Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Turcite?
What do y'all think about Turcite ways on mills?
I have an opportunity, but all I've ever had were all-metal machines. Now Turcite-B raises it's ugly, bronze-impregnated, teflon head. LLoyd |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Turcite?
On Mon, 26 Jul 2010 20:24:02 -0500, "Lloyd E. Sponenburgh"
lloydspinsidemindspring.com wrote: What do y'all think about Turcite ways on mills? I have an opportunity, but all I've ever had were all-metal machines. Now Turcite-B raises it's ugly, bronze-impregnated, teflon head. LLoyd Good stuff when properly applied Properly applied Gunner One could not be a successful Leftwinger without realizing that, in contrast to the popular conception supported by newspapers and mothers of Leftwingers, a goodly number of Leftwingers are not only narrow-minded and dull, but also just stupid. Gunner Asch |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Turcite?
Dunno, Lloyd. A friend that rebuilds stuff swears by Turcite. He says be careful to re-size
everything to original height. Bob Swinney "Lloyd E. Sponenburgh" lloydspinsidemindspring.com wrote in message . 3.70... What do y'all think about Turcite ways on mills? I have an opportunity, but all I've ever had were all-metal machines. Now Turcite-B raises it's ugly, bronze-impregnated, teflon head. LLoyd |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
Turcite?
"Lloyd E. Sponenburgh" lloydspinsidemindspring.com wrote:
What do y'all think about Turcite ways on mills? I have an opportunity, but all I've ever had were all-metal machines. Now Turcite-B raises it's ugly, bronze-impregnated, teflon head. LLoyd Well, you don't want a manual oiler with this stuff. With oil it works fine. I have one VMC at work that was reworked with it that is going strong. Machines box ways damaged due to a bad oiler in a distribution block. We hired a guy with Popeye arms to fix it. WEs |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|