DIYbanter - bending pipe/tubing

DIYbanter (https://www.diybanter.com/)

- Metalworking (https://www.diybanter.com/metalworking/)

- - bending pipe/tubing (https://www.diybanter.com/metalworking/319582-re-bending-pipe-tubing.html)

KD7HB

March 1st 11 09:27 PM

bending pipe/tubing

If it were mine, I would not attempt to bend. I would cut the tubing at 45 degrees and braze the ends together. Then clean. primer and epoxy paint the things.

Paul

All times are GMT +1. The time now is 06:04 PM.