Metric brass flats?
Is there a on-line metals place that has metric dimensioned brass
rectangular stock? I would rather not machine the steadyrest fingers from imperial stock since it's going to result in a bunch of brass filings. |
Metric brass flats?
A lot of them do.
Bob Swinney "Louis Ohland" wrote in message ... Is there a on-line metals place that has metric dimensioned brass rectangular stock? I would rather not machine the steadyrest fingers from imperial stock since it's going to result in a bunch of brass filings. |
Metric brass flats?
On 3/20/2010 12:28, Robert Swinney wrote:
A lot of them do. Bob Swinney "Louis wrote in message ... Is there a on-line metals place that has metric dimensioned brass rectangular stock? I would rather not machine the steadyrest fingers from imperial stock since it's going to result in a bunch of brass filings. Name one. |
Metric brass flats?
On Sat, 20 Mar 2010 13:05:01 -0500, Louis Ohland
wrote: On 3/20/2010 12:28, Robert Swinney wrote: A lot of them do. Bob Swinney "Louis wrote in message ... Is there a on-line metals place that has metric dimensioned brass rectangular stock? I would rather not machine the steadyrest fingers from imperial stock since it's going to result in a bunch of brass filings. Name one. http://www.metricmetal.com/ |
Metric brass flats?
On 3/20/2010 14:16, Pete Keillor wrote:
On Sat, 20 Mar 2010 13:05:01 -0500, Louis wrote: On 3/20/2010 12:28, Robert Swinney wrote: A lot of them do. Bob Swinney "Louis wrote in message ... Is there a on-line metals place that has metric dimensioned brass rectangular stock? I would rather not machine the steadyrest fingers from imperial stock since it's going to result in a bunch of brass filings. Name one. http://www.metricmetal.com/ Yup. Another RFQ. I want perhaps a meter of 8mm square stock. |
Metric brass flats?
On Mar 20, 3:28*pm, Louis Ohland wrote:
... Yup. Another RFQ. I want perhaps a meter of 8mm square stock. Is 5/16" close enough? jsw |
Metric brass flats?
Jim Wilkins wrote:
On Mar 20, 3:28*pm, Louis Ohland wrote: ... Yup. Another RFQ. I want perhaps a meter of 8mm square stock. Is 5/16" close enough? jsw And for that, 8951K23 at mcmaster is 22.68 for 6 feet. Wes -- "Additionally as a security officer, I carry a gun to protect government officials but my life isn't worth protecting at home in their eyes." Dick Anthony Heller |
Metric brass flats?
On 3/20/2010 19:59, Wes wrote:
Jim wrote: Yup. Another RFQ. I want perhaps a meter of 8mm square stock. Is 5/16" close enough? And for that, 8951K23 at mcmaster is 22.68 for 6 feet. 8mm is .3150, 5/16 is .3125 Makes me feel like I'm conducting brain surgery on a paper cut. How will the chinese ever forgive me for .0025" of slop? |
Metric brass flats?
On Mar 21, 10:22*am, Louis Ohland wrote:
... 8mm is .3150, 5/16 is .3125 Makes me feel like I'm conducting brain surgery on a paper cut. How will the chinese ever forgive me for .0025" of slop? You expect the stock to be that accurate? jsw |
Metric brass flats?
Louis Ohland wrote:
On 3/20/2010 19:59, Wes wrote: Jim wrote: Yup. Another RFQ. I want perhaps a meter of 8mm square stock. Is 5/16" close enough? And for that, 8951K23 at mcmaster is 22.68 for 6 feet. 8mm is .3150, 5/16 is .3125 Makes me feel like I'm conducting brain surgery on a paper cut. How will the chinese ever forgive me for .0025" of slop? Probably no chance that it (stock) would be on the plus side of tolerance ;( Wes -- "Additionally as a security officer, I carry a gun to protect government officials but my life isn't worth protecting at home in their eyes." Dick Anthony Heller |
Metric brass flats?
Ditto
I need about 1 meter of 12 mm square brass stock, no luck at any of my usual suppliers. I'll probably try to settle for 7/16 " (11.11mm), but I'd be very grateful if anyone has a reasonably priced source for the metric size in the US. --- news://freenews.netfront.net/ - complaints: --- |
All times are GMT +1. The time now is 10:15 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter