DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Metalworking (https://www.diybanter.com/metalworking/)
-   -   Crown Stoves - Repair Parts (https://www.diybanter.com/metalworking/342669-crown-stoves-repair-parts.html)

Joseph Gwinn June 22nd 12 01:50 AM

Crown Stoves - Repair Parts
 
I have a big old 6-burner Crown (model H3005702 845-242KG0E-10) natural
gas stove that my wife just loves, but is in need of some repair.
Specifically, the spark igniters are not firing on all pistons, but the
burners work just fine if lit with a match.

Crown has been out of business for decades now.

Does anyone know where to buy parts, or retro-fit parts? For instance,
I bet the same spark igniters were used on numerous makes and models of
stove, so there is likely something that will fit.


Thanks,

Joe Gwinn

Denis G.[_2_] June 22nd 12 03:40 AM

Crown Stoves - Repair Parts
 
On Jun 21, 7:50*pm, Joseph Gwinn wrote:
I have a big old 6-burner Crown (model H3005702 845-242KG0E-10) natural
gas stove that my wife just loves, but is in need of some repair.
Specifically, the spark igniters are not firing on all pistons, but the
burners work just fine if lit with a match.

Crown has been out of business for decades now.

Does anyone know where to buy parts, or retro-fit parts? *For instance,
I bet the same spark igniters were used on numerous makes and models of
stove, so there is likely something that will fit.

Thanks,

Joe Gwinn


"Not firing on all pistons" reminds me of when I would run my car
engine in the dark to look for sparks jumping from the ignition
wires. Have you looked for high voltage "leaking" with the top off?

Elso, maybe you can contact these guys for help:
http://www.theignitorstore.com/catalog/norton_igniters/

Steve W.[_4_] June 22nd 12 03:58 AM

Crown Stoves - Repair Parts
 
Joseph Gwinn wrote:
I have a big old 6-burner Crown (model H3005702 845-242KG0E-10) natural
gas stove that my wife just loves, but is in need of some repair.
Specifically, the spark igniters are not firing on all pistons, but the
burners work just fine if lit with a match.

Crown has been out of business for decades now.

Does anyone know where to buy parts, or retro-fit parts? For instance,
I bet the same spark igniters were used on numerous makes and models of
stove, so there is likely something that will fit.


Thanks,

Joe Gwinn


Most of the Crown line was hand assembled. What was left of the company
was bought by Roper who then sold the range parts to GE.

Is the problem the igniters themselves the switches or the spark unit?
If you have say two burners that don't light while the others work fine
then it's probably a wiring problem to them. I don't think I have ever
seen the igniter tips fail unless they are physically damaged.
They are usually very simple spark gaps.

If the problem is that none of the burners work then it may be the spark
unit itself. That could be more difficult to deal with because you will
need to figure out how the switching works. Most use a simple switch in
each control that are parallel wired to the spark generator. Others used
individual switches that connect to a common buss. Either way you would
find the point where they connect up and wire in a different spark
generator. You should be able to use a newer unit depending on the problem.

http://www.pcappliancerepair.com
http://www.partselect.com/


--
Steve W.

Stanley Schaefer June 22nd 12 06:52 AM

Crown Stoves - Repair Parts
 
On Jun 21, 6:50*pm, Joseph Gwinn wrote:
I have a big old 6-burner Crown (model H3005702 845-242KG0E-10) natural
gas stove that my wife just loves, but is in need of some repair.
Specifically, the spark igniters are not firing on all pistons, but the
burners work just fine if lit with a match.

Crown has been out of business for decades now.

Does anyone know where to buy parts, or retro-fit parts? *For instance,
I bet the same spark igniters were used on numerous makes and models of
stove, so there is likely something that will fit.

Thanks,

Joe Gwinn


What sort of spark generator? A piezo pushbutton or something with an
actual coil hooked to AC? If you cruise around the big boxes, you can
usually find piezo replacements over in the grill section this time of
year. Usually fit into a 3/4-7/8" hole. Might be all that's needed
is to clean the spark gaps and regap. Wiring might have perished
insulation, too. No spark if it's jumping out somewhere other than
the gap.

Stan

Stormin Mormon[_7_] June 22nd 12 12:20 PM

Crown Stoves - Repair Parts
 
I've worked on stoves, where the spark worked. But, the little hole that let
some gas to the sparker got clogged by food residue. Had to take it all
apart, and clean the burners with oven cleaner.

Christopher A. Young
Learn more about Jesus
www.lds.org
..

"Joseph Gwinn" wrote in message
...
I have a big old 6-burner Crown (model H3005702 845-242KG0E-10) natural
gas stove that my wife just loves, but is in need of some repair.
Specifically, the spark igniters are not firing on all pistons, but the
burners work just fine if lit with a match.

Crown has been out of business for decades now.

Does anyone know where to buy parts, or retro-fit parts? For instance,
I bet the same spark igniters were used on numerous makes and models of
stove, so there is likely something that will fit.


Thanks,

Joe Gwinn



Joseph Gwinn June 22nd 12 02:53 PM

Crown Stoves - Repair Parts
 
In article ,
"Stormin Mormon" wrote:

I've worked on stoves, where the spark worked. But, the little hole that let
some gas to the sparker got clogged by food residue. Had to take it all
apart, and clean the burners with oven cleaner.


I did look for that, and found nothing. (It was the usual problem with
pilot-light stoves.) The other clue is that one does not hear a spark
from the burner that one is trying to ignite.

Joe Gwinn



Christopher A. Young
Learn more about Jesus
www.lds.org
.

"Joseph Gwinn" wrote in message
...
I have a big old 6-burner Crown (model H3005702 845-242KG0E-10) natural
gas stove that my wife just loves, but is in need of some repair.
Specifically, the spark igniters are not firing on all pistons, but the
burners work just fine if lit with a match.

Crown has been out of business for decades now.

Does anyone know where to buy parts, or retro-fit parts? For instance,
I bet the same spark igniters were used on numerous makes and models of
stove, so there is likely something that will fit.


Thanks,

Joe Gwinn


Joseph Gwinn June 22nd 12 02:57 PM

Crown Stoves - Repair Parts
 
In article
,
Stanley Schaefer wrote:

On Jun 21, 6:50*pm, Joseph Gwinn wrote:
I have a big old 6-burner Crown (model H3005702 845-242KG0E-10) natural
gas stove that my wife just loves, but is in need of some repair.
Specifically, the spark igniters are not firing on all pistons, but the
burners work just fine if lit with a match.

Crown has been out of business for decades now.

Does anyone know where to buy parts, or retro-fit parts? *For instance,
I bet the same spark igniters were used on numerous makes and models of
stove, so there is likely something that will fit.

Thanks,

Joe Gwinn


What sort of spark generator? A piezo pushbutton or something with an
actual coil hooked to AC? If you cruise around the big boxes, you can
usually find piezo replacements over in the grill section this time of
year. Usually fit into a 3/4-7/8" hole. Might be all that's needed
is to clean the spark gaps and regap. Wiring might have perished
insulation, too. No spark if it's jumping out somewhere other than
the gap.


It is electronic, powered by 120 vac. When one turns the gas all the
way up on a burner, a switch closes and the generator makes a spark
every second or so. When the burner ignites, one sets the knob to the
desired flame height. From listening, it seems that a given spark
generator drives two burners, but I'm not quite sure.

Spark leakage may be an issue, but it doesn't kill the other spark.

Joe Gwinn

Joseph Gwinn June 22nd 12 03:03 PM

Crown Stoves - Repair Parts
 
In article ,
"Steve W." wrote:

Joseph Gwinn wrote:
I have a big old 6-burner Crown (model H3005702 845-242KG0E-10) natural
gas stove that my wife just loves, but is in need of some repair.
Specifically, the spark igniters are not firing on all pistons, but the
burners work just fine if lit with a match.

Crown has been out of business for decades now.

Does anyone know where to buy parts, or retro-fit parts? For instance,
I bet the same spark igniters were used on numerous makes and models of
stove, so there is likely something that will fit.


Thanks,

Joe Gwinn


Most of the Crown line was hand assembled. What was left of the company
was bought by Roper who then sold the range parts to GE.

Is the problem the igniters themselves the switches or the spark unit?
If you have say two burners that don't light while the others work fine
then it's probably a wiring problem to them.


I'm not sure. In one case, I hear some other burner sparking, while the
intended burner is silent. In another case, there is no spark sound, so
I may have both problems.

I don't have any service manual information. Are such available
anywhere? One assumes they are available somewhere, in some form.


I don't think I have ever
seen the igniter tips fail unless they are physically damaged.
They are usually very simple spark gaps.


I have looked at these, and one did have a broken ceramic, but was able
to repair or replace it ten years ago, if memory serves.


If the problem is that none of the burners work then it may be the spark
unit itself. That could be more difficult to deal with because you will
need to figure out how the switching works. Most use a simple switch in
each control that are parallel wired to the spark generator. Others used
individual switches that connect to a common buss. Either way you would
find the point where they connect up and wire in a different spark
generator. You should be able to use a newer unit depending on the problem.

http://www.pcappliancerepair.com
http://www.partselect.com/


Most of the burners do work, so the main spark unit is OK. Only one
oven lights, though; used to be both worked. But something is busted,
and will need repair or replacement. Thanks for the URLs - I'll browse
them.

Thanks,

Joe Gwinn

Joseph Gwinn June 22nd 12 03:05 PM

Crown Stoves - Repair Parts
 
In article
,
"Denis G." wrote:

On Jun 21, 7:50*pm, Joseph Gwinn wrote:
I have a big old 6-burner Crown (model H3005702 845-242KG0E-10) natural
gas stove that my wife just loves, but is in need of some repair.
Specifically, the spark igniters are not firing on all pistons, but the
burners work just fine if lit with a match.

Crown has been out of business for decades now.

Does anyone know where to buy parts, or retro-fit parts? *For instance,
I bet the same spark igniters were used on numerous makes and models of
stove, so there is likely something that will fit.

Thanks,

Joe Gwinn


"Not firing on all pistons" reminds me of when I would run my car
engine in the dark to look for sparks jumping from the ignition
wires. Have you looked for high voltage "leaking" with the top off?


I have, but by listening. This works better with a stove than an
engine. I suppose there is no harm in doing both at the same time on
the stove.


Elso, maybe you can contact these guys for help:
http://www.theignitorstore.com/catalog/norton_igniters/


Thanks - I'll check them out.

Joe Gwinn

[email protected] February 19th 17 02:38 AM

Crown Stoves - Repair Parts
 
On Thursday, June 21, 2012 at 7:50:05 PM UTC-5, Joseph Gwinn wrote:
I have a big old 6-burner Crown (model H3005702 845-242KG0E-10) natural
gas stove that my wife just loves, but is in need of some repair.
Specifically, the spark igniters are not firing on all pistons, but the
burners work just fine if lit with a match.

Crown has been out of business for decades now.

Does anyone know where to buy parts, or retro-fit parts? For instance,
I bet the same spark igniters were used on numerous makes and models of
stove, so there is likely something that will fit.


Thanks,

Joe Gwinn



Hi Joe,

Do you still have this stove? Does it work? Would you be willing to part with it? Would your wife??

I'd be interested in anything you can tell me about keeping it working. My Mom's is a similar model. It should really be replaced, but we can't find anything that has the same features (two ovens large enough to fit her pans) and that fit in that spot in the kitchen.

I'd appreciate any hints or tricks!

