Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
The Reality Of How BobCADCAM Does Business
|
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
The Reality Of How BobCADCAM Does Business
Am Donnerstag, 26. Juni 2014 20:41:33 UTC+2 schrieb jon_banquer:
http://www.scribd.com/doc/45645061/C...ses-on-the-Job First of all, this case is from five years ago, and it's seemingly the only one. I don't know about the Scientology connection. I would likely not have purchased V26 had I known about it, but don't see convincing evidence for this anyway. As for usefulness, I used v16 in the late '90s with a Bridgeport machine. It wasn't fancy, but it mostly got the job done, and was like $200. I now have layed out $1K for v26 + BobArt. I've yet to attach a machine and create toolpaths, but on the drawing side I find it acceptable. Yes, if there is a scientology and sexual harassment component, then beware. But, how many of you out there tank with oil from BP or Exxon? Is there a list of CadCam companies which rates them as to workplace fairness? How do you know that SolidPro exec's aren't banging secretaries on promises of promotions? |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
The Reality Of How BobCADCAM Does Business
On Monday, June 30, 2014 4:57:18 AM UTC-7, robobass wrote:
"I don't know about the Scientology connection." Here you go: http://www.truthaboutscientology.com...aalfhoven.html http://www.truthaboutscientology.com...pendleton.html http://www.truthaboutscientology.com...pendleton.html |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
The Reality Of How BobCADCAM Does Business
I clicked on the first link and saw nothing. Please clue me in.
|
#5
Posted to rec.crafts.metalworking
|
|||
|
|||
The Reality Of How BobCADCAM Does Business
On Monday, June 30, 2014 8:25:44 AM UTC-7, robobass wrote:
I clicked on the first link and saw nothing. Please clue me in. All the links work fine. They show that BobCADCAM's owners are very heavily involved with Scientology. |
#6
Posted to rec.crafts.metalworking
|
|||
|
|||
The Reality Of How BobCADCAM Does Business
On Mon, 30 Jun 2014 08:25:44 -0700 (PDT), robobass
wrote: I clicked on the first link and saw nothing. Please clue me in. The link likely went directly inside Banquer's head. 'Nuff said? Plonk him and forget him. -- You can ignore reality, but you cannot ignore the consequences of ignoring reality. --Ayn Rand |
#7
Posted to rec.crafts.metalworking
|
|||
|
|||
The Reality Of How BobCADCAM Does Business
On Monday, June 30, 2014 6:51:43 PM UTC-7, Larry Jaques wrote:
On Mon, 30 Jun 2014 08:25:44 -0700 (PDT), robobass wrote: I clicked on the first link and saw nothing. Please clue me in. The link likely went directly inside Banquer's head. 'Nuff said? Plonk him and forget him. -- You can ignore reality, but you cannot ignore the consequences of ignoring reality. --Ayn Rand Larry Jackass continues to think that mature adults need to be told what to do. **** Larry Jackass who is the president of the Mark Wieber clique of idiots fan club. |
#8
Posted to rec.crafts.metalworking
|
|||
|
|||
The Reality Of How BobCADCAM Does Business
On 01-Jul-14 9:51 AM, Larry Jaques wrote:
On Mon, 30 Jun 2014 08:25:44 -0700 (PDT), robobass wrote: I clicked on the first link and saw nothing. Please clue me in. The link likely went directly inside Banquer's head. 'Nuff said? Plonk him and forget him. -- You can ignore reality, but you cannot ignore the consequences of ignoring reality. --Ayn Rand Bugger - I'd almost forgotten about that tosser. I agree, just plonk him. |
#9
Posted to rec.crafts.metalworking
|
|||
|
|||
The Reality Of How BobCADCAM Does Business
On Monday, June 30, 2014 8:14:26 PM UTC-7, DTJ wrote:
On 01-Jul-14 9:51 AM, Larry Jaques wrote: On Mon, 30 Jun 2014 08:25:44 -0700 (PDT), robobass wrote: I clicked on the first link and saw nothing. Please clue me in. The link likely went directly inside Banquer's head. 'Nuff said? Plonk him and forget him. -- You can ignore reality, but you cannot ignore the consequences of ignoring reality. --Ayn Rand Bugger - I'd almost forgotten about that tosser. I agree, just plonk him. You read everything I post, bitch. Now **** off and die. |
#10
Posted to rec.crafts.metalworking
|
|||
|
|||
The Reality Of How BobCADCAM Does Business
On Thursday, June 26, 2014 11:41:33 AM UTC-7, jon_banquer wrote:
http://www.scribd.com/doc/45645061/C...ses-on-the-Job Looks like I really hit a nerve with all the Mark Wieber clique of idiot losers who more than likely overpaid for BobCADCAM. |
#11
