|
lathe for sale
|
lathe for sale
On Tue, 05 May 2015 20:44:03 -0500, Ignoramus29072
wrote: https://www.proxibid.com/asp/LotDeta...E-MODEL-TUG-40 lo9cated in il, 18" swing you stole that one. |
lathe for sale
On 2015-05-07, Karl Townsend wrote:
On Tue, 05 May 2015 20:44:03 -0500, Ignoramus29072 wrote: https://www.proxibid.com/asp/LotDeta...E-MODEL-TUG-40 lo9cated in il, 18" swing you stole that one. Thanks. I kind of hoped that you would notice. For my own shop, I already have a "like new" -- believe it or not -- Monarch AA. No wear on that one whatsoever. So, the above mentioned lathe, I would sell. i |
lathe for sale
On 2015-05-07, BQ340 wrote:
On 5/7/2015 6:46 PM, Ignoramus18857 wrote: On 2015-05-07, Karl Townsend wrote: On Tue, 05 May 2015 20:44:03 -0500, Ignoramus29072 wrote: https://www.proxibid.com/asp/LotDeta...E-MODEL-TUG-40 lo9cated in il, 18" swing you stole that one. Thanks. I kind of hoped that you would notice. For my own shop, I already have a "like new" -- believe it or not -- Monarch AA. No wear on that one whatsoever. So, the above mentioned lathe, I would sell. i Do you have any good benchtop lathes for sale? Maybe 24 to 36 inch bed? I have three Hardinge turret lathes from the same auction https://www.proxibid.com/asp/LotDeta...P-LATHE-30-BED https://www.proxibid.com/asp/LotDeta...P-LATHE-28-BED https://www.proxibid.com/asp/LotDeta...P-LATHE-30-BED i |
lathe for sale
On Tue, 05 May 2015 20:44:03 -0500, Ignoramus29072
wrote: https://www.proxibid.com/asp/LotDeta...E-MODEL-TUG-40 Slovac or Chinese? Gunner --- This email has been checked for viruses by Avast antivirus software. http://www.avast.com |
lathe for sale
On Thu, 07 May 2015 20:05:42 -0500, Ignoramus18857
wrote: On 2015-05-07, BQ340 wrote: On 5/7/2015 6:46 PM, Ignoramus18857 wrote: On 2015-05-07, Karl Townsend wrote: On Tue, 05 May 2015 20:44:03 -0500, Ignoramus29072 wrote: https://www.proxibid.com/asp/LotDeta...E-MODEL-TUG-40 lo9cated in il, 18" swing you stole that one. Thanks. I kind of hoped that you would notice. For my own shop, I already have a "like new" -- believe it or not -- Monarch AA. No wear on that one whatsoever. So, the above mentioned lathe, I would sell. i Do you have any good benchtop lathes for sale? Maybe 24 to 36 inch bed? I have three Hardinge turret lathes from the same auction First one is a Hardinge HC https://www.proxibid.com/asp/LotDeta...P-LATHE-30-BED Hardinge DV-59/DSM-59 or a slightly earlier model. Turret setup is a bit strange. It could..could be an Elgin version https://www.proxibid.com/asp/LotDeta...P-LATHE-28-BED Thats the oldest HC Ive ever seen. It may be the Cataract model prior to the HC. Speed control is missing from the door..so its probably a single speed lathe. Not a big deal..easily fixed with a VFD. https://www.proxibid.com/asp/LotDeta...P-LATHE-30-BED Iggy..you run across a matching pair of tool holder blocks (short and tall) for the cross slide on a DSM/DV-59 Id be interested. Ive got a Victor copy of that lathe that I need the two cross slide tool holders blocks (and a pair of tool holders..) Pretty is NOT a requirement. I want to be able to use more than just the turret. Id consider swapping for them. Headstock mounted cutoff tool interest you? ) I may... have a spare. I also have a DSC compound/cross slide or..several minty Gunner, machine tool service tech, with several Hardinge machines in his shop.. i --- This email has been checked for viruses by Avast antivirus software. http://www.avast.com |
lathe for sale
On 2015-05-09, Gunner Asch wrote:
On Tue, 05 May 2015 20:44:03 -0500, Ignoramus29072 wrote: https://www.proxibid.com/asp/LotDeta...E-MODEL-TUG-40 Slovac or Chinese? I thought that Toolmex was Polish? http://igor.chudov.com/manuals/toolm...w-brochure.pdf i |
lathe for sale
On 2015-05-09, Gunner Asch wrote:
On Thu, 07 May 2015 20:05:42 -0500, Ignoramus18857 wrote: On 2015-05-07, BQ340 wrote: On 5/7/2015 6:46 PM, Ignoramus18857 wrote: On 2015-05-07, Karl Townsend wrote: On Tue, 05 May 2015 20:44:03 -0500, Ignoramus29072 wrote: https://www.proxibid.com/asp/LotDeta...E-MODEL-TUG-40 lo9cated in il, 18" swing you stole that one. Thanks. I kind of hoped that you would notice. For my own shop, I already have a "like new" -- believe it or not -- Monarch AA. No wear on that one whatsoever. So, the above mentioned lathe, I would sell. i Do you have any good benchtop lathes for sale? Maybe 24 to 36 inch bed? I have three Hardinge turret lathes from the same auction First one is a Hardinge HC https://www.proxibid.com/asp/LotDeta...P-LATHE-30-BED thought so Hardinge DV-59/DSM-59 or a slightly earlier model. Turret setup is a bit strange. It could..could be an Elgin version https://www.proxibid.com/asp/LotDeta...P-LATHE-28-BED It says Hardinge though Thats the oldest HC Ive ever seen. It may be the Cataract model prior to the HC. Speed control is missing from the door..so its probably a single speed lathe. Not a big deal..easily fixed with a VFD. https://www.proxibid.com/asp/LotDeta...P-LATHE-30-BED I sold a cataract turret recently and still have a cataract bed, they are very much smaller than on this lathe. Iggy..you run across a matching pair of tool holder blocks (short and tall) for the cross slide on a DSM/DV-59 Id be interested. Ive got a Victor copy of that lathe that I need the two cross slide tool holders blocks (and a pair of tool holders..) Pretty is NOT a requirement. I want to be able to use more than just the turret. Id consider swapping for them. Headstock mounted cutoff tool interest you? ) I may... have a spare. Do you have a picture of how they should look? I also have a DSC compound/cross slide or..several minty Gunner, machine tool service tech, with several Hardinge machines in his shop.. I love that old **** myself. My heart aches the most, though, for jig borers. I just bought a Moore jig borer for $100. For some reason they mounted it upside down bolted to a ceiling: http://goo.gl/qgA8gB Finding a buyer for it will be very difficult. Three weeks ago I bought a P&W no. 2A jig borer for $50: http://goo.gl/hW7YVX Already stripped that one out for parts i |
lathe for sale
On Sat, 09 May 2015 11:07:20 -0500, Ignoramus25965
wrote: On 2015-05-09, Gunner Asch wrote: On Tue, 05 May 2015 20:44:03 -0500, Ignoramus29072 wrote: https://www.proxibid.com/asp/LotDeta...E-MODEL-TUG-40 Slovac or Chinese? I thought that Toolmex was Polish? http://igor.chudov.com/manuals/toolm...w-brochure.pdf i Toolmex is an importer, not a manufacturer. But I believe most of what they handle is eastern European. I'm currently working on tooling for a Toolmex lathe that a customer has on order. Pretty sure this is it: http://www.toolmex.com/cb-Machines/tur630amn.aspx -- Ned Simmons |
lathe for sale
On 2015-05-09, Ned Simmons wrote:
On Sat, 09 May 2015 11:07:20 -0500, Ignoramus25965 wrote: On 2015-05-09, Gunner Asch wrote: On Tue, 05 May 2015 20:44:03 -0500, Ignoramus29072 wrote: https://www.proxibid.com/asp/LotDeta...E-MODEL-TUG-40 Slovac or Chinese? I thought that Toolmex was Polish? http://igor.chudov.com/manuals/toolm...w-brochure.pdf i Toolmex is an importer, not a manufacturer. But I believe most of what they handle is eastern European. I'm currently working on tooling for a Toolmex lathe that a customer has on order. Pretty sure this is it: http://www.toolmex.com/cb-Machines/tur630amn.aspx Maybe even made in Belarus, I know that they have a strong machine building factory there. I am surprised, though, that the above model only weight 13,000 lbs. i |
lathe for sale
On Sat, 09 May 2015 11:17:02 -0500, Ignoramus25965
