|
Removing Morse Taper Chuck Video
33 second video...
http://www.youtube.com/watch?v=rJ3jyEbcse4 I'm working on a bunch of "how to" videos. Any tips from those who use such machines? This was one of our first tries a few months back... Regards, Joe Agro, Jr. (800) 871-5022 01.908.542.0244 Automatic / Pneumatic Drills: http://www.AutoDrill.com Multiple Spindle Drills: http://www.Multi-Drill.com Production Tapping: http://Production-Tapping-Equipment.com/ Flagship Site: http://www.Drill-N-Tap.com VIDEOS: http://www.youtube.com/user/AutoDrill TWITTER: http://twitter.com/AutoDrill FACEBOOK: http://www.facebook.com/AutoDrill V8013-R |
Removing Morse Taper Chuck Video
"Joe AutoDrill" wrote in message
... 33 second video... http://www.youtube.com/watch?v=rJ3jyEbcse4 I'm working on a bunch of "how to" videos. Any tips from those who use such machines? This was one of our first tries a few months back... Might mention that those lever action removal tools are a waste of time and money. |
Removing Morse Taper Chuck Video
Joe AutoDrill wrote:
33 second video... http://www.youtube.com/watch?v=rJ3jyEbcse4 I'm working on a bunch of "how to" videos. Any tips from those who use such machines? This was one of our first tries a few months back... "A public service from Joe AutoDrill". Good on you. But it seems to me that the crucial bit is how the drift fits in the quill. A camera shot of the quill opening and how the spindle might need to be rotated would add a lot. Bob |
Removing Morse Taper Chuck Video
Might mention that those lever action removal tools are a waste of time
and money. I've never even heard of such devices... I suppose that's a good thing based on your comment. :) Regards, Joe Agro, Jr. (800) 871-5022 01.908.542.0244 Automatic / Pneumatic Drills: http://www.AutoDrill.com Multiple Spindle Drills: http://www.Multi-Drill.com Production Tapping: http://Production-Tapping-Equipment.com/ Flagship Site: http://www.Drill-N-Tap.com VIDEOS: http://www.youtube.com/user/AutoDrill TWITTER: http://twitter.com/AutoDrill FACEBOOK: http://www.facebook.com/AutoDrill V8013-R |
Removing Morse Taper Chuck Video
"A public service from Joe AutoDrill". Good on you. But it seems to me
that the crucial bit is how the drift fits in the quill. A camera shot of the quill opening and how the spindle might need to be rotated would add a lot. I thought the same thing when I watched it again today... Maybe I'll do a short follow-up showing just that step. -- Regards, Joe Agro, Jr. (800) 871-5022 01.908.542.0244 Automatic / Pneumatic Drills: http://www.AutoDrill.com Multiple Spindle Drills: http://www.Multi-Drill.com Production Tapping: http://Production-Tapping-Equipment.com/ Flagship Site: http://www.Drill-N-Tap.com VIDEOS: http://www.youtube.com/user/AutoDrill TWITTER: http://twitter.com/AutoDrill FACEBOOK: http://www.facebook.com/AutoDrill V8013-R |
Removing Morse Taper Chuck Video
On Tue, 12 Apr 2011 11:05:20 -0400, "Joe AutoDrill"
wrote: 33 second video... http://www.youtube.com/watch?v=rJ3jyEbcse4 I'm working on a bunch of "how to" videos. Any tips from those who use such machines? This was one of our first tries a few months back... i noticed your operator has three hands. Most of us are not so blessed. I'd suggest a video of how a two hander does it. Karl |
Removing Morse Taper Chuck Video
"Bob Engelhardt" wrote in message ... Joe AutoDrill wrote: 33 second video... http://www.youtube.com/watch?v=rJ3jyEbcse4 I'm working on a bunch of "how to" videos. Any tips from those who use such machines? This was one of our first tries a few months back... "A public service from Joe AutoDrill". Good on you. But it seems to me that the crucial bit is how the drift fits in the quill. A camera shot of the quill opening and how the spindle might need to be rotated would add a lot. It appears he is using a drift that is the wrong size.. -the proper size will have contact with both sides of the spindle slot as well as the tooling tang thus providing 3 solid contact points prior to strikng with the mallet. -- |
Removing Morse Taper Chuck Video
On 4/12/2011 10:09 AM, Karl Townsend wrote:
On Tue, 12 Apr 2011 11:05:20 -0400, "Joe AutoDrill" wrote: 33 second video... http://www.youtube.com/watch?v=rJ3jyEbcse4 I'm working on a bunch of "how to" videos. Any tips from those who use such machines? This was one of our first tries a few months back... i noticed your operator has three hands. Most of us are not so blessed. I'd suggest a video of how a two hander does it. Karl Right, Karl. I do with two hands and an elbow on my Grizzly drill press. Thumb on one hand holds the drift, fingers hold the drill bit or chuck, elbow holds the three legged wheel, and the left hand holds the hammer to whack the drift. Paul |
Removing Morse Taper Chuck Video
"Joe AutoDrill" wrote in message ... 33 second video... http://www.youtube.com/watch?v=rJ3jyEbcse4 I'm working on a bunch of "how to" videos. Any tips from those who use such machines? This was one of our first tries a few months back... Regards, Joe Agro, Jr. (800) 871-5022 01.908.542.0244 Automatic / Pneumatic Drills: http://www.AutoDrill.com Multiple Spindle Drills: http://www.Multi-Drill.com Production Tapping: http://Production-Tapping-Equipment.com/ Flagship Site: http://www.Drill-N-Tap.com VIDEOS: http://www.youtube.com/user/AutoDrill TWITTER: http://twitter.com/AutoDrill FACEBOOK: http://www.facebook.com/AutoDrill V8013-R I keep a taper drift welded onto the end of a small homemade slide hammer.It will only take a half hour and some of the stuff in your scrap box and will sve you a lot of time. As you can hold the chuck with one hand and slide the hammer with the other it saves you winding the table up to catch the chuck when it falls out. |
Removing Morse Taper Chuck Video
On Wed, 13 Apr 2011 14:53:43 +1000, "Grumpy"
wrote: "Joe AutoDrill" wrote in message ... 33 second video... http://www.youtube.com/watch?v=rJ3jyEbcse4 I'm working on a bunch of "how to" videos. Any tips from those who use such machines? This was one of our first tries a few months back... Regards, Joe Agro, Jr. (800) 871-5022 01.908.542.0244 Automatic / Pneumatic Drills: http://www.AutoDrill.com Multiple Spindle Drills: http://www.Multi-Drill.com Production Tapping: http://Production-Tapping-Equipment.com/ Flagship Site: http://www.Drill-N-Tap.com VIDEOS: http://www.youtube.com/user/AutoDrill TWITTER: http://twitter.com/AutoDrill FACEBOOK: http://www.facebook.com/AutoDrill V8013-R I keep a taper drift welded onto the end of a small homemade slide hammer.It will only take a half hour and some of the stuff in your scrap box and will sve you a lot of time. As you can hold the chuck with one hand and slide the hammer with the other it saves you winding the table up to catch the chuck when it falls out. I remember seeing commercially made versions of this sort of tool in various shops. Never bothered to read the inscription so have no idea who made them (maybe Morse :-) but they were quite common. Cheers, John D. Slocomb (jdslocombatgmail) |
Removing Morse Taper Chuck Video
On Tue, 12 Apr 2011 11:05:20 -0400, "Joe AutoDrill"
wrote: 33 second video... http://www.youtube.com/watch?v=rJ3jyEbcse4 I'm working on a bunch of "how to" videos. Any tips from those who use such machines? This was one of our first tries a few months back... Thanks for the public service. One I'd like to see is removing a chuck from its arbor. RWL |
| All times are GMT +1. The time now is 10:46 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter