Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Monarch Series 61 rebuild
On Mon, 06 Feb 2012 23:04:31 -0600, Jon Elson
wrote: Ned Simmons wrote: I believe I offered up my LeBlond for sale here last spring when I purchased a Monarch 61. I've been using the Monarch for several months, but only recently got the controls finished. Up 'til now it's been running on a rotary converter -- sure is nice not to have to listen to it anymore. Some before, during, and after pics. http://www.nedsim.com/Monarch61Rebuild/index.html Hmmm, looks like a fairly short bed, but very NICE! Is that a D1-6 spindle? Jon Yes, D1-6. When I started looking I was surprised to see that the 30" center distance was very common for that model, and space is tight here. Many of the 61s must have been purchased for tool room work. The other lathe I considered was the Okuma LS, but they're rare in short beds, and even rarer with a short bed and D spindle. I do wish the Monarch had a hole thru bigger than 1-9/16". -- Ned Simmons |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Monarch Series 61 rebuild
Ned Simmons wrote:
Yes, D1-6. When I started looking I was surprised to see that the 30" center distance was very common for that model, and space is tight here. Many of the 61s must have been purchased for tool room work. The other lathe I considered was the Okuma LS, but they're rare in short beds, and even rarer with a short bed and D spindle. I do wish the Monarch had a hole thru bigger than 1-9/16". Interesting. My Sheldon R15-6 has a 2.25" spindle through hole with a D1-6 mount. I guess the bearings on the Sheldon are bigger (they look HUGE to me!) The 6' bed on mine gives roughly 42" between centers. I know the tailstock could be allowed to overhang a bit to get slightly more, if I should ever need it. Jon |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Monarch Series 61 rebuild
On Tue, 07 Feb 2012 15:11:21 -0600, Jon Elson
wrote: Ned Simmons wrote: Yes, D1-6. When I started looking I was surprised to see that the 30" center distance was very common for that model, and space is tight here. Many of the 61s must have been purchased for tool room work. The other lathe I considered was the Okuma LS, but they're rare in short beds, and even rarer with a short bed and D spindle. I do wish the Monarch had a hole thru bigger than 1-9/16". Interesting. My Sheldon R15-6 has a 2.25" spindle through hole with a D1-6 mount. I guess the bearings on the Sheldon are bigger (they look HUGE to me!) If you look at the pic of the headstock guts you can see how the spindle tail steps down to about 2-1/4" OD outside the headstock. Between the step and the nose there's nothing to prevent the hole being much larger. Maybe Monarch figured you should buy one of their big lathes if you wanted a big hole thru. Excepting the 10EE, I think this was the smallest lathe Monarch was building at the time. The 6' bed on mine gives roughly 42" between centers. I know the tailstock could be allowed to overhang a bit to get slightly more, if I should ever need it. Jon 36" would fit between centers in a pinch. -- Ned Simmons |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
Monarch Series 61 rebuild
Ned Simmons wrote:
If you look at the pic of the headstock guts you can see how the spindle tail steps down to about 2-1/4" OD outside the headstock. Between the step and the nose there's nothing to prevent the hole being much larger. Maybe Monarch figured you should buy one of their big lathes if you wanted a big hole thru. Excepting the 10EE, I think this was the smallest lathe Monarch was building at the time. Yup. most of the Monarchs I have seen were pretty big! Lovely machines, too - they just LOOK good. Jon |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Monarch Series 61 rebuild | Metalworking | |||
Monarch Series 61 rebuild | Metalworking | |||
Monarch Series 61 rebuild | Metalworking |