Posted to rec.crafts.metalworking
|
|||
|
|||
The Reality Of How BobCADCAM Does Business
Larry Jaques fired this volley in
: The link likely went directly inside Banquer's head. 'Nuff said? Plonk him and forget him. Is that s-for-brains mal-adjusted little queer STILL posting here? I thought _everyone_ had plonked his malicious little ass. Lloyd |
#12
Posted to rec.crafts.metalworking
|
|||
|
|||
The Reality Of How BobCADCAM Does Business
On Tuesday, July 1, 2014 3:40:05 AM UTC-7, Lloyd E. Sponenburgh wrote:
Larry Jaques fired this volley in : The link likely went directly inside Banquer's head. 'Nuff said? Plonk him and forget him. Is that s-for-brains mal-adjusted little queer STILL posting here? I thought _everyone_ had plonked his malicious little ass. Lloyd You don't think, Loud. Thanks for proving it... again. |
#13
Posted to rec.crafts.metalworking
|
|||
|
|||
The Reality Of How BobCADCAM Does Business
On Tue, 01 Jul 2014 05:40:05 -0500, "Lloyd E. Sponenburgh"
lloydspinsidemindspring.com wrote: Larry Jaques fired this volley in : The link likely went directly inside Banquer's head. 'Nuff said? Plonk him and forget him. Is that s-for-brains mal-adjusted little queer STILL posting here? I thought _everyone_ had plonked his malicious little ass. C'mon, Lloyd. You _yourself_ haven't plonked nearly enough of them and continue dialog with 1 or 2 of the little twits. sigh -- You can ignore reality, but you cannot ignore the consequences of ignoring reality. --Ayn Rand |
#14
Posted to rec.crafts.metalworking
|
|||
|
|||
The Reality Of How BobCADCAM Does Business
Larry Jaques fired this volley in
: C'mon, Lloyd. You _yourself_ haven't plonked nearly enough of them and continue dialog with 1 or 2 of the little twits. sigh Some of them might be irritating, but none of them were as deliberatly malicious as 'it' was. I can put up with stupidity. Meanness should be shot in the head, and left to rot on the street as an example. Lloyd |
#15
Posted to rec.crafts.metalworking
|
|||
|
|||
The Reality Of How BobCADCAM Does Business
On Wednesday, July 2, 2014 4:57:34 AM UTC-7, Larry Jaques wrote:
On Tue, 01 Jul 2014 05:40:05 -0500, "Lloyd E. Sponenburgh" lloydspinsidemindspring.com wrote: Larry Jaques fired this volley in : The link likely went directly inside Banquer's head. 'Nuff said? Plonk him and forget him. Is that s-for-brains mal-adjusted little queer STILL posting here? I thought _everyone_ had plonked his malicious little ass. C'mon, Lloyd. You _yourself_ haven't plonked nearly enough of them and continue dialog with 1 or 2 of the little twits. sigh -- You can ignore reality, but you cannot ignore the consequences of ignoring reality. --Ayn Rand Think it's time you two get a room. |
#16
Posted to rec.crafts.metalworking
|
|||
|
|||
The Reality Of How BobCADCAM Does Business
On Wednesday, July 2, 2014 5:09:43 AM UTC-7, Lloyd E. Sponenburgh wrote:
Larry Jaques fired this volley in : C'mon, Lloyd. You _yourself_ haven't plonked nearly enough of them and continue dialog with 1 or 2 of the little twits. sigh Some of them might be irritating, but none of them were as deliberatly malicious as 'it' was. I can put up with stupidity. Meanness should be shot in the head, and left to rot on the street as an example. Lloyd I get it. You put up with yourself and plan on shooting yourself in the head in traffic. Wouldn't it be better start learning again and pick up where you stopped many years ago? |
#17
Posted to rec.crafts.metalworking
|
|||
|
|||
The Reality Of How BobCADCAM Does Business
On Wednesday, July 2, 2014 4:57:34 AM UTC-7, Larry Jaques wrote:
On Tue, 01 Jul 2014 05:40:05 -0500, "Lloyd E. Sponenburgh" lloydspinsidemindspring.com wrote: Larry Jaques fired this volley in : The link likely went directly inside Banquer's head. 'Nuff said? Plonk him and forget him. Is that s-for-brains mal-adjusted little queer STILL posting here? I thought _everyone_ had plonked his malicious little ass. C'mon, Lloyd. You _yourself_ haven't plonked nearly enough of them and continue dialog with 1 or 2 of the little twits. sigh -- You can ignore reality, but you cannot ignore the consequences of ignoring reality. --Ayn Rand It's very difficult to learn anything from Larry Jackass because he doesn't know jack **** about machining and his posts to this newsgroup prove that over and over again. Larry Jackass spends his time on his knees blowing Mark Wieber and the rest of Wieber's cult of idiots because it's much easier than putting in the work to actually learn machining. |
#18
Posted to rec.crafts.metalworking
|
|||
|
|||
The Reality Of How BobCADCAM Does Business
On Wednesday, July 2, 2014 12:56:27 PM UTC-4, jon_banquer wrote:
On Wednesday, July 2, 2014 5:09:43 AM UTC-7, Lloyd E. Sponenburgh wrote: Larry Jaques fired this volley in : C'mon, Lloyd. You _yourself_ haven't plonked nearly enough of them and continue dialog with 1 or 2 of the little twits. sigh Some of them might be irritating, but none of them were as deliberatly malicious as 'it' was. I can put up with stupidity. Meanness should be shot in the head, and left to rot on the street as an example. I get it. You put up with yourself and plan on shooting yourself in the head in traffic. Wouldn't it be better start learning again and pick up where you stopped many years ago? (Sigh) Jon, its great that somehow, you are actually still encouraging the folks on this board. But a lot of other people just choose to leave. |
#19
Posted to rec.crafts.metalworking
|
|||
|
|||
The Reality Of How BobCADCAM Does Business
On Wednesday, July 2, 2014 12:03:30 PM UTC-7, wrote:
On Wednesday, July 2, 2014 12:56:27 PM UTC-4, jon_banquer wrote: On Wednesday, July 2, 2014 5:09:43 AM UTC-7, Lloyd E. Sponenburgh wrote: Larry Jaques fired this volley in : C'mon, Lloyd. You _yourself_ haven't plonked nearly enough of them and continue dialog with 1 or 2 of the little twits. sigh Some of them might be irritating, but none of them were as deliberatly malicious as 'it' was. I can put up with stupidity. Meanness should be shot in the head, and left to rot on the street as an example. I get it. You put up with yourself and plan on shooting yourself in the head in traffic. Wouldn't it be better start learning again and pick up where you stopped many years ago? (Sigh) Jon, its great that somehow, you are actually still encouraging the folks on this board. But a lot of other people just choose to leave. What's left of this newsgroup is mostly a clique of idiots who worship people like Ayn Rand, love the Tea Party and support Michele Bachmann, Darrell Issa, etc. Their hope is to completely exterminate and isolate anyone from this group who identifies with liberal causes, likes a self proclaimed socialist like Bernie Sanders, etc. https://twitter.com/140elect/status/...342977/photo/1 |
#20
Posted to rec.crafts.metalworking
|
|||
|
|||
The Reality Of How BobCADCAM Does Business
On Wednesday, July 2, 2014 4:07:46 PM UTC-4, jon_banquer wrote:
On Wednesday, July 2, 2014 12:03:30 PM UTC-7, wrote: On Wednesday, July 2, 2014 12:56:27 PM UTC-4, jon_banquer wrote: On Wednesday, July 2, 2014 5:09:43 AM UTC-7, Lloyd E. Sponenburgh wrote: Larry Jaques fired this volley in : C'mon, Lloyd. You _yourself_ haven't plonked nearly enough of them and continue dialog with 1 or 2 of the little twits. sigh Some of them might be irritating, but none of them were as deliberatly malicious as 'it' was. I can put up with stupidity. Meanness should be shot in the head, and left to rot on the street as an example. I get it. You put up with yourself and plan on shooting yourself in the head in traffic. (Sigh) Jon, its great that somehow, you are actually still encouraging the folks on this board. But a lot of other people just choose to leave. What's left of this newsgroup is mostly a clique of idiots who worship people like Ayn Rand, love the Tea Party and support Michele Bachmann, These tea party quotes are among the most breathtaking and TOTALLY heart-stopping that I've ever seen: -- "If English was good enough for Jesus when he wrote the Bible it should be good enough for Coke," Michele Bachmann is quoted as saying on Fox News (says, "Top 10 upcoming Michele Bachmann gaffes", The Wacky Deli, 5 October 2011 - misattributed?) -- "Republican presidential candidate Michele Bachmann slipped up Monday and nearly referred to herself as "President O'Bachmann'" (says, crooksandliars.com) -- Michele Bachmann (R-Minn.) is bringing the tea party movement under the tent, giving it a more official voice in the House of Representatives. (says, politico) Darrell Issa, etc. He may have burned down a warehouse and used car thefts to collect insurance money. Also weapons charges. -- http://www.newyorker.com/reporting/2...urrentPage=all Their hope is to completely exterminate and isolate anyone from this group who identifies with liberal causes, likes a self proclaimed socialist like Bernie Sanders, etc. Haha, no fear. People in this group are before the computer-age. They're from the stone-age. That's the only thing they worship. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|