I need plans for a lathe bit grinding jig like this? Can a Home ShopMachinist help me out?
 

I want to build a lathe bit grinding jig like this one shown at ebay.
So I'm looking for some Home shop machinist plans that I can follow.
I've spent some time googling but could not find anything similar.

http://cgi.ebay.com/South-Bend-Lathe-tool-cutter-bit-grinding-block_W0QQitemZ360104956956QQcmdZViewItemQQptZLH_D efaultDomain_0?hash=item360104956956&_trksid=p3286 .c0.m14&_trkparms=72:1205|66:2|65:12|39:1|240:1318

Thank you in advance
Rod
San Francisco

I need plans for a lathe bit grinding jig like this? Can a HomeShop Machinist help me out?
 

rodjava wrote:
I want to build a lathe bit grinding jig like this one shown at ebay.
So I'm looking for some Home shop machinist plans that I can follow.
I've spent some time googling but could not find anything similar.

http://cgi.ebay.com/South-Bend-Lathe-tool-cutter-bit-grinding-block_W0QQitemZ360104956956QQcmdZViewItemQQptZLH_D efaultDomain_0?hash=item360104956956&_trksid=p3286 .c0.m14&_trkparms=72:1205|66:2|65:12|39:1|240:1318

Thank you in advance
Rod
San Francisco

There are plans for a similar jig in the Village Press book "The Shop
Wisdom of D. E. Johnson", pp 2-4. The book is a collection of the
articles Johnson wrote for Home Shop Machinist over the years, so the
article also appeared in HSM some time ago.

Johnson uses a Jergen's square hole sleeve (MSC sells them) to hold
the bit, so unlike the commercial unit, his jig is good only for one
size of bit. If you need two sizes of bit, you'll have to build two
jigs.

Village Press used to sell copies of old articles at a reasonable cost
per page. Don't know if they still do. And you'd probably need the
original HSM article reference, though they might be nice and copy
the three pages from the book. If you're near a library, there's also
Interlibrary Loan which can borrow books for you from other libraries,
though it may take time for the system to find a library with a copy
of Johnson's book.

Tove

I need plans for a lathe bit grinding jig like this? Can a HomeShop Machinist help me out?
 

rodjava wrote:
I want to build a lathe bit grinding jig like this one shown at ebay.
So I'm looking for some Home shop machinist plans that I can follow.
I've spent some time googling but could not find anything similar.

http://cgi.ebay.com/South-Bend-Lathe-tool-cutter-bit-grinding-block_W0QQitemZ360104956956QQcmdZViewItemQQptZLH_D efaultDomain_0?hash=item360104956956&_trksid=p3286 .c0.m14&_trkparms=72:1205|66:2|65:12|39:1|240:1318

Thank you in advance
Rod
San Francisco

It looks simple enough....a square based block (cube) with a square hole in it of proper
size and a 360 degree dial on the end. There's probably a setscrew to lock the bit into
the holder and the holder into the block at the proper angle.

I'm still thinking you may need the tilting table to get the proper rake.

I need plans for a lathe bit grinding jig like this? Can a HomeShop Machinist help me out?
 

On Nov 11, 5:30*pm, Tove Momerathsson wrote:
rodjava wrote:
I want to build a lathe bit grinding jig like this one shown at ebay.
So I'm looking for some Home shop machinist plans that I can follow.
I've spent some time googling but could not find anything similar.

http://cgi.ebay.com/South-Bend-Lathe-tool-cutter-bit-grinding-block_W...66:2|65:12|39:1|240:1318

Thank you in advance
Rod
San Francisco

There are plans for a similar jig in the Village Press book "The Shop
Wisdom of D. E. Johnson", pp 2-4. *The book is a collection of the
articles Johnson wrote for Home Shop Machinist over the years, so the
article also appeared in HSM some time ago.

Johnson uses a Jergen's square hole sleeve (MSC sells them) to hold
the bit, so unlike the commercial unit, his jig is good only for one
size of bit. *If you need two sizes of bit, you'll have to build two
jigs.

Village Press used to sell copies of old articles at a reasonable cost
per page. *Don't know if they still do. *And you'd probably need the
original HSM article reference, though they might be nice and copy
the three pages from the book. *If you're near a library, there's also
Interlibrary Loan which can borrow books for you from other libraries,
though it may take time for the system to find a library with a copy
of Johnson's book.

Tove

Tove,
Thank you for the reference. It's a alternative if no other plans are
available online and for free.
I'm still hoping another HSM will come through.

Rod

I need plans for a lathe bit grinding jig like this? Can a HomeShop Machinist help me out?
 

On Nov 11, 5:54*pm, rodjava wrote:
On Nov 11, 5:30*pm, Tove Momerathsson wrote:



rodjava wrote:
I want to build a lathe bit grinding jig like this one shown at ebay.
So I'm looking for some Home shop machinist plans that I can follow.
I've spent some time googling but could not find anything similar.

http://cgi.ebay.com/South-Bend-Lathe-tool-cutter-bit-grinding-block_W....65:12|39:1|240:1318

Thank you in advance
Rod
San Francisco

There are plans for a similar jig in the Village Press book "The Shop
Wisdom of D. E. Johnson", pp 2-4. *The book is a collection of the
articles Johnson wrote for Home Shop Machinist over the years, so the
article also appeared in HSM some time ago.

Johnson uses a Jergen's square hole sleeve (MSC sells them) to hold
the bit, so unlike the commercial unit, his jig is good only for one
size of bit. *If you need two sizes of bit, you'll have to build two
jigs.

Village Press used to sell copies of old articles at a reasonable cost
per page. *Don't know if they still do. *And you'd probably need the
original HSM article reference, though they might be nice and copy
the three pages from the book. *If you're near a library, there's also
Interlibrary Loan which can borrow books for you from other libraries,
though it may take time for the system to find a library with a copy
of Johnson's book.

Tove

Tove,
Thank you for the reference. It's a alternative if no other plans are
available online and for free.
I'm still hoping another HSM will come through.

Rod

Thanks everybody for your suggestions.
I thought it out and here is what I plan to do.

Since I already have all sizes of 5c square collets, I bought a 5c
collet block on Ebay for only $25 and will use the way the jig I
mentioned works.
I can easily mill the 10 degrees on at the end of one side. Now I
will have the best of both worlds. A indexable 5c collet block and
lathe bit grinder jig. Oh yeah, I also get a hex body besides the
square body!

http://cgi.ebay.com/COLLET-BLOCK-SET-5C-COLLET-COLLETS-NEW_W0QQitemZ390007623066QQcmdZViewItemQQptZLH_Def aultDomain_0?hash=item390007623066&_trksid=p3286.c 0.m14&_trkparms=66:2|65:1|39:1|240:1318

Rod
San Francisco

I need plans for a lathe bit grinding jig like this? Can a Home Shop Machinist help me out?
 

Al Patrick wrote:
rodjava wrote:
I want to build a lathe bit grinding jig like this one shown at ebay.
So I'm looking for some Home shop machinist plans that I can follow.
I've spent some time googling but could not find anything similar.

http://cgi.ebay.com/South-Bend-Lathe-tool-cutter-bit-grinding-block_W0QQitemZ360104956956QQcmdZViewItemQQptZLH_D efaultDomain_0?hash=item360104956956&_trksid=p3286 .c0.m14&_trkparms=72:1205|66:2|65:12|39:1|240:1318

Thank you in advance
Rod
San Francisco

It looks simple enough....a square based block (cube) with a square
hole in it of proper size and a 360 degree dial on the end. There's
probably a setscrew to lock the bit into the holder and the holder
into the block at the proper angle.
I'm still thinking you may need the tilting table to get the proper
rake.

Nah , just rotate the holder to the correct angle , hold the block at an
angle to the stone . Rotation in two axes can produce an exact angle in the
third . That's how trim guys cut the miter angles in crown mold that's laid
flat in the saw .
--
Snag
Cabinet shop project man . Ever seen a $40k reception desk ?

I need plans for a lathe bit grinding jig like this? Can a Home Shop Machinist help me out?
 

On Tue, 11 Nov 2008 16:22:44 -0800 (PST), rodjava
wrote:

I want to build a lathe bit grinding jig like this one shown at ebay.
So I'm looking for some Home shop machinist plans that I can follow.
I've spent some time googling but could not find anything similar.

http://cgi.ebay.com/South-Bend-Lathe-tool-cutter-bit-grinding-block_W0QQitemZ360104956956QQcmdZViewItemQQptZLH_D efaultDomain_0?hash=item360104956956&_trksid=p3286 .c0.m14&_trkparms=72:1205|66:2|65:12|39:1|240:1318

Thank you in advance
Rod
San Francisco


Rod:

Here are a couple of drawings for tool grinding jigs.

http://neme-s.org/How_To/

Errol Groff

I need plans for a lathe bit grinding jig like this? Can a Home Shop Machinist help me out?
 

Here is an example of a tool holder for grinding lathe cutting tools, which
is a fabricated deep broach in a section of round stock, clamped in a
rectangular block which allows for any desired angle setting

http://www.kwagmire.com/tools/broach_tool.html


WB
..........
metalworking projects
www.kwagmire.com/metal_proj.html


"rodjava" wrote in message
...
I want to build a lathe bit grinding jig like this one shown at ebay.
So I'm looking for some Home shop machinist plans that I can follow.
I've spent some time googling but could not find anything similar.

http://cgi.ebay.com/South-Bend-Lathe-tool-cutter-bit-grinding-block_W0QQitemZ360104956956QQcmdZViewItemQQptZLH_D efaultDomain_0?hash=item360104956956&_trksid=p3286 .c0.m14&_trkparms=72:1205|66:2|65:12|39:1|240:1318

Thank you in advance
Rod
San Francisco

I need plans for a lathe bit grinding jig like this? Can a HomeShop Machinist help me out?
 

On Nov 12, 3:50*pm, "Wild_Bill" wrote:
Here is an example of a tool holder for grinding lathe cutting tools, which
is a fabricated deep broach in a section of round stock, clamped in a
rectangular block which allows for any desired angle setting

*http://www.kwagmire.com/tools/broach_tool.html

WB
.........
metalworking projectswww.kwagmire.com/metal_proj.html

"rodjava" wrote in message

...



I want to build a lathe bit grinding jig like this one shown at ebay.
So I'm looking for some Home shop machinist plans that I can follow.
I've spent some time googling but could not find anything similar.

http://cgi.ebay.com/South-Bend-Lathe-tool-cutter-bit-grinding-block_W...66:2|65:12|39:1|240:1318

Thank you in advance
Rod
San Francisco- Hide quoted text -

- Show quoted text -

Thank you all that responded to my question.
My use of a 5c collet block and square collet is working out
perfectly!
I hope to post a picture of it in use in the near future.

Rod