DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Metalworking (https://www.diybanter.com/metalworking/)
-   -   Forklift parking brake (https://www.diybanter.com/metalworking/333149-forklift-parking-brake.html)

Ignoramus8437 December 17th 11 11:14 PM

Forklift parking brake
 
I have a Cat V50B outdoor forklift.

It has a parking brake that has a cable going into the transmission.

The brake does not work.

How do those brakes function? Are they easy to fix?

i

Lloyd E. Sponenburgh[_3_] December 18th 11 12:39 AM

Forklift parking brake
 
Ignoramus8437 fired this volley in
:

It has a parking brake that has a cable going into the transmission.

The brake does not work.

How do those brakes function? Are they easy to fix?


They are usually a drum with a band around the outside, rather than shoes
inside.

No matter what, it takes opening the case to fix, unless the cable is
mis-adjusted. Try that first.

LLoyd

Ignoramus8437 December 18th 11 01:37 AM

Forklift parking brake
 
On 2011-12-18, Lloyd E. Sponenburgh lloydspinsidemindspring.com wrote:
Ignoramus8437 fired this volley in
:

It has a parking brake that has a cable going into the transmission.

The brake does not work.

How do those brakes function? Are they easy to fix?


They are usually a drum with a band around the outside, rather than shoes
inside.

No matter what, it takes opening the case to fix, unless the cable is
mis-adjusted. Try that first.

LLoyd


Thanks, I will check the cable first...

i

Larry Jaques[_4_] December 18th 11 12:38 PM

Forklift parking brake
 
On Sat, 17 Dec 2011 19:37:49 -0600, Ignoramus8437
wrote:

On 2011-12-18, Lloyd E. Sponenburgh lloydspinsidemindspring.com wrote:
Ignoramus8437 fired this volley in
:

It has a parking brake that has a cable going into the transmission.

The brake does not work.

How do those brakes function? Are they easy to fix?


They are usually a drum with a band around the outside, rather than shoes
inside.

No matter what, it takes opening the case to fix, unless the cable is
mis-adjusted. Try that first.

LLoyd


Thanks, I will check the cable first...


Better check the lining on the band, too. Once it's worn out, use of
the brake starts putting steel on steel, ruining the drum. The glue,
which holds the brake lining to the steel band, debonds somewhat
frequently over age, so portions of the lining material could be
missing.

--
If you're trying to take a roomful of people by
surprise, it's a lot easier to hit your targets
if you don't yell going through the door.
-- Lois McMaster Bujold

Ignoramus4358 December 18th 11 01:25 PM

Forklift parking brake
 
On 2011-12-18, Paul Drahn wrote:
On 12/17/2011 3:14 PM, Ignoramus8437 wrote:
I have a Cat V50B outdoor forklift.

It has a parking brake that has a cable going into the transmission.

The brake does not work.

How do those brakes function? Are they easy to fix?

i

On mine, there is a switch on the parking brake lever that disables the
starter unless the brake is set. Is yours that way?


No, this seems like a new age safety feature, this forklift has none
of that.

i

Ignoramus4358 December 18th 11 01:25 PM

Forklift parking brake
 
On 2011-12-18, Larry Jaques wrote:
On Sat, 17 Dec 2011 19:37:49 -0600, Ignoramus8437
wrote:

On 2011-12-18, Lloyd E. Sponenburgh lloydspinsidemindspring.com wrote:
Ignoramus8437 fired this volley in
:

It has a parking brake that has a cable going into the transmission.

The brake does not work.

How do those brakes function? Are they easy to fix?

They are usually a drum with a band around the outside, rather than shoes
inside.

No matter what, it takes opening the case to fix, unless the cable is
mis-adjusted. Try that first.

LLoyd


Thanks, I will check the cable first...


Better check the lining on the band, too. Once it's worn out, use of
the brake starts putting steel on steel, ruining the drum. The glue,
which holds the brake lining to the steel band, debonds somewhat
frequently over age, so portions of the lining material could be
missing.


I would have to open the transmission for that, right?

i

Larry Jaques[_4_] December 18th 11 03:38 PM

Forklift parking brake
 
On Sun, 18 Dec 2011 07:25:42 -0600, Ignoramus4358
wrote:

On 2011-12-18, Larry Jaques wrote:
On Sat, 17 Dec 2011 19:37:49 -0600, Ignoramus8437
wrote:

On 2011-12-18, Lloyd E. Sponenburgh lloydspinsidemindspring.com wrote:
Ignoramus8437 fired this volley in
:

It has a parking brake that has a cable going into the transmission.

The brake does not work.

How do those brakes function? Are they easy to fix?

They are usually a drum with a band around the outside, rather than shoes
inside.

No matter what, it takes opening the case to fix, unless the cable is
mis-adjusted. Try that first.

LLoyd

Thanks, I will check the cable first...


Better check the lining on the band, too. Once it's worn out, use of
the brake starts putting steel on steel, ruining the drum. The glue,
which holds the brake lining to the steel band, debonds somewhat
frequently over age, so portions of the lining material could be
missing.


I would have to open the transmission for that, right?


Oops, yeah. All the parking brakes I've seen have been on the OUTSIDE
of the tail housing, but those have been on other equipment and cars,
not forklifts.

It might be that you can take cover off easily. Cross your fingers and
hope so.

I take it that you haven't yet found a service and repair manual.
Everyone needs the manual for their vehicles, if only to keep their
service people honest when they can't do repairs themselves. Have you
checked the site for one? bseg


--
If you're trying to take a roomful of people by
surprise, it's a lot easier to hit your targets
if you don't yell going through the door.
-- Lois McMaster Bujold

Lloyd E. Sponenburgh[_3_] December 18th 11 04:53 PM

Forklift parking brake
 
Larry Jaques fired this volley in
:


It might be that you can take cover off easily. Cross your fingers and
hope so.


Usually, as Larry said, they're on the tail-end of the tranny, outside, and
working dry. So this is probably a wet brake. Since it's a wear part,
likely there IS an access hatch to get to it.

LLoyd

[email protected] December 19th 11 02:50 AM

Forklift parking brake
 
Larry Jaques wrote:
...you... [ain't got] a service and repair manual[?]
Have you checked the[ir] site for one? bseg


x2 :D

Y U No Got Service Manual? :D

Alvin in AZ

Larry Jaques[_4_] December 19th 11 05:25 AM

Forklift parking brake
 
On Mon, 19 Dec 2011 02:50:50 +0000 (UTC), wrote:

Larry Jaques wrote:
...you... [ain't got] a service and repair manual[?]
Have you checked the[ir] site for one? bseg


x2 :D

Y U No Got Service Manual? :D

Alvin in AZ


I had written "your site" to Ig but decided to write the URL instead,
then got sidetracked and forgot to paste it in.
www.liberatedmanuals.com is Ig's site but the military may have never
used his machine.

--
If you're trying to take a roomful of people by
surprise, it's a lot easier to hit your targets
if you don't yell going through the door.
-- Lois McMaster Bujold

Steve B[_13_] December 19th 11 05:42 AM

Forklift parking brake
 

"Ignoramus8437" wrote in message
...
I have a Cat V50B outdoor forklift.

It has a parking brake that has a cable going into the transmission.

The brake does not work.

How do those brakes function? Are they easy to fix?

i


I'd say it's a band around a drum, like on a winch. The brake assembly
isn't complicated, but getting to it might be.

Steve




All times are GMT +1. The time now is 04:12 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter