FS-Second Ops lathe
 

http://picasaweb.google.com/gunneras...51211960965714

I went through it, corrected a few issues, its now a decent enough
machine for production use. Ill even toss in some tooling
6 postition turret, double acting cross slide. A clone of the Hardinge
DV59 second ops lathe.

$1500

220/3ph,

1200 lbs

Located near Bakersfield, California

If no sale, it goes into my own shop.

I can load.



Gunner

--


"First Law of Leftist Debate
The more you present a leftist with factual evidence
that is counter to his preconceived world view and the
more difficult it becomes for him to refute it without
losing face the chance of him calling you a racist, bigot,
homophobe approaches infinity.

This is despite the thread you are in having not mentioned
race or sexual preference in any way that is relevant to
the subject." Grey Ghost

FS-Second Ops lathe
 

"Gunner Asch" wrote in message
...
http://picasaweb.google.com/gunneras...51211960965714

I went through it, corrected a few issues, its now a decent enough
machine for production use. Ill even toss in some tooling
6 postition turret, double acting cross slide. A clone of the Hardinge
DV59 second ops lathe.

$1500

220/3ph,

1200 lbs

Located near Bakersfield, California

If no sale, it goes into my own shop.

I can load.



Gunner

--

Keep your eye open for a tiny precision lathe.

FS-Second Ops lathe
 

On Sat, 29 May 2010 20:31:07 -0400, "Buerste"
wrote:


"Gunner Asch" wrote in message
.. .
http://picasaweb.google.com/gunneras...51211960965714

I went through it, corrected a few issues, its now a decent enough
machine for production use. Ill even toss in some tooling
6 postition turret, double acting cross slide. A clone of the Hardinge
DV59 second ops lathe.

$1500

220/3ph,

1200 lbs

Located near Bakersfield, California

If no sale, it goes into my own shop.

I can load.



Gunner

--

Keep your eye open for a tiny precision lathe.

What kind?

I do have a Hardinge TFB...

Gunner

--


"First Law of Leftist Debate
The more you present a leftist with factual evidence
that is counter to his preconceived world view and the
more difficult it becomes for him to refute it without
losing face the chance of him calling you a racist, bigot,
homophobe approaches infinity.

This is despite the thread you are in having not mentioned
race or sexual preference in any way that is relevant to
the subject." Grey Ghost

FS-Second Ops lathe
 

"Gunner Asch" wrote in message
...

snip
Keep your eye open for a tiny precision lathe.

What kind?

I do have a Hardinge TFB...

Gunner

--


That would do, $?

FS-Second Ops lathe
 

On Sun, 30 May 2010 00:01:08 -0400, "Buerste"
wrote:


"Gunner Asch" wrote in message
.. .

snip
Keep your eye open for a tiny precision lathe.

What kind?

I do have a Hardinge TFB...

Gunner

--


That would do, $?

$2500? You pay shipping?

Its the old narrow bed, but is one of the most accurate lathes I own.

English made, with the crank on the door. Everything works hunky dory.

Machine is 440, but has a step UP transformer mounted on the back. Been
using it for hummm...5 yrs with no issues.

Remember..the TFB..no threading. Turn/Face/Bore only

Includes 5C collet closer. I might be able to toss in a KDK type tool
holder..but no tool holders. My other lathes have KDK and I need the few
tool holders I have.

Better offer?

Want pictures?

It desperately needs paint. I do have a few cans of Rustoleum Gray..if
it makes any difference....I can sand and shoot.

Gunner

--


"First Law of Leftist Debate
The more you present a leftist with factual evidence
that is counter to his preconceived world view and the
more difficult it becomes for him to refute it without
losing face the chance of him calling you a racist, bigot,
homophobe approaches infinity.

This is despite the thread you are in having not mentioned
race or sexual preference in any way that is relevant to
the subject." Grey Ghost