Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 506
Default Red Green Building your own airplane

http://www.youtube.com/watch?v=HioV-vQvqio

Karl
  #2   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 1,507
Default Red Green Building your own airplane

wrote:

http://www.youtube.com/watch?v=HioV-vQvqio

BOOOOO!!!!!

You might as well have posted a ****ing transcript.

I expected to see Red Green building an airplane, not sitting there reading
from a book he's trying to sell.

Please don't pull this lame crap again.

  #3   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 150
Default Red Green Building your own airplane

Rich Grise wrote:
wrote:

http://www.youtube.com/watch?v=HioV-vQvqio

BOOOOO!!!!!

You might as well have posted a ****ing transcript.

I expected to see Red Green building an airplane, not sitting there reading
from a book he's trying to sell.

Please don't pull this lame crap again.

I agree,
This group is the place to publish your blood pressure.
  #4   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 2,473
Default Red Green Building your own airplane

mike wrote:
I agree,
This group is the place to publish your blood pressure.


LOL, good one! Funnier than Lame Green. Bob
  #5   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 12,924
Default Red Green Building your own airplane


Rich Grise wrote:

wrote:

http://www.youtube.com/watch?v=HioV-vQvqio

BOOOOO!!!!!

You might as well have posted a ****ing transcript.

I expected to see Red Green building an airplane, not sitting there reading
from a book he's trying to sell.

Please don't pull this lame crap again.



It's better than you ever do around here.


--
For the last time: I am not a mad scientist! I m just a very ticked
off scientist!!!


  #6   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 2,024
Default Red Green Building your own airplane

Rich Grise wrote:
wrote:

http://www.youtube.com/watch?v=HioV-vQvqio

BOOOOO!!!!!

You might as well have posted a ****ing transcript.

I expected to see Red Green building an airplane, not sitting there reading



I confess, I wanted to see the aeroplane too. I thought we'd at least
see an interesting contraption with a hood ornament balancing on the
precipice of his garage, him seat-belted in, giving a last-minute check
and admiration to his duct tape joinery, pontificating as just he knows
how ... showing increasing curiosity with the fuel gauge so close to E
with the plane tilted up like that...probably just broken--you know how
they make things overseas!

Bill
  #7   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 1,224
Default Red Green Building your own airplane

On Wed, 17 Nov 2010 03:31:19 -0800, mike wrote:

Rich Grise wrote:
wrote:

http://www.youtube.com/watch?v=HioV-vQvqio

BOOOOO!!!!!

You might as well have posted a ****ing transcript.

I expected to see Red Green building an airplane, not sitting there reading
from a book he's trying to sell.

Please don't pull this lame crap again.

I agree,
This group is the place to publish your blood pressure.

128/70 at the moment, normally lower but I just sat down
Gerry :-)}
London, Canada
  #8   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 350
Default Red Green Building your own airplane

On Nov 17, 1:10*pm, Bill wrote:
Rich Grise wrote:
wrote:


http://www.youtube.com/watch?v=HioV-vQvqio


BOOOOO!!!!!


You might as well have posted a ****ing transcript.


I expected to see Red Green building an airplane, not sitting there reading


I confess, I wanted to see the aeroplane too. *I thought we'd at least
see an interesting contraption with a hood ornament balancing on the
precipice of his garage, him seat-belted in, giving a last-minute check
and admiration to his duct tape joinery, *pontificating as just he knows
how ... showing increasing curiosity with the fuel gauge so close to E
with the plane tilted up like that...probably just broken--you know how
they make things overseas!

Bill


http://www.veoh.com/collection/RedGr...994471bh59Kb6f
  #9   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 2,024
Default Red Green Building your own airplane

Denis G. wrote:
On Nov 17, 1:10 pm, wrote:
Rich Grise wrote:
wrote:


http://www.youtube.com/watch?v=HioV-vQvqio


BOOOOO!!!!!


You might as well have posted a ****ing transcript.


I expected to see Red Green building an airplane, not sitting there reading


I confess, I wanted to see the aeroplane too. I thought we'd at least
see an interesting contraption with a hood ornament balancing on the
precipice of his garage, him seat-belted in, giving a last-minute check
and admiration to his duct tape joinery, pontificating as just he knows
how ... showing increasing curiosity with the fuel gauge so close to E
with the plane tilted up like that...probably just broken--you know how
they make things overseas!

Bill


http://www.veoh.com/collection/RedGr...994471bh59Kb6f


I'm sorry, I did the best I could. Red's a professional! I had
forgotten how quick his jokes go by, and his Canadianism.

Bill


  #10   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 350
Default Red Green Building your own airplane

On Nov 18, 12:42*pm, Bill wrote:
Denis G. wrote:
On Nov 17, 1:10 pm, *wrote:
Rich Grise wrote:
wrote:


http://www.youtube.com/watch?v=HioV-vQvqio


BOOOOO!!!!!


You might as well have posted a ****ing transcript.


I expected to see Red Green building an airplane, not sitting there reading


I confess, I wanted to see the aeroplane too. *I thought we'd at least
see an interesting contraption with a hood ornament balancing on the
precipice of his garage, him seat-belted in, giving a last-minute check
and admiration to his duct tape joinery, *pontificating as just he knows
how ... showing increasing curiosity with the fuel gauge so close to E
with the plane tilted up like that...probably just broken--you know how
they make things overseas!


Bill


http://www.veoh.com/collection/RedGr...994471bh59Kb6f


I'm sorry, I did the best I could. *Red's a professional! * * I had
forgotten how quick his jokes go by, and his Canadianism.

Bill- Hide quoted text -

- Show quoted text -


I heard him on an NPR radio show and he was chatting with fans on the
air. I haven't seen his shows, but he struck me as clever and very
quick-witted in exchanges with calls to the show. The host of the
show (Larry Meiller) found him hilarious. It might be fun to read his
book.


  #11   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 506
Default Red Green Building your own airplane

On Nov 17, 12:58*am, Rich Grise wrote:
wrote:
http://www.youtube.com/watch?v=HioV-vQvqio


BOOOOO!!!!!

You might as well have posted a ****ing transcript.

I expected to see Red Green building an airplane, not sitting there reading
from a book he's trying to sell.

Please don't pull this lame crap again.


Well he's not building an airplane but at least it's on topic.
http://www.youtube.com/watch?v=7J2c6EPgbWI
Karl
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: RV-8 airplane Karl Townsend Metalworking 7 March 10th 10 12:50 PM
Fix your own airplane? Andy Champ[_2_] UK diy 1 February 14th 10 05:31 PM
Home Building Renovation Remodeling Green Home Contractor. World Marketing Home Repair 1 June 16th 08 09:04 PM
"Building for a green future" Mike Home Repair 17 March 22nd 07 09:55 PM
Green Building: Benefits of Vinyl [email protected] Home Repair 3 November 17th 06 04:05 PM


All times are GMT +1. The time now is 11:00 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"