FF - "Machinist's Workshop"
 

Free - 7 issues "Machinist's Workshop" (June/July 2009 thru June/July
2010). MW is a lower level than Home Shop Machinist. I.e., it assumes
the reader is a lot less skilled.

Plus shipping (3 lbs Media Mail from 01741). Or any other USPS mode
that you want to pay for G.

Bob

FF - "Machinist's Workshop"
 

On Fri, 03 Dec 2010 14:41:54 -0500, Bob Engelhardt
wrote:

Free - 7 issues "Machinist's Workshop" (June/July 2009 thru June/July
2010). MW is a lower level than Home Shop Machinist. I.e., it assumes
the reader is a lot less skilled.

Plus shipping (3 lbs Media Mail from 01741). Or any other USPS mode
that you want to pay for G.

Bob, I'd love to get those. Still available?
remove "invalid" to use email address

Thanks!

I spent an enjoyable morning with an ex-Wreck.Metalhead, Glenn Neff. I
bought that 3,000# winch from HF last week and found scraps to piece
together for the receiver holder today. Glenn had some pieces of 1/4"
stainless sheet and his plasma cutter went through it like butter
after I laid it out with a sharpie. Dayam, those things are nice.

He ground off the plasma swarf while I drilled and deburred the
mounting holes, drilled the hole for the retaining pin, and we mig
welded it onto the scrap piece of receiver tubing (after removing the
stud which had been welded onto it.)

All I have to do now is degrease and paint the receiver hitch

I haven't yet run the wiring for the winch, so that's up this weekend,
too, if it doesn't start raining again.

--
"Human nature itself is evermore an advocate for liberty.
There is also in human nature a resentment of injury, and
indignation against wrong. A love of truth and a veneration
of virtue. These amiable passions, are the latent spark. If
the people are capable of understanding, seeing and feeling
the differences between true and false, right and wrong,
virtue and vice, to what better principle can the friends of
mankind apply than to the sense of this difference?"
--John Adams

FF - "Machinist's Workshop"
 

Larry Jaques wrote:
On Fri, 03 Dec 2010 14:41:54 -0500, Bob Engelhardt
wrote:

Free - 7 issues "Machinist's Workshop" (June/July 2009 thru June/July
2010). MW is a lower level than Home Shop Machinist. I.e., it assumes
the reader is a lot less skilled.

Plus shipping (3 lbs Media Mail from 01741). Or any other USPS mode
that you want to pay forG.

Bob, I'd love to get those. Still available?
remove "invalid" to use email address

Thanks!

If figures you'd beat me to it! ;)

Bill

FF - "Machinist's Workshop"
 

On Fri, 03 Dec 2010 20:01:55 -0500, Bill wrote:

Larry Jaques wrote:
On Fri, 03 Dec 2010 14:41:54 -0500, Bob Engelhardt
wrote:

Free - 7 issues "Machinist's Workshop" (June/July 2009 thru June/July
2010). MW is a lower level than Home Shop Machinist. I.e., it assumes
the reader is a lot less skilled.

Plus shipping (3 lbs Media Mail from 01741). Or any other USPS mode
that you want to pay forG.

Bob, I'd love to get those. Still available?
remove "invalid" to use email address

Thanks!

If figures you'd beat me to it! ;)

Yessssssssss! I got home from my metalworking/HF cruise just in time,
it appears.


--
"Human nature itself is evermore an advocate for liberty.
There is also in human nature a resentment of injury, and
indignation against wrong. A love of truth and a veneration
of virtue. These amiable passions, are the latent spark. If
the people are capable of understanding, seeing and feeling
the differences between true and false, right and wrong,
virtue and vice, to what better principle can the friends of
mankind apply than to the sense of this difference?"
--John Adams

FF - "Machinist's Workshop"
 

On Fri, 03 Dec 2010 14:43:58 -0800, Larry Jaques
wrote:

On Fri, 03 Dec 2010 14:41:54 -0500, Bob Engelhardt
wrote:

Free - 7 issues "Machinist's Workshop" (June/July 2009 thru June/July
2010). MW is a lower level than Home Shop Machinist. I.e., it assumes
the reader is a lot less skilled.

Plus shipping (3 lbs Media Mail from 01741). Or any other USPS mode
that you want to pay for G.

Bob, I'd love to get those. Still available?
remove "invalid" to use email address

Thanks!

I spent an enjoyable morning with an ex-Wreck.Metalhead, Glenn Neff. I
bought that 3,000# winch from HF last week and found scraps to piece
together for the receiver holder today. Glenn had some pieces of 1/4"
stainless sheet and his plasma cutter went through it like butter
after I laid it out with a sharpie. Dayam, those things are nice.

He ground off the plasma swarf while I drilled and deburred the
mounting holes, drilled the hole for the retaining pin, and we mig
welded it onto the scrap piece of receiver tubing (after removing the
stud which had been welded onto it.)

Did you use stainless filler wire, or ordinary steel? What gas?

FF - "Machinist's Workshop"
 

On Fri, 03 Dec 2010 22:16:43 -0600, Don Foreman
wrote:

On Fri, 03 Dec 2010 14:43:58 -0800, Larry Jaques
wrote:

On Fri, 03 Dec 2010 14:41:54 -0500, Bob Engelhardt
wrote:

Free - 7 issues "Machinist's Workshop" (June/July 2009 thru June/July
2010). MW is a lower level than Home Shop Machinist. I.e., it assumes
the reader is a lot less skilled.

Plus shipping (3 lbs Media Mail from 01741). Or any other USPS mode
that you want to pay for G.

Bob, I'd love to get those. Still available?
remove "invalid" to use email address

Thanks!

I spent an enjoyable morning with an ex-Wreck.Metalhead, Glenn Neff. I
bought that 3,000# winch from HF last week and found scraps to piece
together for the receiver holder today. Glenn had some pieces of 1/4"
stainless sheet and his plasma cutter went through it like butter
after I laid it out with a sharpie. Dayam, those things are nice.

He ground off the plasma swarf while I drilled and deburred the
mounting holes, drilled the hole for the retaining pin, and we mig
welded it onto the scrap piece of receiver tubing (after removing the
stud which had been welded onto it.)

Did you use stainless filler wire, or ordinary steel? What gas?

Ordinary and straight argon, I believe. Forgot to ask. He thought it
might weld OK but wasn't sure. I let him do the honors and it came out
nicely. Miller 175, Sweet.

--
"Human nature itself is evermore an advocate for liberty.
There is also in human nature a resentment of injury, and
indignation against wrong. A love of truth and a veneration
of virtue. These amiable passions, are the latent spark. If
the people are capable of understanding, seeing and feeling
the differences between true and false, right and wrong,
virtue and vice, to what better principle can the friends of
mankind apply than to the sense of this difference?"
--John Adams