install torque converter
The tranny went out on the kid's daily driver, a 1988 Mustang. We got the
old one out. For the life of us we can't get the torque converter on the new unit to drop in place. We get the flat and the first set of splines to drop in after much fiddling. No can do on the last one. Any tricks here? We've done this many times before without trouble. Karl |
install torque converter
"Karl Townsend" wrote in message ews.com... The tranny went out on the kid's daily driver, a 1988 Mustang. We got the old one out. For the life of us we can't get the torque converter on the new unit to drop in place. We get the flat and the first set of splines to drop in after much fiddling. No can do on the last one. Any tricks here? Sometimes it helps to stand the transmission on its tailshaft and drop the converter in, a short length of chain between two of the drive studs makes a handle. |
install torque converter
Sometimes it helps to stand the transmission on its tailshaft and drop the converter in, a short length of chain between two of the drive studs makes a handle. We had the unit standing on end. The handle is a good idea. We'll try that. Karl |
install torque converter
"Karl Townsend" wrote:
The tranny went out on the kid's daily driver, a 1988 Mustang. We got the old one out. For the life of us we can't get the torque converter on the new unit to drop in place. We get the flat and the first set of splines to drop in after much fiddling. No can do on the last one. Any tricks here? IRRC, two splines and a bisecting notch for the oil pump. Look deep to make sure you are picking up the oil pump. Wes |
install torque converter
"Karl Townsend" wrote in message ews.com... The tranny went out on the kid's daily driver, a 1988 Mustang. We got the old one out. For the life of us we can't get the torque converter on the new unit to drop in place. We get the flat and the first set of splines to drop in after much fiddling. No can do on the last one. Any tricks here? We've done this many times before without trouble. Karl You're such a good Dad! Your kids had better appreciate you...and pick out a GOOD nursing home when the time comes. |
install torque converter
You're such a good Dad! Your kids had better appreciate you...and pick out a GOOD nursing home when the time comes. Randy H. came to our township board with a developer's plan for a new Alzheimer's home in our area a while back... I told him I'd only support the plan if I could reserve the corner room for the future. So, I'm all set. Karl |
install torque converter
"Karl Townsend" wrote in message ews.com... The tranny went out on the kid's daily driver, a 1988 Mustang. We got the old one out. For the life of us we can't get the torque converter on the new unit to drop in place. We get the flat and the first set of splines to drop in after much fiddling. No can do on the last one. Any tricks here? We've done this many times before without trouble. Karl Sometimes its because the parts are not aligned parallel and you have to wobble the converter as you rotate it. Also sometimes the splines will catch enough to rotate when not in mesh and you have to back the converter out a bit and then rotate slightly. If there are replacement parts there is always the posssibility of a non-matching part. Don Young |
install torque converter
On Sun, 15 Jun 2008 22:40:18 -0500, with neither quill nor qualm,
"Karl Townsend" quickly quoth: You're such a good Dad! Your kids had better appreciate you...and pick out a GOOD nursing home when the time comes. Randy H. came to our township board with a developer's plan for a new Alzheimer's home in our area a while back... I told him I'd only support the plan if I could reserve the corner room for the future. So, I'm all set. Yabbut...how would you _know_? Meanwhile, back at the topic... Although I took A/T class at UTI, I didn't work on them when I was at the Ford dealership and was out of the automotive field in '86. Did you try rotating the output shaft or running the selector lever through its range while trying the converter? -- Besides the noble art of getting things done, there is a nobler art of leaving things undone. The wisdom of life consists in the elimination of nonessentials. -- Lin Yutang |
install torque converter
On Jun 15, 5:05 pm, "Karl Townsend"
wrote: The tranny went out on the kid's daily driver, a 1988 Mustang. We got the old one out. For the life of us we can't get the torque converter on the new unit to drop in place. We get the flat and the first set of splines to drop in after much fiddling. No can do on the last one. Any tricks here? We've done this many times before without trouble. Karl Karl I had the same problem once and solved the problem by asking my most critical neighbor over to help. It dropped right on as soon as Frank touch it. He looked at me as the most pitiable of creatures. I had wiggled, twisted, pushed for an hour or more and thought there was some secret Carl Boyd |
install torque converter
I had the same problem once and solved the problem by asking my most critical neighbor over to help. It dropped right on as soon as Frank touch it. He looked at me as the most pitiable of creatures. I had wiggled, twisted, pushed for an hour or more and thought there was some secret Can Frank come over to my place? I tried again today. No joy. Starting to **** me off. "The Kid" doesn't come back till Friday night so I got a few days. Karl |
install torque converter
On Mon, 16 Jun 2008 09:49:21 -0700 (PDT), Carl
wrote: On Jun 15, 5:05 pm, "Karl Townsend" wrote: The tranny went out on the kid's daily driver, a 1988 Mustang. We got the old one out. For the life of us we can't get the torque converter on the new unit to drop in place. We get the flat and the first set of splines to drop in after much fiddling. No can do on the last one. Any tricks here? We've done this many times before without trouble. Karl Karl I had the same problem once and solved the problem by asking my most critical neighbor over to help. It dropped right on as soon as Frank touch it. He looked at me as the most pitiable of creatures. I had wiggled, twisted, pushed for an hour or more and thought there was some secret Carl Boyd Personally, I love fixes that seem simple in hindsight. I might feel momentarily stupid, but mostly I feel relieved it wasn't a real bear of a problem, plus it's fixed. Pete Keillor |
All times are GMT +1. The time now is 04:07 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter