Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 3,797
Default Roadster upgrade will enable non-stop travel from LA to SF --almost 400 mile range.

On Saturday, December 27, 2014 4:20:55 PM UTC-8, jon_banquer wrote:
http://www.teslamotors.com/blog/roadster-30

"The Roadster 3.0 package applies what we've learned in Model S to Roadster. No new Model S battery pack or major range upgrade is expected in the near term.

Battery technology has continued a steady improvement in recent years, as has our experience in optimizing total vehicle efficiency through Model S development. We have long been excited to apply our learning back to our first vehicle, and are thrilled to do just that with the prototype Roadster 3..0 package. It consists of three main improvement areas.

1. Batteries
The original Roadster battery was the very first lithium ion battery put into production in any vehicle. It was state of the art in 2008, but cell technology has improved substantially since then. We have identified a new cell that has 31% more energy than the original Roadster cell. Using this new cell we have created a battery pack that delivers roughly 70kWh in the same package as the original battery.

2. Aerodynamics
The original Roadster had a drag coefficient (Cd) of 0.36. Using modern computational methods we expect to make a 15% improvement, dropping the total Cd down to 0.31 with a retrofit aero kit.

3. Rolling Resistance
The original Roadster tires have a rolling resistance coefficient (Crr) of 11.0 kg/ton. New tires that we will use on the Roadster 3.0 have a Crr of roughly 8.9 kg/ton, about a 20% improvement. We are also making improvements in the wheel bearings and residual brake drag that further reduce overall rolling resistance of the car.

Summary
Combining all of these improvements we can achieve a predicted 40-50% improvement on range between the original Roadster and Roadster 3.0. There is a set of speeds and driving conditions where we can confidently drive the Roadster 3.0 over 400 miles. We will be demonstrating this in the real world during a non-stop drive from San Francisco to Los Angeles in the early weeks of 2015.

Appointments for upgrading Roadsters will be taken this spring once the new battery pack finishes safety validation. We are confident that this will not be the last update the Roadster will receive in the many years to come..

Happy Holidays."


Not metalworking but it sure beats Jonathan Ball's political bull****.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Progress on the Roadster JR North Metalworking 16 June 1st 09 06:27 PM
Stan's Sportscars Perfomance Center - Extreme Roadster CWMtrader UK diy 30 February 21st 08 08:32 AM
Stan's Sportscars Perfomance Center - Extreme Roadster CWMtrader Woodturning 0 February 11th 08 11:25 AM
?? Nova Compac Travel Stop Bill Rubenstein Woodturning 5 October 20th 04 11:35 AM
Range Hood Replacement/Upgrade Question Lee Home Ownership 2 August 21st 04 12:59 PM


All times are GMT +1. The time now is 05:33 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"