water filter/housing
 

I know this sounds crazy but I am wanting to experiment with a filter and housing to use attached to my spigot outside my pole barn garage. The purpose would be to wash my cars so there are no water spots and no need to dry them. I have three vehicles and it takes alot of time to wash them. Also, drying over time can leave spider web scratches if you are not extremely careful.

Is there a filter or housing you recommend? Is it possible to mount a filter housing outside even in freezing weather?

water filter/housing
 

On 18/09/2013 8:52 PM, stryped wrote:
I know this sounds crazy but I am wanting to experiment with a filter and housing to use attached to my spigot outside my pole barn garage. The purpose would be to wash my cars so there are no water spots and no need to dry them. I have three vehicles and it takes alot of time to wash them. Also, drying over time can leave spider web scratches if you are not extremely careful.

Is there a filter or housing you recommend? Is it possible to mount a filter housing outside even in freezing weather?


Will a filter help?

Are some marks not left by dissolved salts?

water filter/housing
 

On 9/18/2013 8:29 AM, Anderson wrote:
On 18/09/2013 8:52 PM, stryped wrote:
I know this sounds crazy but I am wanting to experiment with a filter
and housing to use attached to my spigot outside my pole barn garage.
The purpose would be to wash my cars so there are no water spots and
no need to dry them. I have three vehicles and it takes alot of time
to wash them. Also, drying over time can leave spider web scratches if
you are not extremely careful.

Is there a filter or housing you recommend? Is it possible to mount a
filter housing outside even in freezing weather?


Will a filter help?

Highly unlikely...because

Are some marks not left by dissolved salts?

Yes, and most of OPs problems are almost certainly caused therefrom...

OP. Try some vinegar in the rinse water...

--

water filter/housing
 

On Wed, 18 Sep 2013 21:29:28 +0800, Anderson wrote:

On 18/09/2013 8:52 PM, stryped wrote:
I know this sounds crazy but I am wanting to experiment with a filter and housing to use attached to my spigot outside my pole barn garage. The purpose would be to wash my cars so there are no water spots and no need to dry them. I have three vehicles and it takes alot of time to wash them. Also, drying over time can leave spider web scratches if you are not extremely careful.

Is there a filter or housing you recommend? Is it possible to mount a filter housing outside even in freezing weather?


Will a filter help?

Are some marks not left by dissolved salts?

PDFTFT.

--
Try not to become a man of success but
rather try to become a man of value.
--Albert Einstein

water filter/housing
 

On Wed, 18 Sep 2013 05:52:52 -0700 (PDT), stryped
wrote:

I know this sounds crazy but I am wanting to experiment with a filter and housing to use attached to my spigot outside my pole barn garage. The purpose would be to wash my cars so there are no water spots and no need to dry them. I have three vehicles and it takes alot of time to wash them. Also, drying over time can leave spider web scratches if you are not extremely careful.

Is there a filter or housing you recommend? Is it possible to mount a filter housing outside even in freezing weather?

Is your water...hard or soft?

Thats the #1 question you should be asking someone before doing
anything else.

Gunner

"The socialist movement takes great pains to circulate frequently new labels for its ideally constructed state.
Each worn-out label is replaced by another which raises hopes of an ultimate solution of the insoluble basic
problem of Socialism, until it becomes obvious that nothing has been changed but the name.
The most recent slogan is "State Capitalism."[Fascism] It is not commonly realized that this covers nothing more
than what used to be called Planned Economy and State Socialism, and that State Capitalism, Planned Economy,
and State Socialism diverge only in non-essentials from the "classic" ideal of egalitarian Socialism. - Ludwig von Mises (1922)

water filter/housing
 

On Wednesday, September 18, 2013 10:07:42 AM UTC-5, Gunner Asch wrote:
On Wed, 18 Sep 2013 05:52:52 -0700 (PDT), stryped

wrote:



I know this sounds crazy but I am wanting to experiment with a filter and housing to use attached to my spigot outside my pole barn garage. The purpose would be to wash my cars so there are no water spots and no need to dry them. I have three vehicles and it takes alot of time to wash them. Also, drying over time can leave spider web scratches if you are not extremely careful.

This is what my water company says: Water with less than 4 grains per gallon is considered to be ‘soft,’ anything between 4 and 7 is considered ‘medium-hard,’ and anything beyond 7 grains per gallon is considered ‘hard.’ Simpson's water has an average hardness of 4.8 grains.


Is there a filter or housing you recommend? Is it possible to mount a filter housing outside even in freezing weather?



Is your water...hard or soft?



Thats the #1 question you should be asking someone before doing

anything else.



Gunner



"The socialist movement takes great pains to circulate frequently new labels for its ideally constructed state.

Each worn-out label is replaced by another which raises hopes of an ultimate solution of the insoluble basic

problem of Socialism, until it becomes obvious that nothing has been changed but the name.

