Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#41
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
On Wed, 2 Jan 2013 17:10:47 -0800 (PST), jon_banquer
wrote: On Jan 2, 4:57*pm, wrote: On Wed, 2 Jan 2013 14:24:01 -0800 (PST), jon_banquer wrote: On Jan 2, 1:05 pm, Ignoramus24272 ignoramus24...@NOSPAM. 24272.invalid wrote: plonk On 2013-01-02, PrecisionmachinisT wrote: "Steve B" wrote in message ... My wife has some honey that her mom put up about ten to fifteen years ago. Some have comb in it. It had started to crystallize. We put it in hot water for a time, and the crystals disappeared. Now, the comb has melted. How do we separate the wax from the honey? I figured there were enough old people here to find someone who knew this. The foodie newsgroups on the Internet are not user friendly unless you are a member of the ruling cabal. My gawd you are stupid. Hey Iggy can you plonk me as well because I think you're a clueless idiot when it comes to machining and always will be because of your approach. I know it's wrong but every time I see your last name I'm reminded of this scene from The Green Hornet movie. The movie pretty much sucked ass except for this scene: http://www.funnyordie.com/videos/681...ornet-scene-wi... Ah well. When I see your posts it comes to mind that you really aren't a metal worker, you are just another computer programmer and about as skilled as the "cobel coders" of yesteryear. It's clear to me you don't have much of a mind and that you have no clues what modern CNC machining is all about. To be a good CADCAM programmer you must be a good machinist. Interesting. Where did you serve your apprenticeship, were you trained to be a machinist or? -- Cheers, John B. |
#42
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
On Wed, 2 Jan 2013 17:14:01 -0800 (PST), jon_banquer
wrote: On Jan 2, 5:00*pm, John B. wrote: On Wed, 2 Jan 2013 14:10:09 -0800 (PST), jon_banquer wrote: On Jan 2, 1:34 pm, whoyakidding's ghost wrote: On Wed, 2 Jan 2013 10:26:22 -0800, "PrecisionmachinisT" wrote: "Steve B" wrote in message ... The foodie newsgroups on the Internet are not user friendly unless you are a member of the ruling cabal. My gawd you are stupid. They're born stupid and they live stupid lives. And then when they're retired and have the time and the technology to finally learn something, they use it instead to get stupider. At least worldnutdaily etc. are grateful for their support. Gunner has a huge fan club made up of stupid people who can't help themselves when it comes to machining or rational thinking. It's very cult like. Thus speaks the computer coder :-( -- Cheers, John B. Thus speaks a machinist / CADCAM programmer. Jon, I've seen you wax loud and long about the virtues of various pieces of software but, you know, I've never seen you advance any opinions or advise about metalworking (the title of this site). I can only assume that you know something about software and nothing about metal working. -- Cheers, John B. |
#43
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
On Wed, 2 Jan 2013 17:45:21 -0800 (PST), jon_banquer
wrote: On Jan 2, 5:39*pm, Ignoramus24272 ignoramus24...@NOSPAM. 24272.invalid wrote: On 2013-01-03, John B wrote: On Wed, 2 Jan 2013 14:40:25 -0800, "PrecisionmachinisT" wrote: "Ignoramus24272" wrote in ... plonk Your loss... Considering that you're also seemingly incapable of tying your ****ing shoelaces without asking a bunch of stupid-assed-off-topic questions on a metalworking news group. And considering that you have never provided any evidence of any knowledge of metalworking while Iggy is smart enough to ask questions... I no longer care about anyone's opinion as to whether I am a "deserving metalworker", ever since I converted my Bridgeport mill to LinuxCNC. I have proven something to myself and I could not care less now about what anyone else thinks. i Converting a Bridgeport knee mill to a Linux controlled CNC doesn't make one a machinist. When you make statements like this it shows how little you know about machining. Your tremendous ego holds you back from starting at ground zero and taking adult education for machining. You don't have the proper machining foundation and it shows constantly. Your ego has gotten in the way for years with you learning the fundamentals of machining. Ego getting in the way.... Oooo Jon, you've been looking in the mirror. -- Cheers, John B. |
#44
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
"Jonathan Banquer" wrote in message
news:fc6ef649-61d0-4b27-b953- ...It's why most engineers can't machine their way out of a paper bag. Like you, they think they're smarter than real machinists and that their smarts can make up for the experience of cutting lots and lots of different parts made out of different materials. Here is a news flash for you bubba... it can't. That certainly wasn't the case at Segway where the engineers monopolized the CNC machines and forced me to use the manual ones. The flip side is machinists with no clue about Statics or Dynamics who take shortcuts like this one that caused the Kansas City Skyway collapse. In case the explanation isn't clear, the threads bore the load meant to be carried by the core of the rod. Unless the coupler has been carefully dimensioned to stretch at the same rate as the rod, the threads will fail progressively inwards from the ends at a load far below the rod's tensile strength. Nonintuitively a thicker coupler makes a weaker connection by concentrating the load on the first few threads instead of distributing it over all of them. I learned this from a lecture by the accident investigator. http://www.churcharchitect.net/1142004.htm jsw |
#45
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
On Thu, 3 Jan 2013 07:27:37 -0500, "Jim Wilkins"
