Welding cast iron to mild steel
 

On Sat, 08 Aug 2009 09:35:04 -0500, the infamous Ignoramus13611
scrawled the following:

I ended up turning the cast iron hub on the lathe to get rid of the
remnants of original spokes (first picture), and then drilled/tapped
and bolted the steel hub of the handle to the cast iron hub of the
press. It actually looks quite better now, compared to what it was
when I brought it home (last picture).

http://igor.chudov.com/projects/misc...C-Arbor-Press/

"Connection Interrupted" error. Retries fail. 5:30am PDT.

--
Content thyself to be obscurely good. When vice prevails, and
impious men bear sway, the post of honor is a private station.
-- Joseph Addison, 'Cato'

Welding cast iron to mild steel
 

On 2009-08-09, Larry Jaques novalidaddress@di wrote:
On Sat, 08 Aug 2009 09:35:04 -0500, the infamous Ignoramus13611
scrawled the following:

I ended up turning the cast iron hub on the lathe to get rid of the
remnants of original spokes (first picture), and then drilled/tapped
and bolted the steel hub of the handle to the cast iron hub of the
press. It actually looks quite better now, compared to what it was
when I brought it home (last picture).

http://igor.chudov.com/projects/misc...C-Arbor-Press/

"Connection Interrupted" error. Retries fail. 5:30am PDT.


Strange, can you try now, it seems to work fine.

i