The most recent slogan is "State Capitalism."[Fascism] It is not commonly realized that this covers nothing more

than what used to be called Planned Economy and State Socialism, and that State Capitalism, Planned Economy,

and State Socialism diverge only in non-essentials from the "classic" ideal of egalitarian Socialism. - Ludwig von Mises (1922)

water filter/housing
 

On 18/09/2013 10:31 PM, Larry Jaques wrote:
On Wed, 18 Sep 2013 21:29:28 +0800, Anderson wrote:

On 18/09/2013 8:52 PM, stryped wrote:
I know this sounds crazy but I am wanting to experiment with a filter and housing to use attached to my spigot outside my pole barn garage. The purpose would be to wash my cars so there are no water spots and no need to dry them. I have three vehicles and it takes alot of time to wash them. Also, drying over time can leave spider web scratches if you are not extremely careful.

Is there a filter or housing you recommend? Is it possible to mount a filter housing outside even in freezing weather?


Will a filter help?

Are some marks not left by dissolved salts?

PDFTFT.

--
Try not to become a man of success but
rather try to become a man of value.
--Albert Einstein



It took me a minute to work out PDFTFT........yeah, I did reply with
some hesitancy.

He is an unusual "unit".

water filter/housing
 

On 9/18/2013 8:52 AM, stryped wrote:
I know this sounds crazy but I am wanting to experiment with a filter and housing to use attached to my spigot outside my pole barn garage. The purpose would be to wash my cars so there are no water spots and no need to dry them. I have three vehicles and it takes alot of time to wash them. Also, drying over time can leave spider web scratches if you are not extremely careful.

Is there a filter or housing you recommend? Is it possible to mount a filter housing outside even in freezing weather?


Rinse agent?

water filter/housing
 

On Wednesday, September 18, 2013 10:27:26 PM UTC-5, Tom Gardner wrote:
On 9/18/2013 8:52 AM, stryped wrote:

I know this sounds crazy but I am wanting to experiment with a filter and housing to use attached to my spigot outside my pole barn garage. The purpose would be to wash my cars so there are no water spots and no need to dry them. I have three vehicles and it takes alot of time to wash them. Also, drying over time can leave spider web scratches if you are not extremely careful.

What do you mean by rinse agent?

Is there a filter or housing you recommend? Is it possible to mount a filter housing outside even in freezing weather?





Rinse agent?

hey all can you please tell me that why won't the water dispenser stop leaking from the filter housing on my frigidaire refrigerator?

Automatic Doors Manufacturers

water filter/housing
 

On 9/19/2013 11:58 AM, stryped wrote:
On Wednesday, September 18, 2013 10:27:26 PM UTC-5, Tom Gardner wrote:
On 9/18/2013 8:52 AM, stryped wrote:

I know this sounds crazy but I am wanting to experiment with a filter and housing to use attached to my spigot outside my pole barn garage. The purpose would be to wash my cars so there are no water spots and no need to dry them. I have three vehicles and it takes alot of time to wash them. Also, drying over time can leave spider web scratches if you are not extremely careful.

What do you mean by rinse agent?

Is there a filter or housing you recommend? Is it possible to mount a filter housing outside even in freezing weather?





Rinse agent?


Just a thought. Cheaper than any filter.

http://www.amazon.com/Cascade-Rinse-.../dp/B003BAN08K

http://frugalliving.about.com/od/hou...inse_Agent.htm

water filter/housing
 

On Wed, 18 Sep 2013 05:52:52 -0700 (PDT), stryped
wrote:

I know this sounds crazy but I am wanting to experiment with a filter and housing to use attached to my spigot outside my pole barn garage. The purpose would be to wash my cars so there are no water spots and no need to dry them. I have three vehicles and it takes alot of time to wash them. Also, drying over time can leave spider web scratches if you are not extremely careful.

Is there a filter or housing you recommend? Is it possible to mount a filter housing outside even in freezing weather?

The Pro Detailing guys that wash cars on new car lots use a double
deionizer system, the two tall bottles on their truck or trailer. One
resin bed attracts positive ions, the other negative, and between the
two it gets pretty much everything out of the water.

You want to run a fine particulate filter before the deionizers, to
keep from loading them up.

Usually get those deionizer bottles as rentals on an exchange basis
from the local Water Softener people. You can buy your own and renew
the resin beds yourself but it's a huge process. Let them deal with
it in bulk.

Since they are fiberglass-wrapped pressure vessels with water inside,
they have to be kept above freezing inside the garage, or you'll need
to rig up heat wraps for the tanks if they are stored outside in
freezing conditions. And pray the power for the heat wraps doesn't go
off and they get wrecked anyway.

No rule saying you can't rig them up semi-permanent inside the Pole
Barn in a nice little heated closet, then put a frost-proof spigot on
the outside. You already have water in the barn, so you know what has
to be done in your area to keep things from freezing.

-- Bruce --