wrote: "Jonathan Banquer" wrote in message news:fc6ef649-61d0-4b27-b953- ...It's why most engineers can't machine their way out of a paper bag. Like you, they think they're smarter than real machinists and that their smarts can make up for the experience of cutting lots and lots of different parts made out of different materials. Here is a news flash for you bubba... it can't. That certainly wasn't the case at Segway where the engineers monopolized the CNC machines and forced me to use the manual ones. The flip side is machinists with no clue about Statics or Dynamics who take shortcuts like this one that caused the Kansas City Skyway collapse. In case the explanation isn't clear, the threads bore the load meant to be carried by the core of the rod. Unless the coupler has been carefully dimensioned to stretch at the same rate as the rod, the threads will fail progressively inwards from the ends at a load far below the rod's tensile strength. Nonintuitively a thicker coupler makes a weaker connection by concentrating the load on the first few threads instead of distributing it over all of them. I learned this from a lecture by the accident investigator. http://www.churcharchitect.net/1142004.htm jsw See the Wikipedia article. http://en.wikipedia.org/wiki/Hyatt_R...lkway_collapse It's interesting to note that yes, the contractor suggested a modified design to enable actual construction of the walkways in the field which finally led to the collapse, but the engineering firm made the original dumbass design that created the need for some type of modification, the original being hanger rods threaded all the way from the second floor walkway to the fourth floor walkway, and secondarily, support beams welded from two channels to make a box beam, with the hanger rods passing right through the welded seam, the weakest point on the beam. Plenty of blame to go around on that one. Pete Keillor |
#46
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
On Wed, 2 Jan 2013 21:22:33 -0800 (PST), Jonathan Banquer
wrote: On Jan 2, 8:44*pm, Ignoramus24272 ignoramus24...@NOSPAM. 24272.invalid wrote: On 2013-01-03, Steve B wrote: "Ignoramus24272" wrote in message news On 2013-01-03, John B wrote: On Wed, 2 Jan 2013 14:40:25 -0800, "PrecisionmachinisT" wrote: "Ignoramus24272" wrote in message ... plonk Your loss... Considering that you're also seemingly incapable of tying your ****ing shoelaces without asking a bunch of stupid-assed-off-topic questions on a metalworking news group. And considering that you have never provided any evidence of any knowledge of metalworking while Iggy is smart enough to ask questions... I no longer care about anyone's opinion as to whether I am a "deserving metalworker", ever since I converted my Bridgeport mill to LinuxCNC. I have proven something to myself and I could not care less now about what anyone else thinks. i I believe I was about 13, and wore huaraches to school, which a few people didn't like. *I didn't care. Huaraches are sandals made out of a combination of leather tops and tire tread bottoms. If you care what people think about you, you are without a rudder, and have a hole at the water line. On some level, I do care what people think about me, it is called reputation and it is important. But I try to form my own opinions about various factual things or when thinking about the present and future. i Bull****, Iggy. You don't care what real machinists think about you. Real machinists who have to deal with your bull**** think you're a ****ing moron. The reason you are a moron is that you refuse to pay your dues. Many engineers suffer from the same mental illness you suffer from. It's why most engineers can't machine their way out of a paper bag. Like you, they think they're smarter than real machinists and that their smarts can make up for the experience of cutting lots and lots of different parts made out of different materials. Here is a news flash for you bubba... it can't. Are you implying that you are a "real" machinist? And, you served your apprenticeship where? Adult education class? From reading the posts that you have made here it appears that ~you~ really can't do metalworking, You can program a machine to do metal working but that is a long, long, step away from actually doing hands on work. -- Cheers, John B. |
#47
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
"Pete Keillor" wrote in message ... On Thu, 3 Jan 2013 07:27:37 -0500, "Jim Wilkins" wrote: "Jonathan Banquer" wrote in message news:fc6ef649-61d0-4b27-b953- ...It's why most engineers can't machine their way out of a paper bag. Like you, they think they're smarter than real machinists and that their smarts can make up for the experience of cutting lots and lots of different parts made out of different materials. Here is a news flash for you bubba... it can't. That certainly wasn't the case at Segway where the engineers monopolized the CNC machines and forced me to use the manual ones. The flip side is machinists with no clue about Statics or Dynamics who take shortcuts like this one that caused the Kansas City Skyway collapse. In case the explanation isn't clear, the threads bore the load meant to be carried by the core of the rod. Unless the coupler has been carefully dimensioned to stretch at the same rate as the rod, the threads will fail progressively inwards from the ends at a load far below the rod's tensile strength. Nonintuitively a thicker coupler makes a weaker connection by concentrating the load on the first few threads instead of distributing it over all of them. I learned this from a lecture by the accident investigator. http://www.churcharchitect.net/1142004.htm jsw See the Wikipedia article. http://en.wikipedia.org/wiki/Hyatt_R...lkway_collapse It's interesting to note that yes, the contractor suggested a modified design to enable actual construction of the walkways in the field which finally led to the collapse, but the engineering firm made the original dumbass design that created the need for some type of modification, the original being hanger rods threaded all the way from the second floor walkway to the fourth floor walkway, and secondarily, support beams welded from two channels to make a box beam, with the hanger rods passing right through the welded seam, the weakest point on the beam. Plenty of blame to go around on that one. Pete Keillor IIRC the fabricator didn't have enough clearance around his lathe to turn the rods in one piece, and didn't want to sub the job out. The full-length rods were also expensive/difficult to transport. |
#48
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
On Thu, 03 Jan 2013 18:21:44 +0700, John B.