-- mmd

Joseph Gwinn February 19th 17 05:34 PM

Crown Stoves - Repair Parts
 
On Feb 18, 2017, wrote
(in ):

On Thursday, June 21, 2012 at 7:50:05 PM UTC-5, Joseph Gwinn wrote:
I have a big old 6-burner Crown (model H3005702 845-242KG0E-10) natural
gas stove that my wife just loves, but is in need of some repair.
Specifically, the spark igniters are not firing on all pistons, but the
burners work just fine if lit with a match.

Crown has been out of business for decades now.

Does anyone know where to buy parts, or retro-fit parts? For instance,
I bet the same spark igniters were used on numerous makes and models of
stove, so there is likely something that will fit.


Thanks,

Joe Gwinn


Hi Joe,

Do you still have this stove? Does it work? Would you be willing to part with
it? Would your wife??

I'd be interested in anything you can tell me about keeping it working. My
Mom's is a similar model. It should really be replaced, but we can't find
anything that has the same features (two ovens large enough to fit her pans)
and that fit in that spot in the kitchen.

I'd appreciate any hints or tricks!

-- mmd


Deckman,

My Crown does work, and is used every day. The clock/timer wore out years
ago, and was disconnected to prevent an annoying clicking sound.

Those Crown stoves are beasts straight from the 1950s. No electronics, so
they degrade slowly.

As for the failing igniters, the leftmost two burners rarely light on their
own, so we use a handheld spark igniter. A friend of my wife also has a
Crown, and she uses a handheld igniter for all burners. I can hear a spark,
but it is somewhere elsewhere than at the problem burners. Ive tried
tracking the spark sound with the stove top off, but have not yet found the
problem. Probably need to poke around with a stethoscope slowly, but have not
had the time. When found, this will be easily fixed.

What problems are you having? Have you found a suitable source of the spark
igniters et al? All my spark igniters seem to work in that one always hears a
spark, even if the burner doesnt light, but they wont last forever. I
did have one burner theat didnt work or make a spark sound. When I tok the
top off the stove and looked, I found that the control wire had worked its
way off the switch body on the burner control valve. Reconnected the wire
(push-on spade terminal) and the burner would light.

Do you have or know of any service documentation?

As for a possible sale, I can talk to the wife. Where do you live? (Im in
the Boston area.) Replacing the stove is by itself a big deal, and crating
and shipping the old stove well enough to survive shipping is also likely to
be a pretty big deal.

Joe Gwinn


Artemus[_4_] February 19th 17 07:52 PM

Crown Stoves - Repair Parts
 

"Joseph Gwinn" wrote in message
s.com...
On Feb 18, 2017, wrote
(in ):

On Thursday, June 21, 2012 at 7:50:05 PM UTC-5, Joseph Gwinn wrote:
I have a big old 6-burner Crown (model H3005702 845-242KG0E-10) natural
gas stove that my wife just loves, but is in need of some repair.
Specifically, the spark igniters are not firing on all pistons, but the
burners work just fine if lit with a match.

Crown has been out of business for decades now.

Does anyone know where to buy parts, or retro-fit parts? For instance,
I bet the same spark igniters were used on numerous makes and models of
stove, so there is likely something that will fit.


Thanks,

Joe Gwinn


Hi Joe,

Do you still have this stove? Does it work? Would you be willing to part with
it? Would your wife??

I'd be interested in anything you can tell me about keeping it working. My
Mom's is a similar model. It should really be replaced, but we can't find
anything that has the same features (two ovens large enough to fit her pans)
and that fit in that spot in the kitchen.

I'd appreciate any hints or tricks!

-- mmd


Deckman,

My Crown does work, and is used every day. The clock/timer wore out years
ago, and was disconnected to prevent an annoying clicking sound.

Those Crown stoves are beasts straight from the 1950s. No electronics, so
they degrade slowly.

As for the failing igniters, the leftmost two burners rarely light on their
own, so we use a handheld spark igniter. A friend of my wife also has a
Crown, and she uses a handheld igniter for all burners. I can hear a spark,
but it is somewhere elsewhere than at the problem burners. I've tried
tracking the spark sound with the stove top off, but have not yet found the
problem. Probably need to poke around with a stethoscope slowly, but have not
had the time. When found, this will be easily fixed.

What problems are you having? Have you found a suitable source of the spark
igniters et al? All my spark igniters seem to work in that one always hears a
spark, even if the burner doesn't light, but they won't last forever. I
did have one burner theat didn't work or make a spark sound. When I tok the
top off the stove and looked, I found that the control wire had worked its
way off the switch body on the burner control valve. Reconnected the wire
(push-on spade terminal) and the burner would light.

Do you have or know of any service documentation?

As for a possible sale, I can talk to the wife. Where do you live? (I'm in
the Boston area.) Replacing the stove is by itself a big deal, and crating
and shipping the old stove well enough to survive shipping is also likely to
be a pretty big deal.

Joe Gwinn


Have you tried these guys?
http://antiquevintageappliances.com/
Art



[email protected] February 19th 17 08:32 PM

Crown Stoves - Repair Parts
 
On Thursday, June 21, 2012 at 10:40:01 PM UTC-4, Denis G. wrote:
On Jun 21, 7:50Â*pm, Joseph Gwinn wrote:
I have a big old 6-burner Crown (model H3005702 845-242KG0E-10) natural
gas stove that my wife just loves, but is in need of some repair.
Specifically, the spark igniters are not firing on all pistons, but the
burners work just fine if lit with a match.

Crown has been out of business for decades now.

Does anyone know where to buy parts, or retro-fit parts? Â*For instance,
I bet the same spark igniters were used on numerous makes and models of
stove, so there is likely something that will fit.

Thanks,

Joe Gwinn


"Not firing on all pistons" reminds me of when I would run my car
engine in the dark to look for sparks jumping from the ignition
wires.


Imagine if cars had pilot lights. Ha!

James Waldby[_3_] February 19th 17 08:58 PM

Crown Stoves - Repair Parts
 
On Sun, 19 Feb 2017 12:32:21 -0800, mogulah wrote:
On Thursday, June 21, 2012 at 10:40:01 PM UTC-4, Denis G. wrote:
On Jun 21, 7:50Â*pm, Joseph Gwinn wrote:
I have a big old 6-burner Crown (model H3005702 845-242KG0E-10) natural
gas stove that my wife just loves, but is in need of some repair.
Specifically, the spark igniters are not firing on all pistons, but the
burners work just fine if lit with a match.

....
Does anyone know where to buy parts, or retro-fit parts? Â*For instance,
I bet the same spark igniters were used on numerous makes and models of
stove, so there is likely something that will fit.

....
"Not firing on all pistons" reminds me of when I would run my car
engine in the dark to look for sparks jumping from the ignition
wires.


Imagine if cars had pilot lights. Ha!


Stanley Steamers had a pilot flame, with pilot fuel like hexane vs
main fuels like kerosene. https://www.youtube.com/watch?v=OLgssxCjQNw
shows some people a couple of years ago trying to get the pilot going
on a 1910 Steamer, using a propane torch. I suspect owners back in
the day had some smoother ways of starting up.

--
jiw

Jim Wilkins[_2_] February 19th 17 10:44 PM

Crown Stoves - Repair Parts
 
"James Waldby" wrote in message
...
On Sun, 19 Feb 2017 12:32:21 -0800, mogulah wrote:
On Thursday, June 21, 2012 at 10:40:01 PM UTC-4, Denis G. wrote:
On Jun 21, 7:50 pm, Joseph Gwinn wrote:
I have a big old 6-burner Crown (model H3005702 845-242KG0E-10)
natural
gas stove that my wife just loves, but is in need of some
repair.
Specifically, the spark igniters are not firing on all pistons,
but the
burners work just fine if lit with a match.

...
Does anyone know where to buy parts, or retro-fit parts? For
instance,
I bet the same spark igniters were used on numerous makes and
models of
stove, so there is likely something that will fit.

...
"Not firing on all pistons" reminds me of when I would run my car
engine in the dark to look for sparks jumping from the ignition
wires.


Imagine if cars had pilot lights. Ha!


Stanley Steamers had a pilot flame, with pilot fuel like hexane vs
main fuels like kerosene.
https://www.youtube.com/watch?v=OLgssxCjQNw
shows some people a couple of years ago trying to get the pilot
going
on a 1910 Steamer, using a propane torch. I suspect owners back in
the day had some smoother ways of starting up.

--
jiw


https://en.wikipedia.org/wiki/Hot-tube_ignitor



Larry Jaques[_4_] February 20th 17 03:27 PM

Crown Stoves - Repair Parts
 
On Sun, 19 Feb 2017 20:58:18 -0000 (UTC), James Waldby
wrote:

On Sun, 19 Feb 2017 12:32:21 -0800, mogulah wrote:
On Thursday, June 21, 2012 at 10:40:01 PM UTC-4, Denis G. wrote:
On Jun 21, 7:50*pm, Joseph Gwinn wrote:
I have a big old 6-burner Crown (model H3005702 845-242KG0E-10) natural
gas stove that my wife just loves, but is in need of some repair.
Specifically, the spark igniters are not firing on all pistons, but the
burners work just fine if lit with a match.

...
Does anyone know where to buy parts, or retro-fit parts? *For instance,
I bet the same spark igniters were used on numerous makes and models of
stove, so there is likely something that will fit.

...
"Not firing on all pistons" reminds me of when I would run my car
engine in the dark to look for sparks jumping from the ignition
wires.


Imagine if cars had pilot lights. Ha!


Stanley Steamers had a pilot flame, with pilot fuel like hexane vs
main fuels like kerosene. https://www.youtube.com/watch?v=OLgssxCjQNw
shows some people a couple of years ago trying to get the pilot going
on a 1910 Steamer, using a propane torch. I suspect owners back in
the day had some smoother ways of starting up.


Perhaps so. I watched those guys trying to blow themselves up and the
next video on YT was Jay Leno with his boosted (30" upsized boiler vs
standard 26", fuel pressure. bumped from 140 to 180psi) Stanley
Steamer. He gives a great talk on how it all works, and shows their
work on baffles to equalize the flow to get more even burner heat.

Fascinating video, 2 thumbs up.
https://www.youtube.com/watch?v=5Me8b0ed59s

"When you're made of wood and you're on fire going 65mph down the
freeway...it's fascinating." Jay said.


Then, I followed his links to the Baker Electric car.
https://www.youtube.com/watch?v=OhnjMdzGusc

--
In order to become the master, the politician poses as the servant.
--Charles de Gaulle


RangersSuck February 20th 17 09:27 PM

Crown Stoves - Repair Parts
 
On Monday, February 20, 2017 at 10:27:22 AM UTC-5, Larry Jaques wrote:
On Sun, 19 Feb 2017 20:58:18 -0000 (UTC), James Waldby
wrote:

On Sun, 19 Feb 2017 12:32:21 -0800, mogulah wrote:
On Thursday, June 21, 2012 at 10:40:01 PM UTC-4, Denis G. wrote:
On Jun 21, 7:50Â*pm, Joseph Gwinn wrote:
I have a big old 6-burner Crown (model H3005702 845-242KG0E-10) natural
gas stove that my wife just loves, but is in need of some repair.
Specifically, the spark igniters are not firing on all pistons, but the
burners work just fine if lit with a match.

...
Does anyone know where to buy parts, or retro-fit parts? Â*For instance,
I bet the same spark igniters were used on numerous makes and models of
stove, so there is likely something that will fit.

...
"Not firing on all pistons" reminds me of when I would run my car
engine in the dark to look for sparks jumping from the ignition
wires.

Imagine if cars had pilot lights. Ha!


Stanley Steamers had a pilot flame, with pilot fuel like hexane vs
main fuels like kerosene. https://www.youtube.com/watch?v=OLgssxCjQNw
shows some people a couple of years ago trying to get the pilot going
on a 1910 Steamer, using a propane torch. I suspect owners back in
the day had some smoother ways of starting up.


Perhaps so. I watched those guys trying to blow themselves up and the
next video on YT was Jay Leno with his boosted (30" upsized boiler vs
standard 26", fuel pressure. bumped from 140 to 180psi) Stanley
Steamer. He gives a great talk on how it all works, and shows their
work on baffles to equalize the flow to get more even burner heat.

Fascinating video, 2 thumbs up.
https://www.youtube.com/watch?v=5Me8b0ed59s

"When you're made of wood and you're on fire going 65mph down the
freeway...it's fascinating." Jay said.


Then, I followed his links to the Baker Electric car.
https://www.youtube.com/watch?v=OhnjMdzGusc

--
In order to become the master, the politician poses as the servant.
--Charles de Gaulle


There's been a Jay Leno's Garage marathon all day today on CNBC. Fun show.

[email protected] November 8th 17 01:45 PM

Crown Stoves - Repair Parts
 

I have the same American Crown 6 burner stove that doesn't light without me physically lighting it. I have the double oven, but the temperatures are kind of out of whack. I need it repaired, but American Crown is out of business. Does anyone have any suggestions on how I can get this fixed before Thanksgiving?

Thanks
Jill


Larry Jaques[_4_] November 8th 17 05:47 PM

Crown Stoves - Repair Parts
 
On Wed, 8 Nov 2017 05:45:34 -0800 (PST), wrote:


I have the same American Crown 6 burner stove that doesn't light without me physically lighting it. I have the double oven, but the temperatures are kind of out of whack. I need it repaired, but American Crown is out of business. Does anyone have any suggestions on how I can get this fixed before Thanksgiving?


Jill, most appliance repairmen may be able to get the part. I believe
they're called a "starter" for electronically lit burners and "pilot
generator" for the old pilot-flamed models. If they have trouble, try
http://www.stovelady.com/partsordering.php

I had a gas Merrit and O'Keefe DeVille 4 burner with chrome griddle in
the middle, a fully adjustable height broiler on the left, and stove
on the right. Great old beastie from the '20s. Had it re-orificed
for propane by a plumber who installed the gas line.

--
In reality, serendipity accounts for one percent of the blessings
we receive in life, work and love. The other 99 percent is due to
our efforts.
-- Peter McWilliams

Artemus[_4_] November 8th 17 07:36 PM

Crown Stoves - Repair Parts
 

wrote in message ...

I have the same American Crown 6 burner stove that doesn't light without me physically lighting it.
I have the double oven, but the temperatures are kind of out of whack. I need it repaired, but
American Crown is out of business. Does anyone have any suggestions on how I can get this fixed
before Thanksgiving?

Thanks
Jill

Another source for parts and repair is
http://www.antiquevintageappliances....ue_stoves.html
they are in Tucson and some of my friends highly reccommend them.

good luck.
Art



Jon Elson[_3_] November 8th 17 07:59 PM

Crown Stoves - Repair Parts
 
wrote:


I have the same American Crown 6 burner stove that doesn't light without
me physically lighting it. I have the double oven, but the temperatures
are kind of out of whack. I need it repaired, but American Crown is out of
business. Does anyone have any suggestions on how I can get this fixed
before Thanksgiving?

Always worth a call to Marcone, they have parts for all kinds of old
appliances. We have a 42-year old stove top, they still have all the parts
for it! Marcone is a national chain of appliance parts dealers. They do
sell to the public.

Jon

Neon John November 9th 17 06:30 PM

Crown Stoves - Repair Parts
 
On Wed, 8 Nov 2017 11:36:44 -0800, "Artemus"
wrote:


Another source for parts and repair is
http://www.antiquevintageappliances....ue_stoves.html
they are in Tucson and some of my friends highly reccommend them.


Website says "not currently selling parts." Rats.

John

John DeArmond
http://www.neon-john.com
http://www.tnduction.com
Tellico Plains, Occupied TN
See website for email address



All times are GMT +1. The time now is 06:19 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter