. Here is an example of a WE series video patch cable: http://www.canare.com/ProductItemDisplay.aspx?productItemID=134 OK. Springloaded or threaded? Ah dinna see nuts. The contacts in the jack held it in place. Look in a mirror and you will see the nut! ;-) -- Never **** off an Engineer! They don't get mad. They don't get even. They go for over unity! ;-) |
#24
Posted to rec.crafts.metalworking
|
|||
|
|||
I finally found a stereo microscope that I could afford.
On Wed, 21 Sep 2016 22:20:29 -0700, Gunner Asch
wrote: I have a Spencer zoom stereo head mounted on an arm. Got a Nikon stereo head mounted on a base and several other microscopes, along with a nice old Spencer biological microscope https://goo.gl/photos/GGNzx9ANzSDz9Bza6 Sorry about the picture quality..the flash in my "desk camera" appears to have failed. The microscopes are covered in dust...Ive not used them in years. If Id known you needed one..we might have done some swapping and trading. If they dont show..let me know and Ill post em someplace else. Im having trouble with Google Photos...$&^!! When they discontinued Picasa..they screwed the pooch. Gunner My apologies..I thought those photos had posted. Im working on finding a better posting host now.. Anyway's..I got em up. Wrong order...but..shrug...Google sucks https://goo.gl/photos/GGNzx9ANzSDz9Bza6 Man those are dusty....when Im done doing a glass bedding job on a SMLE later tonight, Ill get out the air hose and clean em up. --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus |
#25
Posted to rec.crafts.metalworking
|
|||
|
|||
I finally found a stereo microscope that I could afford.
On Thu, 22 Sep 2016 23:02:01 -0400, "Michael A. Terrell"
wrote: Larry Jaques wrote: On Thu, 22 Sep 2016 10:51:09 -0400, "Michael A. Terrell" wrote: amplifiers and equalizers had to be monitored, and adjusted at each facility. The phase mismatch along the various routes was why old Network TV feeds were never the same tint from one feed to another. That went away with the C-band feeds in the late '70s. Being only an end user, I didn't notice. I did. When a station would switch from local to network or back, there was always some phase shift in the chroma signal. Oh, I guess I did notice that after all, now that you mention it. Way early on, in the '60s. Here is an example of a WE series video patch cable: http://www.canare.com/ProductItemDisplay.aspx?productItemID=134 OK. Springloaded or threaded? Ah dinna see nuts. The contacts in the jack held it in place. Thot so. ook in a mirror and you will see the nut! ;-) Probably. And you have a loose nut between the seat and the keyboard. -- The goal to strive for is a poor government but a rich people. --Andrew Johnson |
#26
Posted to rec.crafts.metalworking
|
|||
|
|||
I finally found a stereo microscope that I could afford.
Larry Jaques wrote:
On Thu, 22 Sep 2016 23:02:01 -0400, "Michael A. Terrell" wrote: Larry Jaques wrote: On Thu, 22 Sep 2016 10:51:09 -0400, "Michael A. Terrell" wrote: amplifiers and equalizers had to be monitored, and adjusted at each facility. The phase mismatch along the various routes was why old Network TV feeds were never the same tint from one feed to another. That went away with the C-band feeds in the late '70s. Being only an end user, I didn't notice. I did. When a station would switch from local to network or back, there was always some phase shift in the chroma signal. Oh, I guess I did notice that after all, now that you mention it. Way early on, in the '60s. It was a problem until VITS was implemented Here is an example of a WE series video patch cable: http://www.canare.com/ProductItemDisplay.aspx?productItemID=134 OK. Springloaded or threaded? Ah dinna see nuts. The contacts in the jack held it in place. Thot so. Look in a mirror and you will see the nut! ;-) Probably. And you have a loose nut between the seat and the keyboard. No, the antibiotics took care of that, for now. -- Never **** off an Engineer! They don't get mad. They don't get even. They go for over unity! ;-) |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
stereo microscope to do SMT? | Electronics Repair | |||
Stereo zoom/boom microscope | Electronics Repair | |||
Found a toy i wish I could afford | Metalworking | |||
Finally found one! | Woodworking | |||
WTB stereo microscope | Metalworking |