wrote: On Wed, 2 Jan 2013 17:08:40 -0800 (PST), jon_banquer wrote: On Jan 2, 4:59*pm, John B. wrote: On Wed, 2 Jan 2013 14:40:25 -0800, "PrecisionmachinisT" wrote: "Ignoramus24272" wrote in ... plonk Your loss... Considering that you're also seemingly incapable of tying your ****ing shoelaces without asking a bunch of stupid-assed-off-topic questions on a metalworking news group. And considering that you have never provided any evidence of any knowledge of metalworking while Iggy is smart enough to ask questions... plonk! -- Cheers, John B. John B. would you please plonk me as well since you can't see that for years Iggy has done everything possible to run away from what he needs to do to build his machining skills. Iggy is focused on one thing and one thing only: buying stuff as cheap as he can. Not a bad skill to have but when it blinds you, like it blinds Iggy, towards paying the price and building his machining skills, I think it's a major problem. I guess he runs an Algebra help website and writes software and that's great but he seems to think he doesn't need adult eduction for machining, which is too bad because the Chicago area probably has some great programs for machining and for welding. He's tried to buy very high quality stuff that I sell dirt cheap from me and I told him forget it. I don't sell the high quality stuff I own for nothing. I guess he was insulted that I wouldn't lower my prices. Well, I've been here about as long as Iggy and I've certainly seen him post questions. But why not? Unless you happen to be one of those folks who "know everything" you will certainly, from time to time have a question to ask. Are you arguing that one should never help out anyone by answering their questions? As for "engineering skills", where did that come from? I don't believe Iggy ever claimed to be a machinist, or a welder for that matter, and why should he? He's not in the machine shop or welding shop business. Although I will say that instead of arguing about which version of CAM is the best he goes out and actually does something. Well said! I was here when he first came in and asked about how to do simple welding...probably 10-12 yrs ago. He has come a long way. Gunner The methodology of the left has always been: 1. Lie 2. Repeat the lie as many times as possible 3. Have as many people repeat the lie as often as possible 4. Eventually, the uninformed believe the lie 5. The lie will then be made into some form oflaw 6. Then everyone must conform to the lie |
#49
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
On Jan 3, 3:29*am, John B. wrote:
On Wed, 2 Jan 2013 17:10:47 -0800 (PST), jon_banquer wrote: On Jan 2, 4:57*pm, wrote: On Wed, 2 Jan 2013 14:24:01 -0800 (PST), jon_banquer wrote: On Jan 2, 1:05 pm, Ignoramus24272 ignoramus24...@NOSPAM. 24272.invalid wrote: plonk On 2013-01-02, PrecisionmachinisT wrote: "Steve B" wrote in message ... My wife has some honey that her mom put up about ten to fifteen years ago. Some have comb in it. It had started to crystallize. We put it in hot water for a time, and the crystals disappeared. Now, the comb has melted. How do we separate the wax from the honey? I figured there were enough old people here to find someone who knew this. The foodie newsgroups on the Internet are not user friendly unless you are a member of the ruling cabal. My gawd you are stupid. Hey Iggy can you plonk me as well because I think you're a clueless idiot when it comes to machining and always will be because of your approach. I know it's wrong but every time I see your last name I'm reminded of this scene from The Green Hornet movie. The movie pretty much sucked ass except for this scene: http://www.funnyordie.com/videos/681...ornet-scene-wi.... Ah well. When I see your posts it comes to mind that you really aren't a metal worker, you are just another computer programmer and about as skilled as the "cobel coders" of yesteryear. It's clear to me you don't have much of a mind and that you have no clues what modern CNC machining is all about. To be a good CADCAM programmer you must be a good machinist. Interesting. Where did you serve your apprenticeship, were you trained to be a machinist or? -- Cheers, John B. I graduated from Kaynor Tech in Waterbury, Connecticut machine / toolmaker program with 1080 hours credited toward my machining apprenticeship. I've stated this numerous times on Usenet. That you're not able to find it is no surprise because like Steve B you're a brain dead moron with no clues. |
#50
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
On Jan 3, 4:27*am, "Jim Wilkins" wrote:
"Jonathan Banquer" wrote in message news:fc6ef649-61d0-4b27-b953- ...It's why most engineers can't machine their way out of a paper bag. Like you, they think they're smarter than real machinists and that their smarts can make up for the experience of cutting lots and lots of different parts made out of different materials. Here is a news flash for you bubba... it can't. That certainly wasn't the case at Segway where the engineers monopolized the CNC machines and forced me to use the manual ones. The flip side is machinists with no clue about Statics or Dynamics who take shortcuts like this one that caused the Kansas City Skyway collapse. In case the explanation isn't clear, the threads bore the load meant to be carried by the core of the rod. Unless the coupler has been carefully dimensioned to stretch at the same rate as the rod, the threads will fail progressively inwards from the ends at a load far below the rod's tensile strength. Nonintuitively a thicker coupler makes a weaker connection by concentrating the load on the first few threads instead of distributing it over all of them. I learned this from a lecture by the accident investigator.http://www.churcharchitect.net/1142004.htm jsw There is no flip side. You either pay your dues making lots of different parts from lots of different materials and become a real machinist or you don't. You don't need a CNC machine to make lots of different parts from lots of different materials. |
#51
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
On Jan 3, 5:17*am, John B. wrote:
On Wed, 2 Jan 2013 21:22:33 -0800 (PST), Jonathan Banquer wrote: On Jan 2, 8:44*pm, Ignoramus24272 ignoramus24...@NOSPAM. 24272.invalid wrote: On 2013-01-03, Steve B wrote: "Ignoramus24272" wrote in message news On 2013-01-03, John B wrote: On Wed, 2 Jan 2013 14:40:25 -0800, "PrecisionmachinisT" wrote: "Ignoramus24272" wrote in message ... plonk Your loss... Considering that you're also seemingly incapable of tying your ****ing shoelaces without asking a bunch of stupid-assed-off-topic questions on a metalworking news group. And considering that you have never provided any evidence of any knowledge of metalworking while Iggy is smart enough to ask questions... I no longer care about anyone's opinion as to whether I am a "deserving metalworker", ever since I converted my Bridgeport mill to LinuxCNC. I have proven something to myself and I could not care less now about what anyone else thinks. i I believe I was about 13, and wore huaraches to school, which a few people didn't like. *I didn't care. Huaraches are sandals made out of a combination of leather tops and tire tread bottoms. If you care what people think about you, you are without a rudder, and have a hole at the water line. On some level, I do care what people think about me, it is called reputation and it is important. But I try to form my own opinions about various factual things or when thinking about the present and future. i Bull****, Iggy. You don't care what real machinists think about you. Real machinists who have to deal with your bull**** think you're a ****ing moron. The reason you are a moron is that you refuse to pay your dues. Many engineers suffer from the same mental illness you suffer from. It's why most engineers can't machine their way out of a paper bag. Like you, they think they're smarter than real machinists and that their smarts can make up for the experience of cutting lots and lots of different parts made out of different materials. Here is a news flash for you bubba... it can't. Are you implying that you are a "real" machinist? And, you served your apprenticeship where? Adult education class? From reading the posts that you have made here it appears that ~you~ really can't do metalworking, You can program a machine to do metal working but that is a long, long, step away from actually doing hands on work. -- Cheers, John B. Much like Steve B and Tom Gardner you can't use Google and your both lazy and dumb. I have hundreds of posts on Usenet that discuss machining and machining techniques. |
