DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Metalworking (https://www.diybanter.com/metalworking/)
-   -   Amana portable A/C: shop limitations, inneresting thermodynamics.... (https://www.diybanter.com/metalworking/306270-re-amana-portable-c-shop-limitations-inneresting-thermodynamics.html)

Wes[_5_] July 11th 10 12:36 AM

Amana portable A/C: shop limitations, inneresting thermodynamics....
 
"Existential Angst" wrote:

It is VERY difficult to clean either of these coils properly, and even doing
the 60-75% job I did was no joke.
To properly clean the condenser coil would require *complete* disassembly of
the unit..... COMPLETE.
Which proly would not be so bad the second time around, but the FIRST time
around appears to be one helluva learning curve.

I seemed to be able to do a so-so job by blowing the fins *tangentially*, so
as not to jam the dirt/dust further into the fin structure.
And blew out the clog in the top drip pan.



Go to McMaster and buy this:

17315K25
Coil Cleaner 18-Ounce Aerosol

ProMagic Foaming Cooling Coil Cleaner

www.npsterling.com Sadly, their webserver is off line at moment if I can trust
opendns.org.

Wes
--
"Additionally as a security officer, I carry a gun to protect
government officials but my life isn't worth protecting at home
in their eyes." Dick Anthony Heller


All times are GMT +1. The time now is 04:34 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter