Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
ERNICRMO-10 alloy, can join any ferrous anything?
On Tue, 21 Dec 2010 14:24:40 -0600, Ignoramus1592
wrote: A couple of 30 lb spools of ERNICRMO-10 accidentally followed me home. http://www.techalloy.com/_assets/nic...challoy622.pdf It is a alloy of 60% nickel, 21% chrome, 13% molybdenum. After reading the above pdf, and some other things, it seems that this mig wire can join pretty much anything ferrous to anything ferrous, or inconel, right? Say, stainless to high carbon, high carbon to inconel, high to low carbon, etc? So if I have two pieces and I have no clue, I can reliably weld them with this mig wire? Just how nasty is it to health, as far as fumes are concerned? i Inconel 625 (ERNiCrMo-3) is the alloy usually considered the best choice for joining unidentified and/or dissimilar ferrous and nickel based metals, but I would think 622 would work in most cases. Special Metals has a good brochure on joining nickel alloys, which includes a good table of recommended rods for dissimilar metals. http://www.specialmetals.com/documen...(Oct%2003).pdf -- Ned Simmons |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
ERNICRMO-10 alloy, can join any ferrous anything?
On 2010-12-22, Ned Simmons wrote:
On Tue, 21 Dec 2010 14:24:40 -0600, Ignoramus1592 wrote: A couple of 30 lb spools of ERNICRMO-10 accidentally followed me home. http://www.techalloy.com/_assets/nic...challoy622.pdf It is a alloy of 60% nickel, 21% chrome, 13% molybdenum. After reading the above pdf, and some other things, it seems that this mig wire can join pretty much anything ferrous to anything ferrous, or inconel, right? Say, stainless to high carbon, high carbon to inconel, high to low carbon, etc? So if I have two pieces and I have no clue, I can reliably weld them with this mig wire? Just how nasty is it to health, as far as fumes are concerned? i Inconel 625 (ERNiCrMo-3) is the alloy usually considered the best choice for joining unidentified and/or dissimilar ferrous and nickel based metals, but I would think 622 would work in most cases. Special Metals has a good brochure on joining nickel alloys, which includes a good table of recommended rods for dissimilar metals. http://www.specialmetals.com/documen...(Oct%2003).pdf Very nice manual, thanks |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
ERNICRMO-10 alloy, can join any ferrous anything? | Metalworking | |||
Gold Ferrous | Metalworking | |||
seeking malleable non-ferrous wire | UK diy | |||
Where to buy ferrous sulphate? | Woodworking | |||
Is tungsten carbide ferrous? | Metalworking |