Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Pneumatic flow control valve problem
I have a flow control valve like this:
http://www.grainger.com/Grainger/PAR...789?Pid=search It controls the speed of a 2x10 cylinder and the movement of the cylinder and mechanism is making the adjustment knob move so the cylinder gets faster and faster. It does have a set screw that will lock the adjustment knob but the operator needs to change it often and during the stroke. Is there a simple way to stiffen the knob without locking it? (Yes, I could get a new one.) |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Another pneumatic valve trouble | Metalworking | |||
Another pneumatic valve trouble | Metalworking | |||
Valve,Butterfly valve,Globe valve,Check valve,Ball valve,Plug valve,Marine valve,Gate valve,Flow control valve | UK diy | |||
Gas control valve problem | UK diy | |||
CH control upgrade: valve & circulation direction problem. | UK diy |