DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Metalworking (https://www.diybanter.com/metalworking/)
-   -   Titanium foam builds Wolverine bones (https://www.diybanter.com/metalworking/310566-re-titanium-foam-builds-wolverine-bones.html)

Jon Anderson September 24th 10 05:51 AM

Titanium foam builds Wolverine bones
 
On 9/23/2010 5:06 PM, Steve W. wrote:

I can see the airline scanners now......


What would be any different that the present situation for anyone with
say, artificial hips? My wife has one. Every trip back to Australia,
she's gotten a royal inspection at SFO, despite carrying a card
identifying her as having a hip replacement on her right side, the side
that lights up the detector.

Just going to make them work a bit harder...


Jon



Joseph Gwinn September 25th 10 05:02 PM

Titanium foam builds Wolverine bones
 
In article ,
Jon Anderson wrote:

On 9/23/2010 5:06 PM, Steve W. wrote:

I can see the airline scanners now......


What would be any different that the present situation for anyone with
say, artificial hips? My wife has one. Every trip back to Australia,
she's gotten a royal inspection at SFO, despite carrying a card
identifying her as having a hip replacement on her right side, the side
that lights up the detector.

Just going to make them work a bit harder...


Actually, I bet the foam will be almost invisible to those scanners
because the eddy currents upon which the scanners depend vary as the
square of the diameter of the conductor. So, a fixed amount of metal in
a foam is less detectable than the same amount of metal formed into a
nice lump.


Joe Gwinn


All times are GMT +1. The time now is 04:06 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter