Bandsaw Revisited
I'm about to throw out an "old" but unused bandsaw that I picked up
two years ago. http://s290.photobucket.com/albums/l...slander/Tools/ Unfortunately it turned out to be little more than garbage(with cast aluminum parts) that I couldn't find replacement parts for. But I thought I'd first ask if it was plausible to start from scratch and get upper and lower guide assemblies, blocks, holders ect. I'm just not sure if a full set of parts would be compatible with this saw beyond having to drill and tap new holes. Are the diameters and distances between the pulleys different from one 14" bandsaw to another? And since the pulleys are I believe cast aluminum, is it even worth it anyway? Lastly, I missed out on a Walker Turner bandsaw on Craigslist because I didn't get back to the seller in time after doing my research, so I thought I'd ask for recommendations for a good used 14" one to keep my eyes open for. Any recommendations would be appreciated. Thanks. Darren Harris Staten Island, New York. |
Bandsaw Revisited
On Tue, 20 Apr 2010 17:26:13 -0700 (PDT), Searcher7
wrote: I'm about to throw out an "old" but unused bandsaw that I picked up two years ago. http://s290.photobucket.com/albums/l...slander/Tools/ Unfortunately it turned out to be little more than garbage(with cast aluminum parts) that I couldn't find replacement parts for. But I thought I'd first ask if it was plausible to start from scratch and get upper and lower guide assemblies, blocks, holders ect. I'm just not sure if a full set of parts would be compatible with this saw beyond having to drill and tap new holes. Are the diameters and distances between the pulleys different from one 14" bandsaw to another? And since the pulleys are I believe cast aluminum, is it even worth it anyway? Lastly, I missed out on a Walker Turner bandsaw on Craigslist because I didn't get back to the seller in time after doing my research, so I thought I'd ask for recommendations for a good used 14" one to keep my eyes open for. Any recommendations would be appreciated. Thanks. Darren Harris Staten Island, New York. Too bad you arent closer..Ive got both a spare DoAll 18" and a Walker Turner 18" for sale. The DoAll is pretty cheap G Gunner "First Law of Leftist Debate The more you present a leftist with factual evidence that is counter to his preconceived world view and the more difficult it becomes for him to refute it without losing face the chance of him calling you a racist, bigot, homophobe approaches infinity. This is despite the thread you are in having not mentioned race or sexual preference in any way that is relevant to the subject." Grey Ghost |
Bandsaw Revisited
if that saw is what I think it is, I have that same saw, and have had it
since sometime in the early 80s - I put new roller bearing guides on it no problem, changed tires no problem, added a 1/4 inch riser block so it would take standard sized blades, and made a new upper wheel support out of aluminum when the pot metal one fatigued, and I made new trunions for the table out of steel pipe with some welding and mill work when the pot metal ones failed - I don't see what your problem is. "Searcher7" wrote in message ... I'm about to throw out an "old" but unused bandsaw that I picked up two years ago. http://s290.photobucket.com/albums/l...slander/Tools/ Unfortunately it turned out to be little more than garbage(with cast aluminum parts) that I couldn't find replacement parts for. But I thought I'd first ask if it was plausible to start from scratch and get upper and lower guide assemblies, blocks, holders ect. I'm just not sure if a full set of parts would be compatible with this saw beyond having to drill and tap new holes. Are the diameters and distances between the pulleys different from one 14" bandsaw to another? And since the pulleys are I believe cast aluminum, is it even worth it anyway? Lastly, I missed out on a Walker Turner bandsaw on Craigslist because I didn't get back to the seller in time after doing my research, so I thought I'd ask for recommendations for a good used 14" one to keep my eyes open for. Any recommendations would be appreciated. Thanks. Darren Harris Staten Island, New York. |
Bandsaw Revisited
On Apr 20, 6:26*pm, Searcher7 wrote:
I'm about to throw out an "old" but unused bandsaw that I picked up two years ago. http://s290.photobucket.com/albums/l...slander/Tools/ Unfortunately it turned out to be little more than garbage(with cast aluminum parts) that I couldn't find replacement parts for. But I thought I'd first ask if it was plausible to start from scratch and get upper and lower guide assemblies, blocks, holders ect. I'm just not sure if a full set of parts would be compatible with this saw beyond having to drill and tap new holes. Are the diameters and distances between the pulleys different from one 14" bandsaw to another? And since the pulleys are I believe cast aluminum, is it even worth it anyway? Lastly, I missed out on a Walker Turner bandsaw on Craigslist because I didn't get back to the seller in time after doing my research, so I thought I'd ask for recommendations for a good used 14" one to keep my eyes open for. Any recommendations would be appreciated. Thanks. Darren Harris Staten Island, New York. There are guys that have built their own bandsaws, for woodworking, using all home-made parts. One of my early mechanics magazines has plans, was from the '30s or '40s. Looked like a lot of work, depended on having a local jobbing foundry handy, would be cheaper to get a chink clone and work that over than to start from scratch. At least you're starting with a semblance of a bandsaw. If you want it for metal cutting, get a used Do All. Stan |
Bandsaw Revisited
On Apr 21, 2:38*pm, wrote:
On Apr 20, 6:26*pm, Searcher7 wrote: I'm about to throw out an "old" but unused bandsaw that I picked up two years ago. http://s290.photobucket.com/albums/l...slander/Tools/ Unfortunately it turned out to be little more than garbage(with cast aluminum parts) that I couldn't find replacement parts for. But I thought I'd first ask if it was plausible to start from scratch and get upper and lower guide assemblies, blocks, holders ect. I'm just not sure if a full set of parts would be compatible with this saw beyond having to drill and tap new holes. Are the diameters and distances between the pulleys different from one 14" bandsaw to another? And since the pulleys are I believe cast aluminum, is it even worth it anyway? Lastly, I missed out on a Walker Turner bandsaw on Craigslist because I didn't get back to the seller in time after doing my research, so I thought I'd ask for recommendations for a good used 14" one to keep my eyes open for. Any recommendations would be appreciated. Thanks. Darren Harris Staten Island, New York. There are guys that have built their own bandsaws, for woodworking, using all home-made parts. *One of my early mechanics magazines has plans, was from the '30s or '40s. *Looked like a lot of work, depended on having a local jobbing foundry handy, would be cheaper to get a chink clone and work that over than to start from scratch. *At least you're starting with a semblance of a bandsaw. *If you want it for metal cutting, get a used Do All. Stan I actually need one for both metal and wood. Nevertheless I was hoping to find someone who had a bandsaw with the same mounting dimensions so I can figure out what I need before ordering a bunch of parts that might not be compatible. Or should I only worry about the mounting holes? (I do have a Black & Decker 7-1/2" Bandsaw(9422) that I need a table insert for). Thanks. Darren Harris Staten Island, New York. |
Bandsaw Revisited
I actually need one for both metal and wood. Nevertheless I was hoping to find someone who had a bandsaw with the same mounting dimensions so I can figure out what I need before ordering a bunch of parts that might not be compatible. Or should I only worry about the mounting holes? (I do have a Black & Decker 7-1/2" Bandsaw(9422) that I need a table insert for). Thanks. Darren Harris Staten Island, New York. why is it you can't make the parts you need? I posted a few days ago about making trunions and the upper wheel support for what looks a lot like that saw - if I can do it why can't you? |
Bandsaw Revisited
On Apr 23, 12:30*am, "Bill Noble" wrote:
I actually need one for both metal and wood. Nevertheless I was hoping to find someone who had a bandsaw with the same mounting dimensions so I can figure out what I need before ordering a bunch of parts that might not be compatible. Or should I only worry about the mounting holes? (I do have a Black & Decker 7-1/2" Bandsaw(9422) that I need a table insert for). Thanks. Darren Harris Staten Island, New York. why is it you can't make the parts you need? I posted a few days ago about making trunions and the *upper wheel support for what looks a lot like that saw - if I can do it why can't you? Because I don't yet have my mill/drill working, and I'd need the exact dimensions of all the parts need anyway. I've not found any sites that show how this is done. Darren Harris Staten Island, New York. |
Bandsaw Revisited
"Searcher7" wrote in message ... On Apr 23, 12:30 am, "Bill Noble" wrote: I actually need one for both metal and wood. Nevertheless I was hoping to find someone who had a bandsaw with the same mounting dimensions so I can figure out what I need before ordering a bunch of parts that might not be compatible. Or should I only worry about the mounting holes? (I do have a Black & Decker 7-1/2" Bandsaw(9422) that I need a table insert for). Thanks. Darren Harris Staten Island, New York. why is it you can't make the parts you need? I posted a few days ago about making trunions and the upper wheel support for what looks a lot like that saw - if I can do it why can't you? Because I don't yet have my mill/drill working, and I'd need the exact dimensions of all the parts need anyway. I've not found any sites that show how this is done. Darren Harris Staten Island, New York. you do need scissors and cardboard, and a pencil - you make the patterns, then trace them onto metal, then cut with a hack saw - you don't need any power tools at all. I did use an arc welder, and since I had power tools, I used some, but everything you want can be made with a hacksaw, a few files and your drill press. |
Bandsaw Revisited
On Apr 21, 2:38*pm, wrote:
... There are guys that have built their own bandsaws, for woodworking, using all home-made parts. *.... Stan Me, twice. The first one borrowed the frame and wheels from a 10" Delta and I made the guides and transmission. Guides aren't difficult, I put a skate bearing behind the blade and two round cool blocks on the sides. This is the second, with wheels from a wrecked motorcycle: http://picasaweb.google.com/KB1DAL/H...53006429714322 The straight-line ladder frame was much easier to make and align than a C shaped one. It still has a throat 13" deep and almost 24" wide. jsw |
Bandsaw Revisited
On May 16, 1:17*am, "Bill Noble" wrote:
"Searcher7" wrote in message ... why is it you can't make the parts you need? I posted a few days ago about making trunions and the *upper wheel support for what looks a lot like that saw - if I can do it why can't you? Because I don't yet have my mill/drill working, and I'd need the exact dimensions of all the parts need anyway. I've not found any sites that show how this is done. Darren Harris Staten Island, New York. you do need scissors and cardboard, and a pencil - you make the patterns, then trace them onto metal, then cut with a hack saw - you don't need any power tools at all. *I did use an arc welder, and since I had power tools, I used some, but everything you want can be made with a hacksaw, a few files and your drill press. Second that. The only critical tool is enough imagination to visualize how the parts should fit together. I rarely need the lathe or mill to build a machine's framework, a 4x6 bandsaw and a stick welder are enough. The necessary drawings and dimensions fit on a 3x5 Post-it. jsw |
Bandsaw Revisited
On May 16, 8:56*am, Jim Wilkins wrote:
On May 16, 1:17*am, "Bill Noble" wrote: "Searcher7" wrote in message ... why is it you can't make the parts you need? I posted a few days ago about making trunions and the *upper wheel support for what looks a lot like that saw - if I can do it why can't you? Because I don't yet have my mill/drill working, and I'd need the exact dimensions of all the parts need anyway. I've not found any sites that show how this is done. Darren Harris Staten Island, New York. you do need scissors and cardboard, and a pencil - you make the patterns, then trace them onto metal, then cut with a hack saw - you don't need any power tools at all. *I did use an arc welder, and since I had power tools, I used some, but everything you want can be made with a hacksaw, a few files and your drill press. Second that. The only critical tool is enough imagination to visualize how the parts should fit together. I rarely need the lathe or mill to build a machine's framework, a 4x6bandsawand a stick welder are enough. The necessary drawings and dimensions fit on a 3x5 Post-it. jsw Well, as I said, I'd need to see how all this is done, and I've found no sites with visual aids. I'm about to dive in and pick up some trunnions from a seller on eBay. And he is also offering guides that have *three* bearings for $70.00. He said they should fit the my bandsaw but I thought three bearing guides were only for metal cutting bandsaws. Is this correct? http://s290.photobucket.com/albums/l...ools/?start=20 Thanks. Darren Harris Staten Island, New York. |
Bandsaw Revisited
On May 16, 8:56*am, Jim Wilkins wrote:
On May 16, 1:17*am, "Bill Noble" wrote: "Searcher7" wrote in message ... why is it you can't make the parts you need? I posted a few days ago about making trunions and the *upper wheel support for what looks a lot like that saw - if I can do it why can't you? Because I don't yet have my mill/drill working, and I'd need the exact dimensions of all the parts need anyway. I've not found any sites that show how this is done. Darren Harris Staten Island, New York. you do need scissors and cardboard, and a pencil - you make the patterns, then trace them onto metal, then cut with a hack saw - you don't need any power tools at all. *I did use an arc welder, and since I had power tools, I used some, but everything you want can be made with a hacksaw, a few files and your drill press. Second that. The only critical tool is enough imagination to visualize how the parts should fit together. I rarely need the lathe or mill to build a machine's framework, a 4x6 bandsaw and a stick welder are enough. The necessary drawings and dimensions fit on a 3x5 Post-it. jsw Well, as I said, I'd need to see how all this is done, and I've found no sites with visual aids. I'm about to dive in and pick up some trunnions from a seller on eBay. And he is also offering guides that have *three* bearings for $70.00. He said they should fit the my bandsaw but I thought three bearing guides were only for metal cutting bandsaws. Is this correct? http://s290.photobucket.com/albums/l...ools/?start=20 Also, I was hoping for suggestions on where to get 3/4hp motors from. Any idea what other appliances use similar motors? Thanks. Darren Harris Staten Island, New York. |
Bandsaw Revisited
On May 24, 1:26*pm, Searcher7 wrote:
On May 16, 8:56*am, Jim Wilkins wrote: On May 16, 1:17*am, "Bill Noble" wrote: "Searcher7" wrote in message ... why is it you can't make the parts you need? I posted a few days ago about making trunions and the *upper wheel support for what looks a lot like that saw - if I can do it why can't you? Because I don't yet have my mill/drill working, and I'd need the exact dimensions of all the parts need anyway. I've not found any sites that show how this is done. Darren Harris Staten Island, New York. you do need scissors and cardboard, and a pencil - you make the patterns, then trace them onto metal, then cut with a hack saw - you don't need any power tools at all. *I did use an arc welder, and since I had power tools, I used some, but everything you want can be made with a hacksaw, a few files and your drill press. Second that. The only critical tool is enough imagination to visualize how the parts should fit together. I rarely need the lathe or mill to build a machine's framework, a 4x6 bandsaw and a stick welder are enough. The necessary drawings and dimensions fit on a 3x5 Post-it. jsw Well, as I said, I'd need to see how all this is done, and I've found no sites with visual aids. I'm about to dive in and pick up some trunnions from a seller on eBay. And he is also offering guides that have *three* bearings for $70.00. He said they should fit the my bandsaw but I thought three bearing guides were only for metal cutting bandsaws. Is this correct? http://s290.photobucket.com/albums/l...ools/?start=20 Also, I was hoping for suggestions on where to get 3/4hp motors from. Any idea what other appliances use similar motors? Thanks. Darren Harris Staten Island, New York.- Hide quoted text - - Show quoted text - Most current appliances use built-for-the-purpose motors. Used to be you could get some decent motors from washing machines with standard mounts, but now they've all gone to oddball welded frames, the only thing they fit is the original appliance. Might be you could visit an old-time appliance place and see what they've got in the scrap pile. You might consider new, with woodworking, a TEFC motor should be the way to go. Stan |
Bandsaw Revisited
On May 24, 3:26*pm, Searcher7 wrote:
... Well, as I said, I'd need to see how all this is done, and I've found no sites with visual aids. .... Darren Harris Here is a photo of a home-made bandsaw blade guide: http://www.forestryforum.com/images/...ew%20guide.JPG The thread: http://www.forestryforum.com/board/i...c=5979.0%3Ball The ones I made are functionally similar but machined rather than welded. I put a solid guide on the other side, clamped with a screw, which can slide back if a large chip jams under the roller. Like Chet and Ronwood I push the blade 1/8" outward with the roller side of the guide, and it barely clears the back when it isn't cutting. That setting advice came from either a saw or a blade manufacturer's technician, I forget which one's. jsw |
Bandsaw Revisited
On May 24, 3:43*pm, wrote:
On May 24, 1:26*pm, Searcher7 wrote: On May 16, 8:56*am, Jim Wilkins wrote: On May 16, 1:17*am, "Bill Noble" wrote: "Searcher7" wrote in message ... why is it you can't make the parts you need? I posted a few days ago about making trunions and the *upper wheel support for what looks a lot like that saw - if I can do it why can't you? Because I don't yet have my mill/drill working, and I'd need the exact dimensions of all the parts need anyway. I've not found any sites that show how this is done. Darren Harris Staten Island, New York. you do need scissors and cardboard, and a pencil - you make the patterns, then trace them onto metal, then cut with a hack saw - you don't need any power tools at all. *I did use an arc welder, and since I had power tools, I used some, but everything you want can be made with a hacksaw, a few files and your drill press. Second that. The only critical tool is enough imagination to visualize how the parts should fit together. I rarely need the lathe or mill to build a machine's framework, a 4x6 bandsaw and a stick welder are enough. The necessary drawings and dimensions fit on a 3x5 Post-it. jsw Well, as I said, I'd need to see how all this is done, and I've found no sites with visual aids. I'm about to dive in and pick up some trunnions from a seller on eBay. And he is also offering guides that have *three* bearings for $70.00. He said they should fit the my bandsaw but I thought three bearing guides were only for metal cutting bandsaws. Is this correct? http://s290.photobucket.com/albums/l...ools/?start=20 Also, I was hoping for suggestions on where to get 3/4hp motors from. Any idea what other appliances use similar motors? Thanks. Darren Harris Staten Island, New York.- Hide quoted text - - Show quoted text - Most current appliances use built-for-the-purpose motors. *Used to be you could get some decent motors from washing machines with standard mounts, but now they've all gone to oddball welded frames, the only thing they fit is the original appliance. *Might be you could visit an old-time appliance place and see what they've got in the scrap pile. You might consider new, with woodworking, a TEFC motor should be the way to go. Stan I guess motor mounts can be custom made. I'll have to look around. Thanks. Darren Harris Staten Island, New York. |
Bandsaw Revisited
On May 24, 5:34*pm, Jim Wilkins wrote:
On May 24, 3:26*pm, Searcher7 wrote: ... Well, as I said, I'd need to see how all this is done, and I've found no sites with visual aids. ... Darren Harris Here is a photo of a home-made bandsaw blade guide:http://www.forestryforum.com/images/...ew%20guide.JPG The thread:http://www.forestryforum.com/board/i...c=5979.0%3Ball The ones I made are functionally similar but machined rather than welded. I put a solid guide on the other side, clamped with a screw, which can slide back if a large chip jams under the roller. Like Chet and Ronwood I push the blade 1/8" outward with the roller side of the guide, and it barely clears the back when it isn't cutting. That setting advice came from either a saw or a blade manufacturer's technician, I forget which one's. jsw I'm assuming the only parts I really *need* to buy are the bearings for the guides and a motor.(I assume it makes no real difference if I use one of three bearings for the upper and the lower). Thanks. Darren Harris Staten Isalnd, New York. |
Bandsaw Revisited
On May 25, 8:46*am, Searcher7 wrote:
On May 24, 5:34*pm, Jim Wilkins wrote: ... I'm assuming the only parts I really *need* to buy are the bearings for the guides and a motor.(I assume it makes no real difference if I use one of three bearings for the upper and the lower). Thanks. Darren Harris I based my blade guides on this: http://www.suffolkmachinery.com/guide_systems_NW.asp with a thicker plate underneath to hold the Cool Blocks: http://www.allbandsawblades.com/cool_blocks.htm I bought the "poor performing imitations" for about 1/3 the price and they have been fine. jsw |
Bandsaw Revisited
On 2010-05-25, Searcher7 wrote:
On May 24, 5:34*pm, Jim Wilkins wrote: On May 24, 3:26*pm, Searcher7 wrote: ... Well, as I said, I'd need to see how all this is done, and I've found no sites with visual aids. ... Darren Harris Here is a photo of a home-made bandsaw blade guide:http://www.forestryforum.com/images/...ew%20guide.JPG The thread:http://www.forestryforum.com/board/i...c=5979.0%3Ball [ ... ] I'm assuming the only parts I really *need* to buy are the bearings for the guides and a motor.(I assume it makes no real difference if I use one of three bearings for the upper and the lower). Actually -- just grab a couple of inline skates from a kid and you have the bearings you need -- with a couple of spares. :-) No "buy" needed. Enjoy, DoN. -- Email: | Voice (all times): (703) 938-4564 (too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html --- Black Holes are where God is dividing by zero --- |
Bandsaw Revisited
On 5/25/2010 9:56 PM, DoN. Nichols wrote:
On 2010-05-25, wrote: On May 24, 5:34 pm, Jim wrote: On May 24, 3:26 pm, wrote: ... Well, as I said, I'd need to see how all this is done, and I've found no sites with visual aids. ... Darren Harris Here is a photo of a home-made bandsaw blade guide:http://www.forestryforum.com/images/...ew%20guide.JPG The thread:http://www.forestryforum.com/board/i...c=5979.0%3Ball [ ... ] I'm assuming the only parts I really *need* to buy are the bearings for the guides and a motor.(I assume it makes no real difference if I use one of three bearings for the upper and the lower). Actually -- just grab a couple of inline skates from a kid and you have the bearings you need -- with a couple of spares. :-) No "buy" needed. Enjoy, DoN. I just bought a Shopsmith Banbsaw for $140. Brand new. Also bought the Shopsmith for $295. So look on craigslist. I use www.searchtempest.com as it will search all CL within the amount of miles you specifiy. |
Bandsaw Revisited
On May 26, 5:49*pm, Califbill wrote:
... I just bought a Shopsmith Banbsaw for $140. *Brand new. *Also bought the Shopsmith for $295. *So look on craigslist. *I usewww.searchtempest.com as it will search all CL within the amount of miles you specifiy. I learned woodworking on one and really liked it. It's the older cast iron model, a little less convenient but functionally very similar to my grandfather's aluminum Mark 5. The only real weakness was side play in the table when ripping, solved by a brace clamped to the extension table. I set the quill stop to allow a little sideways adjustment when sawing, not enough to hit the table insert. It was a nice fine adjustment to get a light press fit on tenons and finger joints for cabinet doors. The need to do all the sawing and then switch to drilling taught me to plan work better. In drill press position the rip fence, miter guide and table adjustment screw helped a lot to locate mortice and dowel holes. It's horizontal drilling setup was great for the dowels in the ends of door rails. If you drill clean through the practice stile you can use it to position the table and miter gauge for the holes in the rail. jsw |
Bandsaw Revisited
On May 26, 12:56*am, "DoN. Nichols" wrote:
On 2010-05-25, Searcher7 wrote: On May 24, 5:34*pm, Jim Wilkins wrote: On May 24, 3:26*pm, Searcher7 wrote: ... Well, as I said, I'd need to see how all this is done, and I've found no sites with visual aids. ... Darren Harris Here is a photo of a home-made bandsaw blade guide:http://www.forestryforum.com/images/...ew%20guide.JPG The thread:http://www.forestryforum.com/board/i...c=5979.0%3Ball * * * * [ ... ] I'm assuming the only parts I really *need* to buy are the bearings for the guides and a motor.(I assume it makes no real difference if I use one of three bearings for the upper and the lower). * * * * Actually -- just grab a couple of inline skates from a kid and you have the bearings you need -- with a couple of spares. :-) No "buy" needed. * * * * Enjoy, * * * * * * * * DoN. -- *Email: * * | Voice (all times): (703) 938-4564 * * * * (too) near Washington D.C. |http://www.d-and-d.com/dnichols/DoN.html * * * * * *--- Black Holes are where God is dividing by zero --- Thanks. I've been looking for good pics to study before I design the guide holders. BTW. It is difficult finding single phase motors on eBay. The only "cheap" (3/4hp) motors I've come across are called Leeson's. Does anyone have thoughts on picking up one of these motors for a bandsaw? And are Bi-metal saw blades still recommended if I'm only cutting 2x4s and 3/4" plywood? Thanks. Darren Harris Staten Island, New York. |
Bandsaw Revisited
On May 29, 4:24*am, Searcher7 wrote:
BTW. It is difficult finding single phase motors on eBay. The only "cheap" (3/4hp) motors I've come across are called Leeson's. Does anyone have thoughts on picking up one of these motors for a bandsaw? Thanks. Darren Harris Staten Island, New York. Industrial stuff on Ebay is usually a bargain. I think the reason is that companies usually buy new equipment, so used industrial equipment is not in demand. So my advice would be to start haunting Ebay for variable speed devices and buy a three phase motor locally ( maybe off Ebay, but close enough to you to be able to pick it up. ). I think you can get a 3/4 hp three phase motor and a VFD big enough to run the motor for about the same price as a 3/4 hp single phase motor. Dan |
Bandsaw Revisited
On Sat, 29 May 2010 04:27:03 -0700 (PDT), "
wrote: On May 29, 4:24*am, Searcher7 wrote: BTW. It is difficult finding single phase motors on eBay. The only "cheap" (3/4hp) motors I've come across are called Leeson's. Does anyone have thoughts on picking up one of these motors for a bandsaw? Thanks. Darren Harris Staten Island, New York. Industrial stuff on Ebay is usually a bargain. I think the reason is that companies usually buy new equipment, so used industrial equipment is not in demand. And in Michigan and California..its because the companies that owned it...died. Lots of CHEAP machinery around these days. So my advice would be to start haunting Ebay for variable speed devices and buy a three phase motor locally ( maybe off Ebay, but close enough to you to be able to pick it up. ). I think you can get a 3/4 hp three phase motor and a VFD big enough to run the motor for about the same price as a 3/4 hp single phase motor. Dan -- "First Law of Leftist Debate The more you present a leftist with factual evidence that is counter to his preconceived world view and the more difficult it becomes for him to refute it without losing face the chance of him calling you a racist, bigot, homophobe approaches infinity. This is despite the thread you are in having not mentioned race or sexual preference in any way that is relevant to the subject." Grey Ghost |
Bandsaw Revisited
On May 29, 7:27*am, " wrote:
On May 29, 4:24*am, Searcher7 wrote: BTW. It is difficult finding single phase motors on eBay. The only "cheap" (3/4hp) motors I've come across are called Leeson's. Does anyone have thoughts on picking up one of these motors for a bandsaw? Thanks. Darren Harris Staten Island, New York. Industrial stuff on Ebay is usually a bargain. I think the reason is that companies usually buy new equipment, so used industrial equipment is not in demand. So my advice would be to start haunting Ebay for variable speed devices and buy a three phase motor locally ( maybe off Ebay, but close enough to you to be able to pick it up. ). *I think you can get a 3/4 hp three phase motor and a VFD big enough to run the motor for about the same price as a 3/4 hp single phase motor. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *Dan I can't run a 3 phase motor. I figure I'd look for a similar motor to that of my drill press. http://s290.photobucket.com/albums/l...rillPress2.jpg But I may opt for something of lower power that that. Thanks. Darren Harris Staten Island, New York. |
All times are GMT +1. The time now is 10:34 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter