DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Metalworking (https://www.diybanter.com/metalworking/)
-   -   Liability & responsibility of electrician? (https://www.diybanter.com/metalworking/282653-re-liability-responsibility-electrician.html)

SteveB[_10_] July 18th 09 11:06 PM

Liability & responsibility of electrician?
 

"Gunner Asch" wrote

Then the various Licensed Electricians who installed machines etc over
the years at the factory I finished tearing down yesterday were all
doing it illegally. 75,000 sq ft and no grounds in any of the
boxes/runs.

California btw..Anaheim.

G



When I was studying for ASP (Associate Safety Professional), one guy took me
under his wing. He said I needed four things to buffalo the crap out of any
business owner. First, a plug in circuit tester, second, an audiometer,
third, a clipboard, and fourth, a very authentic hard plastic or laminated
ID. Plastic mounted on chest, laminated on neck lanyard.

At least 25%, and much higher in many locations had the wires on any box you
tested run incorrectly. Testing a few of these put the employer on the
defensive. Sound levels were almost always over the 85 db OSHA standards,
but it was not necessary to explain that it would take many hours at that
level to harm hearing. Hardly anybody wants to challenge a person with a
clipboard, badge, or laminated ID in a neck lanyard.

You can just walk around any business with these items, and I will guarantee
you will having people run into themselves within ten minutes.

And then you say, "But I know how to fix these things and keep you in OSHA
compliance."

For a fee, of course.

Steve



Gunner Asch[_4_] July 19th 09 08:15 PM

Liability & responsibility of electrician?
 
On Sat, 18 Jul 2009 15:06:45 -0600, "SteveB"
wrote:


"Gunner Asch" wrote

Then the various Licensed Electricians who installed machines etc over
the years at the factory I finished tearing down yesterday were all
doing it illegally. 75,000 sq ft and no grounds in any of the
boxes/runs.

California btw..Anaheim.

G



When I was studying for ASP (Associate Safety Professional), one guy took me
under his wing. He said I needed four things to buffalo the crap out of any
business owner. First, a plug in circuit tester, second, an audiometer,
third, a clipboard, and fourth, a very authentic hard plastic or laminated
ID. Plastic mounted on chest, laminated on neck lanyard.

At least 25%, and much higher in many locations had the wires on any box you
tested run incorrectly. Testing a few of these put the employer on the
defensive. Sound levels were almost always over the 85 db OSHA standards,
but it was not necessary to explain that it would take many hours at that
level to harm hearing. Hardly anybody wants to challenge a person with a
clipboard, badge, or laminated ID in a neck lanyard.

You can just walk around any business with these items, and I will guarantee
you will having people run into themselves within ten minutes.

And then you say, "But I know how to fix these things and keep you in OSHA
compliance."

For a fee, of course.

Steve


Thats Cold ....really cold dude.

And 100% correct.

G

Fortunately I dont have to resort to that sort of thing..but with the
oncoming Depression...I have spotted a few Liberal organizations I might
consider visiting with the tools mentioned VEG

Gunner

"Lenin called them "useful idiots," those people living in
liberal democracies who by giving moral and material support
to a totalitarian ideology in effect were braiding the rope that
would hang them. Why people who enjoyed freedom and prosperity worked
passionately to destroy both is a fascinating question, one still with us
today. Now the useful idiots can be found in the chorus of appeasement,
reflexive anti-Americanism, and sentimental idealism trying to inhibit
the necessary responses to another freedom-hating ideology, radical Islam"

Bruce C. Thornton, a professor of Classics at American University of Cal State Fresno

pyotr filipivich July 20th 09 03:34 AM

Liability & responsibility of electrician?
 
Let the Record show that Gunner Asch on
or about Sun, 19 Jul 2009 11:15:57 -0700 did write/type or cause to
appear in rec.crafts.metalworking the following:
On Sat, 18 Jul 2009 15:06:45 -0600, "SteveB"
wrote:


"Gunner Asch" wrote

Then the various Licensed Electricians who installed machines etc over
the years at the factory I finished tearing down yesterday were all
doing it illegally. 75,000 sq ft and no grounds in any of the
boxes/runs.

California btw..Anaheim.

G



When I was studying for ASP (Associate Safety Professional), one guy took me
under his wing. He said I needed four things to buffalo the crap out of any
business owner. First, a plug in circuit tester, second, an audiometer,
third, a clipboard, and fourth, a very authentic hard plastic or laminated
ID. Plastic mounted on chest, laminated on neck lanyard.

At least 25%, and much higher in many locations had the wires on any box you
tested run incorrectly. Testing a few of these put the employer on the
defensive. Sound levels were almost always over the 85 db OSHA standards,
but it was not necessary to explain that it would take many hours at that
level to harm hearing. Hardly anybody wants to challenge a person with a
clipboard, badge, or laminated ID in a neck lanyard.

You can just walk around any business with these items, and I will guarantee
you will having people run into themselves within ten minutes.

And then you say, "But I know how to fix these things and keep you in OSHA
compliance."

For a fee, of course.

Steve


Thats Cold ....really cold dude.


Cold calls - the hardest form of salesmanship, but sometimes the
most rewarding.

And 100% correct.


It's no brag if you can do it. Now where did I put that hard
hat?

G

Fortunately I dont have to resort to that sort of thing..but with the
oncoming Depression...I have spotted a few Liberal organizations I might
consider visiting with the tools mentioned VEG

Gunner

"Lenin called them "useful idiots," those people living in
liberal democracies who by giving moral and material support
to a totalitarian ideology in effect were braiding the rope that
would hang them. Why people who enjoyed freedom and prosperity worked
passionately to destroy both is a fascinating question, one still with us
today. Now the useful idiots can be found in the chorus of appeasement,
reflexive anti-Americanism, and sentimental idealism trying to inhibit
the necessary responses to another freedom-hating ideology, radical Islam"

Bruce C. Thornton, a professor of Classics at American University of Cal State Fresno

-
pyotr filipivich
We will drink no whiskey before its nine.
It's eight fifty eight. Close enough!


All times are GMT +1. The time now is 01:05 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter