Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Got Threads ?
No , not a snazzy jacket-n-tie , but threads like on a bolt . I've had a
little project layin' around that needed a replacement piece , one end threaded male 1.350-20 , the other end female 1/2-20 . I did use a tap for the 1/2" female , but single-pointed the 1.350 male on the lathe . Both fit just swell ... -- Snag |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Old Threads | Home Repair | |||
Studs With Mach. Screw Threads and Wood Screw Threads? | Home Repair | |||
O/T(ish) - BSP threads | UK diy | |||
More on odd threads.... | Metalworking | |||
5/16-27 threads | Metalworking |