DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Metalworking (https://www.diybanter.com/metalworking/)
-   -   Eye glasses repair. (https://www.diybanter.com/metalworking/355294-eye-glasses-repair.html)

[email protected] April 16th 13 03:41 PM

Eye glasses repair.
 
I accidentally popped one lens out of my glasses frame. This frame
uses a tiny wire to hold the lens into the frame. I asked Zenni
optical for reassembly instructions and they said:

"Take your lens and place it up into the top half of the frame. Hold
this in one hand. Now, take the ribbon/floss and loop it over the
filament wire and hold it between your thumb and fingers. Use it to
pull the wire under the lens and into the groove. once it's seated,
run the ribbon/floss along the groove until you get to the other end
of the lens. Pull it out and the lens should be seated in the frame."

Reassembly finished! : )

Gunner Asch[_6_] April 16th 13 08:29 PM

Eye glasses repair.
 
On Tue, 16 Apr 2013 10:41:24 -0400, wrote:

I accidentally popped one lens out of my glasses frame. This frame
uses a tiny wire to hold the lens into the frame. I asked Zenni
optical for reassembly instructions and they said:

"Take your lens and place it up into the top half of the frame. Hold
this in one hand. Now, take the ribbon/floss and loop it over the
filament wire and hold it between your thumb and fingers. Use it to
pull the wire under the lens and into the groove. once it's seated,
run the ribbon/floss along the groove until you get to the other end
of the lens. Pull it out and the lens should be seated in the frame."

Reassembly finished! : )


Thats like putting in a windshield!!




All times are GMT +1. The time now is 02:54 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter