Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Holders for A. R. Warner TPMB-322 HSS inserts
I bought some TPMB-322 HSS inserts from Little Machine Shop for use on
some 1/2" shank toolholders. AR Warner uses .125 screws (4-40). Grizzly uses .185 screws (either 8-32 or metric 4x.70) Does anyone make a 4-40 screw toolholder? I can machine one from 1/2" stock, but would rather buy one. |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Holders for A. R. Warner TPMB-322 HSS inserts
On Jul 18, 7:57*pm, Louis Ohland wrote:
* I bought some TPMB-322 HSS inserts from Little Machine Shop for use on some 1/2" shank toolholders. AR Warner uses .125 screws (4-40). Actually, .125 screws would be 5-40 (yes, it IS standard, just not terribly common). 4-40 might fit, loosely, but wouldn't be the first choice. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Does anyone make HSS inserts for carbide tool holders? | Metalworking | |||
Bulb/lamp holders to convert candle holders to electric? | UK diy | |||
Ping: Pat Warner | Woodworking | |||
Are there blank inserts WITH HOLES for the modular inserts? | Home Repair | |||
carbide inserts and lathe holders for same | Metalworking |