DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Metalworking (https://www.diybanter.com/metalworking/)
-   -   FS/Trade Gorton Quickchange tool holders (https://www.diybanter.com/metalworking/322407-fs-trade-gorton-quickchange-tool-holders.html)

Gunner Asch[_6_] April 29th 11 09:04 AM

FS/Trade Gorton Quickchange tool holders
 
Got one of these?

http://gorton-machine.org:8080/forms...0g/page20.html

Ive got 15+ extra holders. Most are .500, a few are .375

Ive also got a spare NMTB 30, QuickChange Chuck I could sell.

All holders are in excellent condition as is the extra chuck.

$5 per holder, $50 OBO for the chuck

Swap, trade, cash

Gunner

--
"If I say two plus two is four and a Democrat says two plus two is eight,
it's not a partial victory for me when we agree that two plus two is
six. " Jonah Goldberg (modified)

[email protected] December 18th 13 11:45 PM

FS/Trade Gorton Quickchange tool holders
 
Did you ever sell the quick change gorton chuck? Is it a set and is it complete? Or just the chuck? Do you have the locking nut?

Let me know please.
Thanks, Geoff
is my email if you have it and can send me a picture.

DoN. Nichols[_2_] December 20th 13 02:49 AM

FS/Trade Gorton Quickchange tool holders
 
On 2013-12-18, wrote:

Did you ever sell the quick change gorton chuck? Is it a set and is it
complete? Or just the chuck? Do you have the locking nut?

Let me know please.
Thanks, Geoff
is my email if you have it and can send me a picture.

Hmm ... posted through Googlegroups, so he may not even know
that this is really a usenet newsgroup.

And posted as though it is a response to an individual, instead
of a world-wide newsgroup.

And he may have found some posting years old. I don't remember
a Gorton chuck being offered anywhen recently.

And no clue who actually posted the article, so we don't know
whether he is even still active in this newsgroup.

I would say that the odds of a positive response are pretty
slim under those conditions. :-)

Perhaps he should go back and find what the date was that is was
posted, and who actually posted it. :-) With that information, maybe you
can get the attention of the person who originally posted it -- or can
be told that he no longer is active in this newsgroup.

Good luck,
DoN.

--
Remove oil spill source from e-mail
Email: | (KV4PH) Voice (all times): (703) 938-4564
(too) near Washington D.C. |
http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---

Gunner Asch[_6_] December 21st 13 09:09 PM

FS/Trade Gorton Quickchange tool holders
 
On Wed, 18 Dec 2013 15:45:53 -0800 (PST),
wrote:

Did you ever sell the quick change gorton chuck? Is it a set and is it complete? Or just the chuck? Do you have the locking nut?

Let me know please.
Thanks, Geoff
is my email if you have it and can send me a picture.


Which one? 40 Taper?

https://picasaweb.google.com/1040422...16528413815378

When did I post that ad? 3 yrs ago?

Gunner

--
"Owning a sailboat is like marrying a nymphomaniac. You don’t want to do that
but it is great if your best friend does. That way you get all the benefits without any of the upkeep"

---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com


Gunner Asch[_6_] December 21st 13 09:10 PM

FS/Trade Gorton Quickchange tool holders
 
On 20 Dec 2013 02:49:00 GMT, "DoN. Nichols"
wrote:

On 2013-12-18, wrote:

Did you ever sell the quick change gorton chuck? Is it a set and is it
complete? Or just the chuck? Do you have the locking nut?

Let me know please.
Thanks, Geoff
is my email if you have it and can send me a picture.

Hmm ... posted through Googlegroups, so he may not even know
that this is really a usenet newsgroup.

And posted as though it is a response to an individual, instead
of a world-wide newsgroup.

And he may have found some posting years old. I don't remember
a Gorton chuck being offered anywhen recently.

And no clue who actually posted the article, so we don't know
whether he is even still active in this newsgroup.

I would say that the odds of a positive response are pretty
slim under those conditions. :-)

Perhaps he should go back and find what the date was that is was
posted, and who actually posted it. :-) With that information, maybe you
can get the attention of the person who originally posted it -- or can
be told that he no longer is active in this newsgroup.

Good luck,
DoN.


I think I posted that at least 3 yrs ago. Here ...I think....

Shrug

Gunner

--
"Owning a sailboat is like marrying a nymphomaniac. You don’t want to do that
but it is great if your best friend does. That way you get all the benefits without any of the upkeep"

---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com



All times are GMT +1. The time now is 09:05 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter