Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
FS -- 1 to 3 HP phase-a-matic "static phase converter"
Used, works great, lets you run up to 3 HP motors at 2/3 power.
Comes from my lathe. Price is $50. i |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
FS -- 1 to 3 HP phase-a-matic "static phase converter"
"Ignoramus25542" wrote in message ... Used, works great, lets you run up to 3 HP motors at 2/3 power. Comes from my lathe. Price is $50. Or use this to start an idler. No brainier full power phase converter. That's what one of my units is. Its only worked for 25 years now. Karl |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
FS -- 1 to 3 HP phase-a-matic "static phase converter"
On 2010-02-05, Karl Townsend wrote:
"Ignoramus25542" wrote in message Used, works great, lets you run up to 3 HP motors at 2/3 power. Comes from my lathe. Price is $50. Or use this to start an idler. No brainier full power phase converter. That's what one of my units is. Its only worked for 25 years now. Yep, great idea. i |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Static phase converter | Metalworking | |||
VFD or Static phase converter on Clausing 1301 | Metalworking | |||
Static Phase Converter? | Metalworking | |||
static phase converter question | Metalworking | |||
static phase converter question | Metalworking |