wrote: Iggy..you run across a matching pair of tool holder blocks (short and tall) for the cross slide on a DSM/DV-59 Id be interested. Ive got a Victor copy of that lathe that I need the two cross slide tool holders blocks (and a pair of tool holders..) Pretty is NOT a requirement. I want to be able to use more than just the turret. Id consider swapping for them. Headstock mounted cutoff tool interest you? ) I may... have a spare. Do you have a picture of how they should look? http://www.lathes.co.uk/hardinge3/ I have the cross slide. I only have (1) block..which the tool holders mount on (as seen in the photos) Normally one block (which bolts to the cross slide ) is .3" higher than the other one. Tool holders are "usually" the same height. This is because the back tool bit is mounted upside down Need better pics..I can probably find some Gunner --- This email has been checked for viruses by Avast antivirus software. http://www.avast.com |
lathe for sale
On Sat, 09 May 2015 11:07:20 -0500, Ignoramus25965
wrote: On 2015-05-09, Gunner Asch wrote: On Tue, 05 May 2015 20:44:03 -0500, Ignoramus29072 wrote: https://www.proxibid.com/asp/LotDeta...E-MODEL-TUG-40 Slovac or Chinese? I thought that Toolmex was Polish? http://igor.chudov.com/manuals/toolm...w-brochure.pdf i If its Polish..its very good machine. Same with Slovac (which I tend to classify with Polish) Gunner --- This email has been checked for viruses by Avast antivirus software. http://www.avast.com |
lathe for sale
On 2015-05-09, Gunner Asch wrote:
On Sat, 09 May 2015 11:17:02 -0500, Ignoramus25965 wrote: Iggy..you run across a matching pair of tool holder blocks (short and tall) for the cross slide on a DSM/DV-59 Id be interested. Ive got a Victor copy of that lathe that I need the two cross slide tool holders blocks (and a pair of tool holders..) Pretty is NOT a requirement. I want to be able to use more than just the turret. Id consider swapping for them. Headstock mounted cutoff tool interest you? ) I may... have a spare. Do you have a picture of how they should look? http://www.lathes.co.uk/hardinge3/ I have the cross slide. I only have (1) block..which the tool holders mount on (as seen in the photos) Normally one block (which bolts to the cross slide ) is .3" higher than the other one. Tool holders are "usually" the same height. This is because the back tool bit is mounted upside down Need better pics..I can probably find some I think that I udnerstand. I do not have one at the moment, but I will look. i Gunner --- This email has been checked for viruses by Avast antivirus software. http://www.avast.com |
lathe for sale
On 2015-05-09, Gunner Asch wrote:
On Sat, 09 May 2015 11:07:20 -0500, Ignoramus25965 wrote: On 2015-05-09, Gunner Asch wrote: On Tue, 05 May 2015 20:44:03 -0500, Ignoramus29072 wrote: https://www.proxibid.com/asp/LotDeta...E-MODEL-TUG-40 Slovac or Chinese? I thought that Toolmex was Polish? http://igor.chudov.com/manuals/toolm...w-brochure.pdf i If its Polish..its very good machine. Same with Slovac (which I tend to classify with Polish) I would really love to have my first lathe that I used in high school, a Russian 16k20. It was a very massive lathe for its size. i |
lathe for sale
On Sat, 09 May 2015 14:23:02 -0500, Ignoramus25965
wrote: On 2015-05-09, Ned Simmons wrote: On Sat, 09 May 2015 11:07:20 -0500, Ignoramus25965 wrote: On 2015-05-09, Gunner Asch wrote: On Tue, 05 May 2015 20:44:03 -0500, Ignoramus29072 wrote: https://www.proxibid.com/asp/LotDeta...E-MODEL-TUG-40 Slovac or Chinese? I thought that Toolmex was Polish? http://igor.chudov.com/manuals/toolm...w-brochure.pdf i Toolmex is an importer, not a manufacturer. But I believe most of what they handle is eastern European. I'm currently working on tooling for a Toolmex lathe that a customer has on order. Pretty sure this is it: http://www.toolmex.com/cb-Machines/tur630amn.aspx Maybe even made in Belarus, I know that they have a strong machine building factory there. I am surprised, though, that the above model only weight 13,000 lbs. i Yeah, I noticed that, too. -- Ned Simmons |
| All times are GMT +1. The time now is 10:35 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter