Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
|
LinkBack | Thread Tools | Display Modes |
#41
Posted to rec.crafts.metalworking
|
|||
|
|||
Does this wire rope need to be replaced?
On 07/18/2015 03:32 PM, Larry Jaques wrote:
The old wire should be good scrap steel for someone. Martin Will make a great fence when strung between poles Hey could sell it to a Yuppie "artist" for lots of money. I wonder if it would be good sword material? technomaNge -- Kinda Damascus? |
#42
Posted to rec.crafts.metalworking
|
|||
|
|||
Does this wire rope need to be replaced?
On 2015-07-18, Gunner Asch wrote:
On Thu, 16 Jul 2015 08:40:29 -0500, Ignoramus23196 wrote: I just bought this Grove crane: http://igor.chudov.com/tmp/Grove-Crane/ It does work, in general. I am concerned that the wire rope on it is too rusted and may need to be replaced. I have a couple of pictures on that webpage above and I wanted to see what you think, whether that wire rope is no longer safe to use. I have a feeeling that it may be so. i NICE crane!! As for the cable...get yourself 10 gallons of diesel fuel, add about a gallon of cheap 10-30 weight oil..and a bug sprayer or big floppy paintbrush and wet down the cable on the drum. Raise the boom as far as it will go and unspool as much cable as you can and keep "painting" the cable with the diesel and oil until you cant let anymore out, then soak whatever is still on the spool ..then roller her back up and you should be good to go for a while. I looked at the photos and the cable looks pretty good. That surface rust isnt much..I was looking for broken strands..looks fine. After you diesel/oil the cable..it will bleed rust for a time..so dont park it on concrete, or where you cant get a pressure washer on it. Gunner Gunner, thanks in general, but when seen in person, you can see that the wire rope is rusted bad. I already bought replacement wire rope, I will oil it generously. I oiled wire rope on the winch of the semi trailer 6 months ago and it does not rust at all. I am just deciding between way oil and used hydraulic oil. i i |
#43
Posted to rec.crafts.metalworking
|
|||
|
|||
Does this wire rope need to be replaced?
On 2015-07-19, Gunner Asch wrote:
On Sat, 18 Jul 2015 13:32:00 -0700, Larry Jaques wrote: On Sat, 18 Jul 2015 11:10:44 -0700, Gunner Asch wrote: On Fri, 17 Jul 2015 22:21:17 -0500, Martin Eastburn wrote: The old wire should be good scrap steel for someone. Martin Will make a great fence when strung between poles Hey could sell it to a Yuppie "artist" for lots of money. 1/2" cable is pretty handy for many things It cannot be used for wire rope slings, I think. as it is so soft and flexible. |
#44
Posted to rec.crafts.metalworking
|
|||
|
|||
Does this wire rope need to be replaced?
On Sat, 18 Jul 2015 18:09:02 -0700, Gunner Asch
wrote: On Sat, 18 Jul 2015 13:32:00 -0700, Larry Jaques wrote: On Sat, 18 Jul 2015 11:10:44 -0700, Gunner Asch wrote: On Fri, 17 Jul 2015 22:21:17 -0500, Martin Eastburn wrote: The old wire should be good scrap steel for someone. Martin Will make a great fence when strung between poles Hey could sell it to a Yuppie "artist" for lots of money. 1/2" cable is pretty handy for many things You should have had your readers on for that pic, Gramps. The rust cakes on top of that cable were deep. Last pic, magnified. -- My desire to be well-informed is currently at odds with my desire to remain sane. --Sipkess |
#45
Posted to rec.crafts.metalworking
|
|||
|
|||
Does this wire rope need to be replaced?
On Sat, 18 Jul 2015 23:25:25 -0500, Ignoramus3944
wrote: On 2015-07-18, Gunner Asch wrote: On Thu, 16 Jul 2015 08:40:29 -0500, Ignoramus23196 wrote: I just bought this Grove crane: http://igor.chudov.com/tmp/Grove-Crane/ It does work, in general. I am concerned that the wire rope on it is too rusted and may need to be replaced. I have a couple of pictures on that webpage above and I wanted to see what you think, whether that wire rope is no longer safe to use. I have a feeeling that it may be so. i NICE crane!! As for the cable...get yourself 10 gallons of diesel fuel, add about a gallon of cheap 10-30 weight oil..and a bug sprayer or big floppy paintbrush and wet down the cable on the drum. Raise the boom as far as it will go and unspool as much cable as you can and keep "painting" the cable with the diesel and oil until you cant let anymore out, then soak whatever is still on the spool ..then roller her back up and you should be good to go for a while. I looked at the photos and the cable looks pretty good. That surface rust isnt much..I was looking for broken strands..looks fine. After you diesel/oil the cable..it will bleed rust for a time..so dont park it on concrete, or where you cant get a pressure washer on it. Gunner Gunner, thanks in general, but when seen in person, you can see that the wire rope is rusted bad. I already bought replacement wire rope, I will oil it generously. I oiled wire rope on the winch of the semi trailer 6 months ago and it does not rust at all. I am just deciding between way oil and used hydraulic oil. http://www.machinerylubrication.com/...pe-lubrication May we ask what you paid per foot? -- My desire to be well-informed is currently at odds with my desire to remain sane. --Sipkess |
#46
Posted to rec.crafts.metalworking
|
|||
|
|||
Does this wire rope need to be tightened around homo mark wieber'sneck
On 7/18/2015 9:27 PM, Larry Jaques wrote:
On Sat, 18 Jul 2015 18:09:02 -0700, Gunner Asch wrote: On Sat, 18 Jul 2015 13:32:00 -0700, Larry Jaques wrote: On Sat, 18 Jul 2015 11:10:44 -0700, Gunner Asch wrote: On Fri, 17 Jul 2015 22:21:17 -0500, Martin Eastburn wrote: The old wire should be good scrap steel for someone. Martin Will make a great fence when strung between poles Hey could sell it to a Yuppie "artist" for lots of money. 1/2" cable is pretty handy for many things You should We should string wieber up with this wire rope. |
#47
Posted to rec.crafts.metalworking
|
|||
|
|||
Does this wire rope need to be replaced?
Gunner Asch on Sat, 18 Jul 2015 18:09:02 -0700
typed in rec.crafts.metalworking the following: On Sat, 18 Jul 2015 13:32:00 -0700, Larry Jaques wrote: On Sat, 18 Jul 2015 11:10:44 -0700, Gunner Asch wrote: On Fri, 17 Jul 2015 22:21:17 -0500, Martin Eastburn wrote: The old wire should be good scrap steel for someone. Will make a great fence when strung between poles Hey could sell it to a Yuppie "artist" for lots of money. 1/2" cable is pretty handy for many things I've even seen it used as raw material for knife blades. -- pyotr filipivich "With Age comes Wisdom. Although more often, Age travels alone." |
#48
Posted to rec.crafts.metalworking
|
|||
|
|||
Does this wire rope need to be replaced?
On Sat, 18 Jul 2015 20:43:44 -0500, "Lloyd E. Sponenburgh"
lloydspinsidemindspring.com wrote: Gunner Asch fired this volley in : 1/2" cable is pretty handy for many things Yeah...I know you weren't maritime. "Rope" is always metal. "Line" is fiber. "Cable" is electrical. G (old Navy) Lloyd G (Old Army and oil field trash) Gunner |
#49
Posted to rec.crafts.metalworking
|
|||
|
|||
Does this wire rope need to be replaced?
On Sat, 18 Jul 2015 23:26:02 -0500, Ignoramus3944
wrote: On 2015-07-19, Gunner Asch wrote: On Sat, 18 Jul 2015 13:32:00 -0700, Larry Jaques wrote: On Sat, 18 Jul 2015 11:10:44 -0700, Gunner Asch wrote: On Fri, 17 Jul 2015 22:21:17 -0500, Martin Eastburn wrote: The old wire should be good scrap steel for someone. Martin Will make a great fence when strung between poles Hey could sell it to a Yuppie "artist" for lots of money. 1/2" cable is pretty handy for many things It cannot be used for wire rope slings, I think. as it is so soft and flexible. It makes EXCELLENT slings! However..nearly everyone has gone over to nylon lanyards and in some places..its law for certain weight ranges. |
#50
Posted to rec.crafts.metalworking
|
|||
|
|||
Does this wire rope need to be replaced?
On Sat, 18 Jul 2015 21:27:50 -0700, Larry Jaques
wrote: On Sat, 18 Jul 2015 18:09:02 -0700, Gunner Asch wrote: On Sat, 18 Jul 2015 13:32:00 -0700, Larry Jaques wrote: On Sat, 18 Jul 2015 11:10:44 -0700, Gunner Asch wrote: On Fri, 17 Jul 2015 22:21:17 -0500, Martin Eastburn wrote: The old wire should be good scrap steel for someone. Martin Will make a great fence when strung between poles Hey could sell it to a Yuppie "artist" for lots of money. 1/2" cable is pretty handy for many things You should have had your readers on for that pic, Gramps. The rust cakes on top of that cable were deep. Last pic, magnified. I did, sonny. The wraps were filled with dirt and rust, its true. Now if Iggy took out a angle grinder with a cup wheel on it...and gave it a quick cleaning..I think we would find its in much better shape than one would think. Shrug...between lumbering as a kid..and working for a hell of a long time in the oil patch..steel cable is not..not unfamiliar to me. But hey...Im 2500 miles away and frankly..I dont care much..but replacing 200 feet of it is going to be a bit..spendy, when purchasing decent line. http://unirope.com/products/ropes/wi...ope-selection/ There are several types that would do him a good job...the Super 8-R looks quite good. Gunner |
#51
Posted to rec.crafts.metalworking
|
|||
|
|||
Does this wire rope need to be replaced?
On Sat, 18 Jul 2015 21:45:05 -0700, pyotr filipivich
wrote: Gunner Asch on Sat, 18 Jul 2015 18:09:02 -0700 typed in rec.crafts.metalworking the following: On Sat, 18 Jul 2015 13:32:00 -0700, Larry Jaques wrote: On Sat, 18 Jul 2015 11:10:44 -0700, Gunner Asch wrote: On Fri, 17 Jul 2015 22:21:17 -0500, Martin Eastburn wrote: The old wire should be good scrap steel for someone. Will make a great fence when strung between poles Hey could sell it to a Yuppie "artist" for lots of money. 1/2" cable is pretty handy for many things I've even seen it used as raw material for knife blades. -- pyotr filipivich "With Age comes Wisdom. Although more often, Age travels alone." Works pretty good for knife blades..but you really need a good anvil and a forge to heat it properly..along with a damned good hammer |
#52
Posted to rec.crafts.metalworking
|
|||
|
|||
Does this wire rope need to be replaced?
On Sat, 18 Jul 2015 23:23:45 -0500, technomaNge
wrote: On 07/18/2015 03:32 PM, Larry Jaques wrote: The old wire should be good scrap steel for someone. Martin Will make a great fence when strung between poles Hey could sell it to a Yuppie "artist" for lots of money. I wonder if it would be good sword material? technomaNge 1/2" cable will forge out to about 1" in width and no more than 3/16 thick..so its simply not massive enough to make anything other than a sword cane out of...is my estimate. Remember..that cable contains a lot..lot of air. Now if you were using 3/4" 19x11 cable...might work out for something one could use. Gunner |
#53
Posted to rec.crafts.metalworking
|
|||
|
|||
Does this wire rope need to be replaced?
On Sat, 18 Jul 2015 22:36:30 -0500, Martin Eastburn
wrote: Being 1/2" it would be great 5 string wire fence. Oil well stem tubing posts. Wonder what the sag in the center of a length of 20 feet between posts is. Might have to go to 10'. The force to string it tight - through eyes bolted to the pipe might be just what the crane can help with. Attach and pull back and then clamp it off. Normally a loop back into a bolted clamp. Remember what summer heat and winter ice does. Maybe a spring in the end to take up the slack. We likely would tighten in Winter near cold day and then summer sag and back flat again come winter. Martin Ayup..real common here on horse property near the earl patch On 7/18/2015 1:10 PM, Gunner Asch wrote: On Fri, 17 Jul 2015 22:21:17 -0500, Martin Eastburn wrote: The old wire should be good scrap steel for someone. Martin Will make a great fence when strung between poles On 7/16/2015 8:49 PM, Ignoramus23196 wrote: On 2015-07-17, Larry Jaques wrote: On Thu, 16 Jul 2015 08:40:29 -0500, Ignoramus23196 wrote: I just bought this Grove crane: http://igor.chudov.com/tmp/Grove-Crane/ It does work, in general. Cool new toy, dude. I am concerned that the wire rope on it is too rusted and may need to be replaced. I have a couple of pictures on that webpage above and I wanted to see what you think, whether that wire rope is no longer safe to use. I have a feeeling that it may be so. There's no question about that. If you check the law, I'm sure you'll find that you can't lift anything until it has been replaced, even if it's on your own property. Your county/city/state may vary. Talk to a local building inspector (or a friendly OSHA guy) for more tips. But I thought you already researched erections in Illinoise. I will replace the wire rope promptly in a couple of days. I agree with you in general. |
#54
Posted to rec.crafts.metalworking
|
|||
|
|||
Does this wire rope need to be replaced?
On Sat, 18 Jul 2015 23:25:25 -0500, Ignoramus3944
wrote: On 2015-07-18, Gunner Asch wrote: On Thu, 16 Jul 2015 08:40:29 -0500, Ignoramus23196 wrote: I just bought this Grove crane: http://igor.chudov.com/tmp/Grove-Crane/ It does work, in general. I am concerned that the wire rope on it is too rusted and may need to be replaced. I have a couple of pictures on that webpage above and I wanted to see what you think, whether that wire rope is no longer safe to use. I have a feeeling that it may be so. i NICE crane!! As for the cable...get yourself 10 gallons of diesel fuel, add about a gallon of cheap 10-30 weight oil..and a bug sprayer or big floppy paintbrush and wet down the cable on the drum. Raise the boom as far as it will go and unspool as much cable as you can and keep "painting" the cable with the diesel and oil until you cant let anymore out, then soak whatever is still on the spool ..then roller her back up and you should be good to go for a while. I looked at the photos and the cable looks pretty good. That surface rust isnt much..I was looking for broken strands..looks fine. After you diesel/oil the cable..it will bleed rust for a time..so dont park it on concrete, or where you cant get a pressure washer on it. Gunner Gunner, thanks in general, but when seen in person, you can see that the wire rope is rusted bad. I already bought replacement wire rope, I will oil it generously. I oiled wire rope on the winch of the semi trailer 6 months ago and it does not rust at all. I am just deciding between way oil and used hydraulic oil. i i What kind of wire rope did you get and how much did you buy? Anti spin or something else? Gunner |
#55
Posted to rec.crafts.metalworking
|
|||
|
|||
Does this wire rope need to be replaced?
"Martin Eastburn" wrote in message
... I'd talk to experts. The thing about way oil is it is thick and sticky. Less dripping and evap off as with lighter oils. Made to stick. But check with cable guys and see what grade they use. I think hydraulic would be a bit to light being an outdoor crane. Martin On 7/18/2015 7:16 AM, Ignoramus3944 wrote: On 2015-07-18, Martin Eastburn wrote: Hum - keep an eye out on a 55gal drum of way oil ? :-) I had such a drum... You think that it is better that hydraulic oil, for lubing wire rope? i I stored my tractor with the home-made hydraulic bucket outdoors under a deck that leaked slighty. LPS-3 protected the bare metal from rust except where hydraulic oil leaks washed it off. -jsw |
#56
Posted to rec.crafts.metalworking
|
|||
|
|||
Does this wire rope need to be replaced?
"Lloyd E. Sponenburgh" lloydspinsidemindspring.com wrote in message
. 4.170... Gunner Asch fired this volley in : 1/2" cable is pretty handy for many things Yeah...I know you weren't maritime. "Rope" is always metal. "Line" is fiber. "Cable" is electrical. G (old Navy) Lloyd Navy definitions are very far from standard English, like saying "head" for what the rest of us associate with our other end. https://www.strategypage.com/humor/a...s/20020406.asp -jsw |
#57
Posted to rec.crafts.metalworking
|
|||
|
|||
Does this wire rope need to be replaced?
On Sat, 18 Jul 2015 22:36:30 -0500, Martin Eastburn
wrote: Being 1/2" it would be great 5 string wire fence. Oil well stem tubing posts. Wonder what the sag in the center of a length of 20 feet between posts is. Might have to go to 10'. The force to string it tight - through eyes bolted to the pipe might be just what the crane can help with. Attach and pull back and then clamp it off. Normally a loop back into a bolted clamp. Remember what summer heat and winter ice does. Maybe a spring in the end to take up the slack. We likely would tighten in Winter near cold day and then summer sag and back flat again come winter. Martin On 7/18/2015 1:10 PM, Gunner Asch wrote: On Fri, 17 Jul 2015 22:21:17 -0500, Martin Eastburn wrote: The old wire should be good scrap steel for someone. Martin Will make a great fence when strung between poles On 7/16/2015 8:49 PM, Ignoramus23196 wrote: On 2015-07-17, Larry Jaques wrote: On Thu, 16 Jul 2015 08:40:29 -0500, Ignoramus23196 wrote: I just bought this Grove crane: http://igor.chudov.com/tmp/Grove-Crane/ It does work, in general. Cool new toy, dude. I am concerned that the wire rope on it is too rusted and may need to be replaced. I have a couple of pictures on that webpage above and I wanted to see what you think, whether that wire rope is no longer safe to use. I have a feeeling that it may be so. There's no question about that. If you check the law, I'm sure you'll find that you can't lift anything until it has been replaced, even if it's on your own property. Your county/city/state may vary. Talk to a local building inspector (or a friendly OSHA guy) for more tips. But I thought you already researched erections in Illinoise. I will replace the wire rope promptly in a couple of days. I agree with you in general. Drill through the posts. Connect a threaded rod to the end of the cable. Run the end (rod) through the post and a stack of die springs and crank the nut down to compress the die springs and tension the cable. Self adjusting tensioned cable fence. |
#58
Posted to rec.crafts.metalworking
|
|||
|
|||
Does this wire rope need to be replaced?
Gunner Asch on Sat, 18 Jul 2015 22:37:35 -0700
typed in rec.crafts.metalworking the following: On Sat, 18 Jul 2015 21:45:05 -0700, pyotr filipivich wrote: Gunner Asch on Sat, 18 Jul 2015 18:09:02 -0700 typed in rec.crafts.metalworking the following: On Sat, 18 Jul 2015 13:32:00 -0700, Larry Jaques wrote: On Sat, 18 Jul 2015 11:10:44 -0700, Gunner Asch wrote: On Fri, 17 Jul 2015 22:21:17 -0500, Martin Eastburn wrote: The old wire should be good scrap steel for someone. Will make a great fence when strung between poles Hey could sell it to a Yuppie "artist" for lots of money. 1/2" cable is pretty handy for many things I've even seen it used as raw material for knife blades. -- pyotr filipivich "With Age comes Wisdom. Although more often, Age travels alone." Works pretty good for knife blades..but you really need a good anvil and a forge to heat it properly..along with a damned good hammer "beat on is like a smith with 'issues'." -- pyotr filipivich "With Age comes Wisdom. Although more often, Age travels alone." |
#59
Posted to rec.crafts.metalworking
|
|||
|
|||
Does this wire rope need to be replaced?
On Sun, 19 Jul 2015 08:21:32 -0700, pyotr filipivich
wrote: Gunner Asch on Sat, 18 Jul 2015 22:37:35 -0700 typed in rec.crafts.metalworking the following: On Sat, 18 Jul 2015 21:45:05 -0700, pyotr filipivich wrote: Gunner Asch on Sat, 18 Jul 2015 18:09:02 -0700 typed in rec.crafts.metalworking the following: On Sat, 18 Jul 2015 13:32:00 -0700, Larry Jaques wrote: On Sat, 18 Jul 2015 11:10:44 -0700, Gunner Asch wrote: On Fri, 17 Jul 2015 22:21:17 -0500, Martin Eastburn wrote: The old wire should be good scrap steel for someone. Will make a great fence when strung between poles Hey could sell it to a Yuppie "artist" for lots of money. 1/2" cable is pretty handy for many things I've even seen it used as raw material for knife blades. -- pyotr filipivich "With Age comes Wisdom. Although more often, Age travels alone." Works pretty good for knife blades..but you really need a good anvil and a forge to heat it properly..along with a damned good hammer "beat on is like a smith with 'issues'." -- pyotr filipivich "With Age comes Wisdom. Although more often, Age travels alone." The large majority of quality wire rope is made of plain, medium-carbon steel (1040 - 1050). It's a little soft for knife blades. -- Ed Huntress |
#60
Posted to rec.crafts.metalworking
|
|||
|
|||
Does this wire rope need to be replaced?
On Sun, 19 Jul 2015 08:47:17 -0400, "Jim Wilkins"
wrote: "Lloyd E. Sponenburgh" lloydspinsidemindspring.com wrote in message .4.170... Gunner Asch fired this volley in : 1/2" cable is pretty handy for many things Yeah...I know you weren't maritime. "Rope" is always metal. "Line" is fiber. "Cable" is electrical. G (old Navy) Lloyd Navy definitions are very far from standard English, like saying "head" for what the rest of us associate with our other end. https://www.strategypage.com/humor/a...s/20020406.asp Hah! Very good. -- My desire to be well-informed is currently at odds with my desire to remain sane. --Sipkess |
#61
Posted to rec.crafts.metalworking
|
|||
|
|||
Does this wire rope need to be replaced?
"Ignoramus3944" wrote in message
... On 2015-07-18, Gunner Asch wrote: Gunner, thanks in general, but when seen in person, you can see that the wire rope is rusted bad. I already bought replacement wire rope, I will oil it generously. I oiled wire rope on the winch of the semi trailer 6 months ago and it does not rust at all. I am just deciding between way oil and used hydraulic oil. i This may be helpful: http://www.hanessupply.com/content/pdfs/wirerope101.pdf It gives me a few things to check on the A frame hoist I've been using to stack logs. -jsw |
#62
Posted to rec.crafts.metalworking
|
|||
|
|||
Does this wire rope need to be replaced?
On 2015-07-19, technomaNge wrote:
On 07/18/2015 03:32 PM, Larry Jaques wrote: The old wire should be good scrap steel for someone. Martin Will make a great fence when strung between poles Hey could sell it to a Yuppie "artist" for lots of money. I wonder if it would be good sword material? It would be a good "plow" material, being made from "Extra Enhanced Plow Steel". i |
#63
Posted to rec.crafts.metalworking
|
|||
|
|||
Does this wire rope need to be replaced?
On 2015-07-19, Larry Jaques wrote:
On Sat, 18 Jul 2015 23:25:25 -0500, Ignoramus3944 wrote: On 2015-07-18, Gunner Asch wrote: On Thu, 16 Jul 2015 08:40:29 -0500, Ignoramus23196 wrote: I just bought this Grove crane: http://igor.chudov.com/tmp/Grove-Crane/ It does work, in general. I am concerned that the wire rope on it is too rusted and may need to be replaced. I have a couple of pictures on that webpage above and I wanted to see what you think, whether that wire rope is no longer safe to use. I have a feeeling that it may be so. i NICE crane!! As for the cable...get yourself 10 gallons of diesel fuel, add about a gallon of cheap 10-30 weight oil..and a bug sprayer or big floppy paintbrush and wet down the cable on the drum. Raise the boom as far as it will go and unspool as much cable as you can and keep "painting" the cable with the diesel and oil until you cant let anymore out, then soak whatever is still on the spool ..then roller her back up and you should be good to go for a while. I looked at the photos and the cable looks pretty good. That surface rust isnt much..I was looking for broken strands..looks fine. After you diesel/oil the cable..it will bleed rust for a time..so dont park it on concrete, or where you cant get a pressure washer on it. Gunner Gunner, thanks in general, but when seen in person, you can see that the wire rope is rusted bad. I already bought replacement wire rope, I will oil it generously. I oiled wire rope on the winch of the semi trailer 6 months ago and it does not rust at all. I am just deciding between way oil and used hydraulic oil. http://www.machinerylubrication.com/...pe-lubrication May we ask what you paid per foot? $1.67 |
#64
Posted to rec.crafts.metalworking
|
|||
|
|||
Does this wire rope need to be replaced?
On 2015-07-19, Gunner Asch wrote:
On Sat, 18 Jul 2015 23:25:25 -0500, Ignoramus3944 wrote: On 2015-07-18, Gunner Asch wrote: On Thu, 16 Jul 2015 08:40:29 -0500, Ignoramus23196 wrote: I just bought this Grove crane: http://igor.chudov.com/tmp/Grove-Crane/ It does work, in general. I am concerned that the wire rope on it is too rusted and may need to be replaced. I have a couple of pictures on that webpage above and I wanted to see what you think, whether that wire rope is no longer safe to use. I have a feeeling that it may be so. i NICE crane!! As for the cable...get yourself 10 gallons of diesel fuel, add about a gallon of cheap 10-30 weight oil..and a bug sprayer or big floppy paintbrush and wet down the cable on the drum. Raise the boom as far as it will go and unspool as much cable as you can and keep "painting" the cable with the diesel and oil until you cant let anymore out, then soak whatever is still on the spool ..then roller her back up and you should be good to go for a while. I looked at the photos and the cable looks pretty good. That surface rust isnt much..I was looking for broken strands..looks fine. After you diesel/oil the cable..it will bleed rust for a time..so dont park it on concrete, or where you cant get a pressure washer on it. Gunner Gunner, thanks in general, but when seen in person, you can see that the wire rope is rusted bad. I already bought replacement wire rope, I will oil it generously. I oiled wire rope on the winch of the semi trailer 6 months ago and it does not rust at all. I am just deciding between way oil and used hydraulic oil. i i What kind of wire rope did you get and how much did you buy? Anti spin or something else? 19x7, 1/2" thick, extra improved plow steel, 352 feet |
#65
Posted to rec.crafts.metalworking
|
|||
|
|||
Does this wire rope need to be replaced?
On 2015-07-19, Gunner Asch wrote:
You should have had your readers on for that pic, Gramps. The rust cakes on top of that cable were deep. Last pic, magnified. I did, sonny. The wraps were filled with dirt and rust, its true. Now if Iggy took out a angle grinder with a cup wheel on it...and gave it a quick cleaning..I think we would find its in much better shape than one would think. Shrug...between lumbering as a kid..and working for a hell of a long time in the oil patch..steel cable is not..not unfamiliar to me. But hey...Im 2500 miles away and frankly..I dont care much..but replacing 200 feet of it is going to be a bit..spendy, when purchasing decent line. http://unirope.com/products/ropes/wi...ope-selection/ There are several types that would do him a good job...the Super 8-R looks quite good. You do sound like you know something, indeed... i |
#66
Posted to rec.crafts.metalworking
|
|||
|
|||
Does this wire rope need to be replaced?
On Sun, 19 Jul 2015 16:01:58 -0500, Ignoramus22127
wrote: On 2015-07-19, Larry Jaques wrote: On Sat, 18 Jul 2015 23:25:25 -0500, Ignoramus3944 wrote: On 2015-07-18, Gunner Asch wrote: On Thu, 16 Jul 2015 08:40:29 -0500, Ignoramus23196 wrote: I just bought this Grove crane: http://igor.chudov.com/tmp/Grove-Crane/ It does work, in general. I am concerned that the wire rope on it is too rusted and may need to be replaced. I have a couple of pictures on that webpage above and I wanted to see what you think, whether that wire rope is no longer safe to use. I have a feeeling that it may be so. i NICE crane!! As for the cable...get yourself 10 gallons of diesel fuel, add about a gallon of cheap 10-30 weight oil..and a bug sprayer or big floppy paintbrush and wet down the cable on the drum. Raise the boom as far as it will go and unspool as much cable as you can and keep "painting" the cable with the diesel and oil until you cant let anymore out, then soak whatever is still on the spool ..then roller her back up and you should be good to go for a while. I looked at the photos and the cable looks pretty good. That surface rust isnt much..I was looking for broken strands..looks fine. After you diesel/oil the cable..it will bleed rust for a time..so dont park it on concrete, or where you cant get a pressure washer on it. Gunner Gunner, thanks in general, but when seen in person, you can see that the wire rope is rusted bad. I already bought replacement wire rope, I will oil it generously. I oiled wire rope on the winch of the semi trailer 6 months ago and it does not rust at all. I am just deciding between way oil and used hydraulic oil. http://www.machinerylubrication.com/...pe-lubrication May we ask what you paid per foot? $1.67 NICELY done! What kind was it? Gunner |
#67
Posted to rec.crafts.metalworking
|
|||
|
|||
Does this wire rope need to be replaced?
On Sun, 19 Jul 2015 16:04:27 -0500, Ignoramus22127
wrote: On 2015-07-19, Gunner Asch wrote: On Sat, 18 Jul 2015 23:25:25 -0500, Ignoramus3944 wrote: On 2015-07-18, Gunner Asch wrote: On Thu, 16 Jul 2015 08:40:29 -0500, Ignoramus23196 wrote: I just bought this Grove crane: http://igor.chudov.com/tmp/Grove-Crane/ It does work, in general. I am concerned that the wire rope on it is too rusted and may need to be replaced. I have a couple of pictures on that webpage above and I wanted to see what you think, whether that wire rope is no longer safe to use. I have a feeeling that it may be so. i NICE crane!! As for the cable...get yourself 10 gallons of diesel fuel, add about a gallon of cheap 10-30 weight oil..and a bug sprayer or big floppy paintbrush and wet down the cable on the drum. Raise the boom as far as it will go and unspool as much cable as you can and keep "painting" the cable with the diesel and oil until you cant let anymore out, then soak whatever is still on the spool ..then roller her back up and you should be good to go for a while. I looked at the photos and the cable looks pretty good. That surface rust isnt much..I was looking for broken strands..looks fine. After you diesel/oil the cable..it will bleed rust for a time..so dont park it on concrete, or where you cant get a pressure washer on it. Gunner Gunner, thanks in general, but when seen in person, you can see that the wire rope is rusted bad. I already bought replacement wire rope, I will oil it generously. I oiled wire rope on the winch of the semi trailer 6 months ago and it does not rust at all. I am just deciding between way oil and used hydraulic oil. i i What kind of wire rope did you get and how much did you buy? Anti spin or something else? 19x7, 1/2" thick, extra improved plow steel, 352 feet http://www.alpind.com/pdf_files/2011...nformation.pdf |
#68
Posted to rec.crafts.metalworking
|
|||
|
|||
Does this wire rope need to be replaced?
On Sun, 19 Jul 2015 16:06:33 -0500, Ignoramus22127
wrote: On 2015-07-19, Gunner Asch wrote: You should have had your readers on for that pic, Gramps. The rust cakes on top of that cable were deep. Last pic, magnified. I did, sonny. The wraps were filled with dirt and rust, its true. Now if Iggy took out a angle grinder with a cup wheel on it...and gave it a quick cleaning..I think we would find its in much better shape than one would think. Shrug...between lumbering as a kid..and working for a hell of a long time in the oil patch..steel cable is not..not unfamiliar to me. But hey...Im 2500 miles away and frankly..I dont care much..but replacing 200 feet of it is going to be a bit..spendy, when purchasing decent line. http://unirope.com/products/ropes/wi...ope-selection/ There are several types that would do him a good job...the Super 8-R looks quite good. You do sound like you know something, indeed... i Just an old country boy..nothing more nor less. Gonna use the old cable as a fence? Might help prevent those burglars ripping you off so easy. Did they ever get caught? Gunner |
#69
Posted to rec.crafts.metalworking
|
|||
|
|||
Does this wire rope need to be replaced?
On Sun, 19 Jul 2015 16:01:28 -0500, Ignoramus22127
wrote: On 2015-07-19, technomaNge wrote: On 07/18/2015 03:32 PM, Larry Jaques wrote: The old wire should be good scrap steel for someone. Martin Will make a great fence when strung between poles Hey could sell it to a Yuppie "artist" for lots of money. I wonder if it would be good sword material? It would be a good "plow" material, being made from "Extra Enhanced Plow Steel". i "Plow steel" is plain carbon steel, medium- to hight-carbon. It's an old term but today it applies mostly to the steel used in wire rope. Most wire rope steel is around 1050; rarely over 1070. Higher carbon is stronger, but it also has less ductility and elongation. So breaking a few fibers becomes more of a risk, because it stretches less before breaking, so it gives you less warning when it's ready to break. -- Ed Huntress |
#70
Posted to rec.crafts.metalworking
|
|||
|
|||
Does this wire rope need to be replaced?
On 2015-07-19, Gunner Asch wrote:
On Sun, 19 Jul 2015 16:01:58 -0500, Ignoramus22127 wrote: On 2015-07-19, Larry Jaques wrote: On Sat, 18 Jul 2015 23:25:25 -0500, Ignoramus3944 wrote: On 2015-07-18, Gunner Asch wrote: On Thu, 16 Jul 2015 08:40:29 -0500, Ignoramus23196 wrote: I just bought this Grove crane: http://igor.chudov.com/tmp/Grove-Crane/ It does work, in general. I am concerned that the wire rope on it is too rusted and may need to be replaced. I have a couple of pictures on that webpage above and I wanted to see what you think, whether that wire rope is no longer safe to use. I have a feeeling that it may be so. i NICE crane!! As for the cable...get yourself 10 gallons of diesel fuel, add about a gallon of cheap 10-30 weight oil..and a bug sprayer or big floppy paintbrush and wet down the cable on the drum. Raise the boom as far as it will go and unspool as much cable as you can and keep "painting" the cable with the diesel and oil until you cant let anymore out, then soak whatever is still on the spool ..then roller her back up and you should be good to go for a while. I looked at the photos and the cable looks pretty good. That surface rust isnt much..I was looking for broken strands..looks fine. After you diesel/oil the cable..it will bleed rust for a time..so dont park it on concrete, or where you cant get a pressure washer on it. Gunner Gunner, thanks in general, but when seen in person, you can see that the wire rope is rusted bad. I already bought replacement wire rope, I will oil it generously. I oiled wire rope on the winch of the semi trailer 6 months ago and it does not rust at all. I am just deciding between way oil and used hydraulic oil. http://www.machinerylubrication.com/...pe-lubrication May we ask what you paid per foot? $1.67 NICELY done! What kind was it? Gunner this is what I bought: http://www.uscargocontrol.com/Riggin...-2-Lineal-Foot Short URL: http://goo.gl/ra3BZ0 |
#71
Posted to rec.crafts.metalworking
|
|||
|
|||
Does this wire rope need to be replaced?
On Sun, 19 Jul 2015 18:30:59 -0500, Ignoramus22127
wrote: On 2015-07-19, Gunner Asch wrote: On Sun, 19 Jul 2015 16:01:58 -0500, Ignoramus22127 wrote: On 2015-07-19, Larry Jaques wrote: On Sat, 18 Jul 2015 23:25:25 -0500, Ignoramus3944 wrote: On 2015-07-18, Gunner Asch wrote: On Thu, 16 Jul 2015 08:40:29 -0500, Ignoramus23196 wrote: I just bought this Grove crane: http://igor.chudov.com/tmp/Grove-Crane/ It does work, in general. I am concerned that the wire rope on it is too rusted and may need to be replaced. I have a couple of pictures on that webpage above and I wanted to see what you think, whether that wire rope is no longer safe to use. I have a feeeling that it may be so. i NICE crane!! As for the cable...get yourself 10 gallons of diesel fuel, add about a gallon of cheap 10-30 weight oil..and a bug sprayer or big floppy paintbrush and wet down the cable on the drum. Raise the boom as far as it will go and unspool as much cable as you can and keep "painting" the cable with the diesel and oil until you cant let anymore out, then soak whatever is still on the spool ..then roller her back up and you should be good to go for a while. I looked at the photos and the cable looks pretty good. That surface rust isnt much..I was looking for broken strands..looks fine. After you diesel/oil the cable..it will bleed rust for a time..so dont park it on concrete, or where you cant get a pressure washer on it. Gunner Gunner, thanks in general, but when seen in person, you can see that the wire rope is rusted bad. I already bought replacement wire rope, I will oil it generously. I oiled wire rope on the winch of the semi trailer 6 months ago and it does not rust at all. I am just deciding between way oil and used hydraulic oil. http://www.machinerylubrication.com/...pe-lubrication May we ask what you paid per foot? $1.67 NICELY done! What kind was it? Gunner this is what I bought: http://www.uscargocontrol.com/Riggin...-2-Lineal-Foot Short URL: http://goo.gl/ra3BZ0 Good enough. Dual lays so it wont unwind, decent core and wire. Well done. Gunner |
#72
Posted to rec.crafts.metalworking
|
|||
|
|||
Does this wire rope need to be replaced?
On Sun, 19 Jul 2015 16:01:58 -0500, Ignoramus22127
wrote: On 2015-07-19, Larry Jaques wrote: On Sat, 18 Jul 2015 23:25:25 -0500, Ignoramus3944 wrote: On 2015-07-18, Gunner Asch wrote: On Thu, 16 Jul 2015 08:40:29 -0500, Ignoramus23196 wrote: I just bought this Grove crane: http://igor.chudov.com/tmp/Grove-Crane/ It does work, in general. I am concerned that the wire rope on it is too rusted and may need to be replaced. I have a couple of pictures on that webpage above and I wanted to see what you think, whether that wire rope is no longer safe to use. I have a feeeling that it may be so. i NICE crane!! As for the cable...get yourself 10 gallons of diesel fuel, add about a gallon of cheap 10-30 weight oil..and a bug sprayer or big floppy paintbrush and wet down the cable on the drum. Raise the boom as far as it will go and unspool as much cable as you can and keep "painting" the cable with the diesel and oil until you cant let anymore out, then soak whatever is still on the spool ..then roller her back up and you should be good to go for a while. I looked at the photos and the cable looks pretty good. That surface rust isnt much..I was looking for broken strands..looks fine. After you diesel/oil the cable..it will bleed rust for a time..so dont park it on concrete, or where you cant get a pressure washer on it. Gunner Gunner, thanks in general, but when seen in person, you can see that the wire rope is rusted bad. I already bought replacement wire rope, I will oil it generously. I oiled wire rope on the winch of the semi trailer 6 months ago and it does not rust at all. I am just deciding between way oil and used hydraulic oil. http://www.machinerylubrication.com/...pe-lubrication May we ask what you paid per foot? $1.67 Not too bad. Buy a spool or just the length you needed? -- My desire to be well-informed is currently at odds with my desire to remain sane. --Sipkess |
#73
Posted to rec.crafts.metalworking
|
|||
|
|||
Does this wire rope need to be replaced?
On 2015-07-20, Larry Jaques wrote:
On Sun, 19 Jul 2015 16:01:58 -0500, Ignoramus22127 wrote: On 2015-07-19, Larry Jaques wrote: On Sat, 18 Jul 2015 23:25:25 -0500, Ignoramus3944 wrote: On 2015-07-18, Gunner Asch wrote: On Thu, 16 Jul 2015 08:40:29 -0500, Ignoramus23196 wrote: I just bought this Grove crane: http://igor.chudov.com/tmp/Grove-Crane/ It does work, in general. I am concerned that the wire rope on it is too rusted and may need to be replaced. I have a couple of pictures on that webpage above and I wanted to see what you think, whether that wire rope is no longer safe to use. I have a feeeling that it may be so. i NICE crane!! As for the cable...get yourself 10 gallons of diesel fuel, add about a gallon of cheap 10-30 weight oil..and a bug sprayer or big floppy paintbrush and wet down the cable on the drum. Raise the boom as far as it will go and unspool as much cable as you can and keep "painting" the cable with the diesel and oil until you cant let anymore out, then soak whatever is still on the spool ..then roller her back up and you should be good to go for a while. I looked at the photos and the cable looks pretty good. That surface rust isnt much..I was looking for broken strands..looks fine. After you diesel/oil the cable..it will bleed rust for a time..so dont park it on concrete, or where you cant get a pressure washer on it. Gunner Gunner, thanks in general, but when seen in person, you can see that the wire rope is rusted bad. I already bought replacement wire rope, I will oil it generously. I oiled wire rope on the winch of the semi trailer 6 months ago and it does not rust at all. I am just deciding between way oil and used hydraulic oil. http://www.machinerylubrication.com/...pe-lubrication May we ask what you paid per foot? $1.67 Not too bad. Buy a spool or just the length you needed? Just the length I needed, plus extra 2 feet. i |
#74
Posted to rec.crafts.metalworking
|
|||
|
|||
Does this wire rope need to be replaced?
On Sunday, July 19, 2015 at 12:26:04 AM UTC-4, Ignoramus3944 wrote:
It cannot be used for wire rope slings, I think. as it is so soft and flexible. Retired elevator wire rope is commonly woven into blasting mats. We see them all the time around here when they're blasting for new McMansions on the cliffs. |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
wire rope fittings? | UK diy | |||
Wire rope Q | Metalworking | |||
el wire rope lighting electroluminescent FLEXIBLE NEON WIRE (KPT SERIES) | Home Repair | |||
el wire rope lighting electroluminescent FLEXIBLE NEON WIRE (KPT SERIES) | Home Repair | |||
Wire rope question | Home Repair |