#52
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
On 1/3/2013 8:27 AM, Jonathan Banquer wrote:
On Jan 3, 5:17 am, John B. wrote: On Wed, 2 Jan 2013 21:22:33 -0800 (PST), Jonathan Banquer wrote: On Jan 2, 8:44 pm, Ignoramus24272 ignoramus24...@NOSPAM. 24272.invalid wrote: On 2013-01-03, Steve B wrote: "Ignoramus24272" wrote in message news On 2013-01-03, John B wrote: On Wed, 2 Jan 2013 14:40:25 -0800, "PrecisionmachinisT" wrote: "Ignoramus24272" wrote in message ... plonk Your loss... Considering that you're also seemingly incapable of tying your ****ing shoelaces without asking a bunch of stupid-assed-off-topic questions on a metalworking news group. And considering that you have never provided any evidence of any knowledge of metalworking while Iggy is smart enough to ask questions... I no longer care about anyone's opinion as to whether I am a "deserving metalworker", ever since I converted my Bridgeport mill to LinuxCNC. I have proven something to myself and I could not care less now about what anyone else thinks. i I believe I was about 13, and wore huaraches to school, which a few people didn't like. I didn't care. Huaraches are sandals made out of a combination of leather tops and tire tread bottoms. If you care what people think about you, you are without a rudder, and have a hole at the water line. On some level, I do care what people think about me, it is called reputation and it is important. But I try to form my own opinions about various factual things or when thinking about the present and future. i Bull****, Iggy. You don't care what real machinists think about you. Real machinists who have to deal with your bull**** think you're a ****ing moron. The reason you are a moron is that you refuse to pay your dues. Many engineers suffer from the same mental illness you suffer from. It's why most engineers can't machine their way out of a paper bag. Like you, they think they're smarter than real machinists and that their smarts can make up for the experience of cutting lots and lots of different parts made out of different materials. Here is a news flash for you bubba... it can't. Are you implying that you are a "real" machinist? And, you served your apprenticeship where? Adult education class? From reading the posts that you have made here it appears that ~you~ really can't do metalworking, You can program a machine to do metal working but that is a long, long, step away from actually doing hands on work. -- Cheers, John B. Much like Steve B and Tom Gardner you can't use Google and your both lazy and dumb. I have hundreds of posts on Usenet that discuss machining and machining techniques. Every one of them is bull**** and is mocked, denigrated and disparaged by *everyone* else. I have never seen a single person side with you on anything, little jonny banqueer. You are a ****ing pariah, and it's almost entirely because you're a ****bag in addition to being an ignorant blowhard with bad values. -- Any more lip out of you and I'll haul off and let you have it...if you know what's good for you, you won't monkey around with Fred C. Dobbs. |
#53
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
On Jan 3, 8:32*am, "Fred C. Dobbs" wrote:
On 1/3/2013 8:27 AM, Jonathan Banquer wrote: On Jan 3, 5:17 am, John B. wrote: On Wed, 2 Jan 2013 21:22:33 -0800 (PST), Jonathan Banquer wrote: On Jan 2, 8:44 pm, Ignoramus24272 ignoramus24...@NOSPAM. 24272.invalid wrote: On 2013-01-03, Steve B wrote: "Ignoramus24272" wrote in message newstqdnRHruM_7fHnNnZ2dnUVZ_rydnZ2d@giganew s.com... On 2013-01-03, John B wrote: On Wed, 2 Jan 2013 14:40:25 -0800, "PrecisionmachinisT" wrote: "Ignoramus24272" wrote in message ... plonk Your loss... Considering that you're also seemingly incapable of tying your ****ing shoelaces without asking a bunch of stupid-assed-off-topic questions on a metalworking news group. And considering that you have never provided any evidence of any knowledge of metalworking while Iggy is smart enough to ask questions... I no longer care about anyone's opinion as to whether I am a "deserving metalworker", ever since I converted my Bridgeport mill to LinuxCNC. I have proven something to myself and I could not care less now about what anyone else thinks. i I believe I was about 13, and wore huaraches to school, which a few people didn't like. *I didn't care. Huaraches are sandals made out of a combination of leather tops and tire tread bottoms. If you care what people think about you, you are without a rudder, and have a hole at the water line. On some level, I do care what people think about me, it is called reputation and it is important. But I try to form my own opinions about various factual things or when thinking about the present and future. i Bull****, Iggy. You don't care what real machinists think about you. Real machinists who have to deal with your bull**** think you're a ****ing moron. The reason you are a moron is that you refuse to pay your dues. Many engineers suffer from the same mental illness you suffer from. It's why most engineers can't machine their way out of a paper bag. Like you, they think they're smarter than real machinists and that their smarts can make up for the experience of cutting lots and lots of different parts made out of different materials. Here is a news flash for you bubba... it can't. Are you implying that you are a "real" machinist? And, you served your apprenticeship where? Adult education class? *From reading the posts that you have made here it appears that ~you~ really can't do metalworking, You can program a machine to do metal working but that is a long, long, step away from actually doing hands on work. -- Cheers, John B. Much like Steve B and Tom Gardner you can't use Google and your both lazy and dumb. I have hundreds of posts on Usenet that discuss machining and machining techniques. Every one of them is bull**** and is mocked, denigrated and disparaged by *everyone* else. *I have never seen a single person side with you on anything, little jonny banqueer. *You are a ****ing pariah, and it's almost entirely because you're a ****bag in addition to being an ignorant blowhard with bad values. -- Any more lip out of you and I'll haul off and let you have it...if you know what's good for you, you won't monkey around with Fred C. Dobbs. Wrong again, Brain Dead Fred. I'll remind you again that you only speak for yourself not *everyone* else like you constantly try to do. You seem to really struggle with facts like this. |
#54
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
On 1/3/2013 8:43 AM, little jonny "bozo" banqueer lied:
On Jan 3, 8:32 am, "Fred C. Dobbs" wrote: On 1/3/2013 8:27 AM, little jonny "bozo" banqueer lied: Are you implying that you are a "real" machinist? And, you served your apprenticeship where? Adult education class? From reading the posts that you have made here it appears that ~you~ really can't do metalworking, You can program a machine to do metal working but that is a long, long, step away from actually doing hands on work. -- Cheers, John B. Much like Steve B and Tom Gardner you can't use Google and your both lazy and dumb. I have hundreds of posts on Usenet that discuss machining and machining techniques. Every one of them is bull**** and is mocked, denigrated and disparaged by *everyone* else. I have never seen a single person side with you on anything, little jonny banqueer. You are a ****ing pariah, and it's almost entirely because you're a ****bag in addition to being an ignorant blowhard with bad values. -- Any more lip out of you and I'll haul off and let you have it...if you know what's good for you, you won't monkey around with Fred C. Dobbs. Wrong again, Nope - I'm *right*, and you and everyone else know it. *EVERYONE* thinks you're a dull, plodding, zero-achieving ****bag, and that's exactly what you are. I'll remind you again that you only speak for yourself In *THIS* context, little jonny "bozo" banqueer, I speak for everyone. -- Any more lip out of you and I'll haul off and let you have it...if you know what's good for you, you won't monkey around with Fred C. Dobbs. |
#55
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
Wrong again, Brain Dead Fred.
I'll remind you again that you only speak for yourself not *everyone* else like you constantly try to do. You seem to really struggle with facts like this. |
#56
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
On 1/3/2013 8:27 AM, Jonathan Banquer wrote:
On Jan 3, 5:17 am, John B. wrote: On Wed, 2 Jan 2013 21:22:33 -0800 (PST), Jonathan Banquer wrote: On Jan 2, 8:44 pm, Ignoramus24272 ignoramus24...@NOSPAM. 24272.invalid wrote: On 2013-01-03, Steve B wrote: "Ignoramus24272" wrote in message news On 2013-01-03, John B wrote: On Wed, 2 Jan 2013 14:40:25 -0800, "PrecisionmachinisT" wrote: "Ignoramus24272" wrote in message ... plonk Your loss... Considering that you're also seemingly incapable of tying your ****ing shoelaces without asking a bunch of stupid-assed-off-topic questions on a metalworking news group. And considering that you have never provided any evidence of any knowledge of metalworking while Iggy is smart enough to ask questions... I no longer care about anyone's opinion as to whether I am a "deserving metalworker", ever since I converted my Bridgeport mill to LinuxCNC. I have proven something to myself and I could not care less now about what anyone else thinks. i I believe I was about 13, and wore huaraches to school, which a few people didn't like. I didn't care. Huaraches are sandals made out of a combination of leather tops and tire tread bottoms. If you care what people think about you, you are without a rudder, and have a hole at the water line. On some level, I do care what people think about me, it is called reputation and it is important. But I try to form my own opinions about various factual things or when thinking about the present and future. i Bull****, Iggy. You don't care what real machinists think about you. Real machinists who have to deal with your bull**** think you're a ****ing moron. The reason you are a moron is that you refuse to pay your dues. Many engineers suffer from the same mental illness you suffer from. It's why most engineers can't machine their way out of a paper bag. Like you, they think they're smarter than real machinists and that their smarts can make up for the experience of cutting lots and lots of different parts made out of different materials. Here is a news flash for you bubba... it can't. Are you implying that you are a "real" machinist? And, you served your apprenticeship where? Adult education class? From reading the posts that you have made here it appears that ~you~ really can't do metalworking, You can program a machine to do metal working but that is a long, long, step away from actually doing hands on work. -- Cheers, John B. Much like Steve B and Tom Gardner you can't use Google and your both lazy and dumb. I have hundreds of posts on Usenet that discuss machining and machining techniques. Every one of them is bull**** and is mocked, denigrated and disparaged by *everyone* else. I have never seen a single person side with you on anything, little jonny banqueer. You are a ****ing pariah, and it's almost entirely because you're a ****bag in addition to being an ignorant blowhard with bad values. -- Any more lip out of you and I'll haul off and let you have it...if you know what's good for you, you won't monkey around with Fred C. Dobbs. |
#57
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
Wrong again, Brain Dead Fred.
I'll remind you again that you only speak for yourself not *everyone* else like you constantly try to do. You seem to really struggle with facts like this. |
#58
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
"Ignoramus24272" wrote in message ... On 2013-01-03, Steve B wrote: "Ignoramus24272" wrote in message news On 2013-01-03, John B wrote: On Wed, 2 Jan 2013 14:40:25 -0800, "PrecisionmachinisT" wrote: "Ignoramus24272" wrote in message ... plonk Your loss... Considering that you're also seemingly incapable of tying your ****ing shoelaces without asking a bunch of stupid-assed-off-topic questions on a metalworking news group. And considering that you have never provided any evidence of any knowledge of metalworking while Iggy is smart enough to ask questions... I no longer care about anyone's opinion as to whether I am a "deserving metalworker", ever since I converted my Bridgeport mill to LinuxCNC. I have proven something to myself and I could not care less now about what anyone else thinks. i I believe I was about 13, and wore huaraches to school, which a few people didn't like. I didn't care. Huaraches are sandals made out of a combination of leather tops and tire tread bottoms. If you care what people think about you, you are without a rudder, and have a hole at the water line. On some level, I do care what people think about me, it is called reputation and it is important. But I try to form my own opinions about various factual things or when thinking about the present and future. i Reputation is important, both business, and personal. And real business acquaintances and real friends will have an idea of your personality, integrity, and character. So much so that if someone was to say something against you that your friends would question it, and come to you and ask. So, don't worry one whit about the anklebiters. Just those who are important in business, and friendship. My Dad said that if a man had six friends, he was lucky, and would be a pretty busy man enjoying those friendships. He said that after about six, the relationships start to shallow out, as you have less time to spend with each. When I was in business, my clients and suppliers were important to me. I paid no attention to others. All my life, I consider what my friends think of me to be a mirror of my own activity, and so long as I'm a decent friend, that mirror will be pretty reliable most of the time. The rest are unimportant babbling gossips, just like a lot of folks here. Don't worry about them. Not one whit. Steve |
#59
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
"Gunner" wrote I was here when he first came in and asked about how to do simple welding...probably 10-12 yrs ago. He has come a long way. Gunner If I recall, his first posts were about 7018 welding. And from what I see, he mastered that pretty well. And I see he's still asking questions, and learning. Unlike some here, who know it all. It has to be hard to be perfect. Steve |
#60
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
On 1/2/2013 8:44 PM, Ignoramus24272 wrote:
On 2013-01-03, Steve B wrote: "Ignoramus24272" wrote in message news On 2013-01-03, John B wrote: On Wed, 2 Jan 2013 14:40:25 -0800, "PrecisionmachinisT" wrote: "Ignoramus24272" wrote in message ... plonk Your loss... Considering that you're also seemingly incapable of tying your ****ing shoelaces without asking a bunch of stupid-assed-off-topic questions on a metalworking news group. And considering that you have never provided any evidence of any knowledge of metalworking while Iggy is smart enough to ask questions... I no longer care about anyone's opinion as to whether I am a "deserving metalworker", ever since I converted my Bridgeport mill to LinuxCNC. I have proven something to myself and I could not care less now about what anyone else thinks. i I believe I was about 13, and wore huaraches to school, which a few people didn't like. I didn't care. Huaraches are sandals made out of a combination of leather tops and tire tread bottoms. If you care what people think about you, you are without a rudder, and have a hole at the water line. On some level, I do care what people think about me, it is called reputation and it is important. But I try to form my own opinions about various factual things or when thinking about the present and future. Someone who doesn't care what anyone in the world thinks of him is a sociopath. I have long maintained that your friends are the people about whose opinions - of you and other things - you *do* care and *ought* to care. You might not change your course of action or your way of thinking if a friend criticizes it, but you sure as hell ought to give the friend's opinion more consideration than you would give the opinion of a stranger or someone you don't respect at all. Presumably, your friends - and their opinions - have earned at least some of your respect, or else why would they be your friends at all? -- Any more lip out of you and I'll haul off and let you have it...if you know what's good for you, you won't monkey around with Fred C. Dobbs. |
#61
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
On 1/3/2013 3:21 AM, John B. wrote:
On Wed, 2 Jan 2013 17:08:40 -0800 (PST), jon_banquer wrote: On Jan 2, 4:59 pm, John B. wrote: On Wed, 2 Jan 2013 14:40:25 -0800, "PrecisionmachinisT" wrote: "Ignoramus24272" wrote in ... plonk Your loss... Considering that you're also seemingly incapable of tying your ****ing shoelaces without asking a bunch of stupid-assed-off-topic questions on a metalworking news group. And considering that you have never provided any evidence of any knowledge of metalworking while Iggy is smart enough to ask questions... plonk! -- Cheers, John B. John B. would you please plonk me as well since you can't see that for years Iggy has done everything possible to run away from what he needs to do to build his machining skills. Iggy is focused on one thing and one thing only: buying stuff as cheap as he can. Not a bad skill to have but when it blinds you, like it blinds Iggy, towards paying the price and building his machining skills, I think it's a major problem. I guess he runs an Algebra help website and writes software and that's great but he seems to think he doesn't need adult eduction for machining, which is too bad because the Chicago area probably has some great programs for machining and for welding. He's tried to buy very high quality stuff that I sell dirt cheap from me and I told him forget it. I don't sell the high quality stuff I own for nothing. I guess he was insulted that I wouldn't lower my prices. Well, I've been here about as long as Iggy and I've certainly seen him post questions. But why not? Unless you happen to be one of those folks who "know everything" you will certainly, from time to time have a question to ask. Are you arguing that one should never help out anyone by answering their questions? As for "engineering skills", where did that come from? I don't believe Iggy ever claimed to be a machinist, or a welder for that matter, and why should he? He's not in the machine shop or welding shop business. Although I will say that instead of arguing about which version of CAM is the best he goes out and actually does something. little jonny "bozo" banqueer, CAD/CAM *FRAUD*, doesn't actually "do" anything with CAD/CAM; he just blabbers about it meaninglessly. -- Any more lip out of you and I'll haul off and let you have it...if you know what's good for you, you won't monkey around with Fred C. Dobbs. |
#62
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
It's obvious that Fred C. Dobbs lost it when his cheap Chinese TV
couldn't be repaired. Seems like Brain Dead Fred is desperately looking for someone who can repair his cheap Chinese TV. I don't do TV repair. It's not in my skill set. Does anyone have this skill set that wants to do pro bono TV repair work and help mentally challenged Fred C Dobbs? It might get Fred C Dobbs and his numerous other posting aliases (Plimpton, Max Blast, maxheadroom, etc.) off Usenet and back to doing what he loves to do most: watching the Jerry Springer show. |
#63
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
"Jonathan Banquer" wrote On Jan 3, 4:27 am, "Jim Wilkins" wrote: The flip side is machinists with no clue about Statics or Dynamics who take shortcuts like this one ... -There is no flip side. You either pay your dues making lots of -different parts from lots of different materials and become a real -machinist or you don't. You don't need a CNC machine to make lots of -different parts from lots of different materials. I designed and built equipment where the electrical properties of machined surfaces mattered a lot, for skin effect or corona discharge. I didn't have stress risers on my lightly loaded parts but they are another cause of disputes. When the machinist didn't understand why an outside corner needed a large radius and smooth finish, but not close dimensional accuracy, they took the easy shortcut and then gave me lip until management had to order them to do it RIGHT. In general they assumed they knew more than the damned college boys and if they didn't understand the science driving a difficult requirement they resisted meeting it. The college boys stopped fighting them and made me the shop liaison, partly because if they made too much trouble I could do the job at home or bid it out to experimental shops I'd worked with in the past. |
#64
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
On 1/3/2013 9:57 AM, little jonny "bozo" banqueer, CAD/CAM *FRAUD*,
****ed away some more of his worthless time in Usenet with: It's obvious that ....that little jonny "bozo" banqueer, CAD/CAM *FRAUD*, doesn't actually *do* anything with CAD/CAM. He's a *fraud*. He just ****es away the hours in Usenet, and collects a few more LinkedIn "friends". -- Any more lip out of you and I'll haul off and let you have it...if you know what's good for you, you won't monkey around with Fred C. Dobbs. |
#65
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
On Jan 3, 9:58*am, "Jim Wilkins" wrote:
"Jonathan Banquer" wrote On Jan 3, 4:27 am, "Jim Wilkins" wrote: The flip side is machinists with no clue about Statics or Dynamics who take shortcuts like this one ... -There is no flip side. You either pay your dues making lots of -different parts from lots of different materials and become a real -machinist or you don't. You don't need a CNC machine to make lots of -different parts from lots of different materials. I designed and built equipment where the electrical properties of machined surfaces mattered a lot, for skin effect or corona discharge. I didn't have stress risers on my lightly loaded parts but they are another cause of disputes. When the machinist didn't understand why an outside corner needed a large radius and smooth finish, but not close dimensional accuracy, they took the easy shortcut and then gave me lip until management had to order them to do it RIGHT. In general they assumed they knew more than the damned college boys and if they didn't understand the science driving a difficult requirement they resisted meeting it. The college boys stopped fighting them and made me the shop liaison, partly because if they made too much trouble I could do the job at home or bid it out to experimental shops I'd worked with in the past. For the twenty years I've been machining there has always been a wall between engineering and machining. I don't see any improvement coming in this area anytime soon. |
#66
Posted to rec.crafts.metalworking
|
|||
|
|||
little jonny "bozo" banqueer, CAD/CAM fraud: no "skill set" chortleat all
little jonny "bozo" banqueer's only chortle "skill" is clicking
"connect" on LinkedIn with people who are equally interested in trying to win a prize for the most LinkedIn "friends". Their endorsement of little jonny "bozo" banqueer's chortle "skill set" carries about as much meaning as little jonny "bozo" banqueer's political opinions - they are the disrespected, disparaged, mocked opinions of do-nothings. -- Any more lip out of you and I'll haul off and let you have it...if you know what's good for you, you won't monkey around with Fred C. Dobbs. |
#67
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
On 1/3/2013 10:04 AM, jon_banquer wrote:
On Jan 3, 9:58 am, "Jim Wilkins" wrote: "Jonathan Banquer" wrote On Jan 3, 4:27 am, "Jim Wilkins" wrote: The flip side is machinists with no clue about Statics or Dynamics who take shortcuts like this one ... -There is no flip side. You either pay your dues making lots of -different parts from lots of different materials and become a real -machinist or you don't. You don't need a CNC machine to make lots of -different parts from lots of different materials. I designed and built equipment where the electrical properties of machined surfaces mattered a lot, for skin effect or corona discharge. I didn't have stress risers on my lightly loaded parts but they are another cause of disputes. When the machinist didn't understand why an outside corner needed a large radius and smooth finish, but not close dimensional accuracy, they took the easy shortcut and then gave me lip until management had to order them to do it RIGHT. In general they assumed they knew more than the damned college boys and if they didn't understand the science driving a difficult requirement they resisted meeting it. The college boys stopped fighting them and made me the shop liaison, partly because if they made too much trouble I could do the job at home or bid it out to experimental shops I'd worked with in the past. For the twenty years I've been machining HA HA HA HA HA! Jumping ****ing jesus, that's hilarious! -- Any more lip out of you and I'll haul off and let you have it...if you know what's good for you, you won't monkey around with Fred C. Dobbs. |
#68
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
On 1/3/2013 10:08 AM, whoyakidding's ghost wrote:
On Thu, 3 Jan 2013 10:39:52 -0700, "Steve B" wrote: All my life, I consider what my friends think of me to be a mirror of my own activity, and so long as I'm a decent friend, that mirror will be pretty reliable most of the time. Racists tend to have racist friends, because "racist" - a meaningless left-wing swearword. Leftists, of course, are the worst racists around. They see race as being important - even determinative. *All* leftists are racist in this way; some individual conservatives may be racist, but most aren't, and race is not any part of conservative doctrine. Race and racial identity are deeply embedded in left-wing doctrine. -- Any more lip out of you and I'll haul off and let you have it...if you know what's good for you, you won't monkey around with Fred C. Dobbs. |
#69
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
On Jan 3, 9:58*am, "Jim Wilkins" wrote:
"Jonathan Banquer" wrote On Jan 3, 4:27 am, "Jim Wilkins" wrote: The flip side is machinists with no clue about Statics or Dynamics who take shortcuts like this one ... -There is no flip side. You either pay your dues making lots of -different parts from lots of different materials and become a real -machinist or you don't. You don't need a CNC machine to make lots of -different parts from lots of different materials. I designed and built equipment where the electrical properties of machined surfaces mattered a lot, for skin effect or corona discharge. I didn't have stress risers on my lightly loaded parts but they are another cause of disputes. When the machinist didn't understand why an outside corner needed a large radius and smooth finish, but not close dimensional accuracy, they took the easy shortcut and then gave me lip until management had to order them to do it RIGHT. In general they assumed they knew more than the damned college boys and if they didn't understand the science driving a difficult requirement they resisted meeting it. The college boys stopped fighting them and made me the shop liaison, partly because if they made too much trouble I could do the job at home or bid it out to experimental shops I'd worked with in the past. "When the machinist didn't understand why an outside corner needed a large radius and smooth finish, but not close dimensional accuracy, they took the easy shortcut and then gave me lip until management had to order them to do it RIGHT. " The forgot to mention the other side of the story which is far more common: Arrogant, ignorant engineers who don't understand machining and who don't think they need to learn anything from a machinist calling for needless small radius's in the bottom of deep pockets. They whine like spoiled little bitches when their part is so expensive / takes to long to machine. |
#70
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
It's obvious that Fred C. Dobbs lost it when his cheap Chinese TV
couldn't be repaired. Seems like Brain Dead Fred is desperately looking for someone who can repair his cheap Chinese TV. I don't do TV repair. It's not in my skill set. Does anyone have this skill set that wants to do pro bono TV repair work and help mentally challenged Fred C Dobbs? It might get Fred C Dobbs and his numerous other posting aliases (Plimpton, Max Blast, maxheadroom, etc.) off Usenet and back to doing what he loves to do most: watching the Jerry Springer show. |
#71
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
On 1/3/2013 10:15 AM, jon_banquer wrote:
On Jan 3, 9:58 am, "Jim Wilkins" wrote: "Jonathan Banquer" wrote On Jan 3, 4:27 am, "Jim Wilkins" wrote: The flip side is machinists with no clue about Statics or Dynamics who take shortcuts like this one ... -There is no flip side. You either pay your dues making lots of -different parts from lots of different materials and become a real -machinist or you don't. You don't need a CNC machine to make lots of -different parts from lots of different materials. I designed and built equipment where the electrical properties of machined surfaces mattered a lot, for skin effect or corona discharge. I didn't have stress risers on my lightly loaded parts but they are another cause of disputes. When the machinist didn't understand why an outside corner needed a large radius and smooth finish, but not close dimensional accuracy, they took the easy shortcut and then gave me lip until management had to order them to do it RIGHT. In general they assumed they knew more than the damned college boys and if they didn't understand the science driving a difficult requirement they resisted meeting it. The college boys stopped fighting them and made me the shop liaison, partly because if they made too much trouble I could do the job at home or bid it out to experimental shops I'd worked with in the past. "When the machinist didn't understand why an outside corner needed a large radius and smooth finish, but not close dimensional accuracy, they took the easy shortcut and then gave me lip until management had to order them to do it RIGHT. " The forgot to mention the other side of the story which is far more common: Arrogant, ignorant engineers who don't understand machining You, little jonny "bozo" banqueer, CAD/CAM *FRAUD*, understand neither engineering nor machining. -- Any more lip out of you and I'll haul off and let you have it...if you know what's good for you, you won't monkey around with Fred C. Dobbs. |
#72
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
On 1/3/2013 9:57 AM, little jonny "bozo" banqueer, CAD/CAM *FRAUD*,
****ed away some more of his worthless time in Usenet with: It's obvious that ....that little jonny "bozo" banqueer, CAD/CAM *FRAUD*, doesn't actually *do* anything with CAD/CAM. He's a *fraud*. He just ****es away the hours in Usenet, and collects a few more LinkedIn "friends". -- Any more lip out of you and I'll haul off and let you have it...if you know what's good for you, you won't monkey around with Fred C. Dobbs. |
#73
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
It's obvious that Fred C. Dobbs lost it when his cheap Chinese TV
couldn't be repaired. Seems like Brain Dead Fred is desperately looking for someone who can repair his cheap Chinese TV. I don't do TV repair. It's not in my skill set. Does anyone have this skill set that wants to do pro bono TV repair work and help mentally challenged Fred C Dobbs? It might get Fred C Dobbs and his numerous other posting aliases (Plimpton, Max Blast, maxheadroom, etc.) off Usenet and back to doing what he loves to do most: watching the Jerry Springer show. |
#74
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
On 1/3/2013 9:57 AM, little jonny "bozo" banqueer, CAD/CAM *FRAUD*,
****ed away some more of his worthless time in Usenet with: It's obvious that ....that little jonny "bozo" banqueer, CAD/CAM *FRAUD*, doesn't actually *do* anything with CAD/CAM. He's a *fraud*. He just ****es away the hours in Usenet, and collects a few more LinkedIn "friends". -- Any more lip out of you and I'll haul off and let you have it...if you know what's good for you, you won't monkey around with Fred C. Dobbs. |
#75
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
On 1/3/2013 9:57 AM, little jonny "bozo" banqueer, CAD/CAM *FRAUD*,
****ed away some more of his worthless time in Usenet with: It's obvious that ....that little jonny "bozo" banqueer, CAD/CAM *FRAUD*, doesn't actually *do* anything with CAD/CAM. He's a *fraud*. He just ****es away the hours in Usenet, and collects a few more LinkedIn "friends". -- Any more lip out of you and I'll haul off and let you have it...if you know what's good for you, you won't monkey around with Fred C. Dobbs. |
#76
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
On 1/3/2013 9:57 AM, little jonny "bozo" banqueer, CAD/CAM *FRAUD*,
****ed away some more of his worthless time in Usenet with: It's obvious that ....that little jonny "bozo" banqueer, CAD/CAM *FRAUD*, doesn't actually *do* anything with CAD/CAM. He's a *fraud*. He just ****es away the hours in Usenet, and collects a few more LinkedIn "friends". -- Any more lip out of you and I'll haul off and let you have it...if you know what's good for you, you won't monkey around with Fred C. Dobbs. |
#77
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
It's obvious that Fred C. Dobbs lost it when his cheap Chinese TV
couldn't be repaired. Seems like Brain Dead Fred is desperately looking for someone who can repair his cheap Chinese TV. I don't do TV repair. It's not in my skill set. Does anyone have this skill set that wants to do pro bono TV repair work and help mentally challenged Fred C Dobbs? It might get Fred C Dobbs and his numerous other posting aliases (Plimpton, Max Blast, maxheadroom, etc.) off Usenet and back to doing what he loves to do most: watching the Jerry Springer show. |
#78
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
On 1/3/2013 9:57 AM, little jonny "bozo" banqueer, CAD/CAM *FRAUD*,
****ed away some more of his worthless time in Usenet with: It's obvious that ....that little jonny "bozo" banqueer, CAD/CAM *FRAUD*, doesn't actually *do* anything with CAD/CAM. He's a *fraud*. He just ****es away the hours in Usenet, and collects a few more LinkedIn "friends". -- Any more lip out of you and I'll haul off and let you have it...if you know what's good for you, you won't monkey around with Fred C. Dobbs. |
#79
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
On 1/3/2013 9:57 AM, little jonny "bozo" banqueer, CAD/CAM *FRAUD*,
****ed away some more of his worthless time in Usenet with: It's obvious that ....that little jonny "bozo" banqueer, CAD/CAM *FRAUD*, doesn't actually *do* anything with CAD/CAM. He's a *fraud*. He just ****es away the hours in Usenet, and collects a few more LinkedIn "friends". -- Any more lip out of you and I'll haul off and let you have it...if you know what's good for you, you won't monkey around with Fred C. Dobbs. |
#80
Posted to rec.crafts.metalworking
|
|||
|
|||
Old fart honey question
On 1/3/2013 9:57 AM, little jonny "bozo" banqueer, CAD/CAM *FRAUD*,
****ed away some more of his worthless time in Usenet with: It's obvious that ....that little jonny "bozo" banqueer, CAD/CAM *FRAUD*, doesn't actually *do* anything with CAD/CAM. He's a *fraud*. He just ****es away the hours in Usenet, and collects a few more LinkedIn "friends". -- Any more lip out of you and I'll haul off and let you have it...if you know what's good for you, you won't monkey around with Fred C. Dobbs. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Far off topic: old fart chuggin' on | Metalworking | |||
O/T: Ode To The Fart | Woodworking | |||
Correction: A Shitting Fart To Everybody | Home Repair | |||
Really Bad Fart Smell In My House!!! | UK diy |